Data sheet
W-Series
WDK 2.5PE
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Klippon® Connect with clamping yoke Technology
The high reliability and variety of designs of the terminal
blocks with clamping yoke connections make planning
easer and optimises operational safety. Klippon®
Connect provides a proven response to a range of
different requirements.
General ordering data
Type
Order No.
Version
GTIN (EAN)
Qty.
WDK 2.5PE
1036300000
PE terminal, Double-tier terminal, Screw
connection, 2.5 mm², 300 A (2.5 mm²), green /
yellow
4008190297565
100 pc(s).
Creation date November 6, 2018 9:34:46 PM CET
Catalogue status 11.10.2018 / We reserve the right to make technical changes.
1
Data sheet
W-Series
WDK 2.5PE
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technical data
Dimensions and weights
Width
Height
Depth
Depth including DIN rail
Net weight
5.1 mm
69.5 mm
62.5 mm
63.5 mm
17.62 g
Width (inches)
Height (inches)
Depth (inches)
Weight
0.201 inch
2.736 inch
2.461 inch
18.1 g
-50 °C
Continuous operating temp., max.
120 °C
Wemid
V-0
Colour
green / yellow
KEMA98ATEX1687U
2.5 mm²
For operating temperature
range see EC Design
Test Certificate / IEC ExCertificate of Conformity
II 2 G D
Certificate No. (IECEX)
Wire cross section max. (IECEX)
Marking EN 60079-7
IECEXULD05.0008U
2.5 mm²
Screw connection, With
PE connection, One end
without connector
Yes
2
1
Yes
No
No
Tightening torque (clamping screw for
copper conductors)
Number of potentials
No. of clamping points per level
Levels cross-connected internally
Mounting rail
PE function
Yes
right
Number of similar terminals
Type of mounting
1
Snap-on
200039-1057876
26 AWG
Wire cross section max. (CSA)
12 AWG
Temperatures
Continuous operating temp., min.
Material data
Material
UL 94 flammability rating
Rating data IECEx/ATEX
Certificate No. (ATEX)
Wire cross section max. (ATEX)
Operating temperature range
Ex 2014/34/EU label
Ex eb II C Gb
System specifications
Version
End cover plate required
Number of levels
Number of potentials per tier
PE connection
N-function
PEN function
0.4...0.6 Nm
1
2
Yes
TS 35
Yes
Additional technical data
Explosion-tested version
Open sides
CSA rating data
Certificate No. (CSA)
Wire cross section min. (CSA)
Creation date November 6, 2018 9:34:46 PM CET
Catalogue status 11.10.2018 / We reserve the right to make technical changes.
2
Data sheet
W-Series
WDK 2.5PE
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technical data
Conductors for clamping (rated connection)
Clamping range, max.
Clamping screw
4 mm²
M 2.5
Connection cross-section, stranded, min. 1.5 mm²
Gauge to IEC 60947-1
A3
Stripping length
10 mm
Tightening torque, min.
0.4 Nm
Wire connection cross section, finely
stranded, max.
4 mm²
Wire connection cross-section, finely
stranded with wire-end ferrules DIN
46228/1, min.
0.5 mm²
Wire connection cross-section, finely
stranded with wire-end ferrules DIN
46228/4, min.
0.5 mm²
Wire connection cross-section, solid
core, max.
4 mm²
Clamping range, min.
Connection cross-section, stranded,
max.
Connection direction
Number of connections
Tightening torque, max.
Type of connection
Wire connection cross-section, finely
stranded with wire-end ferrules DIN
46228/1, max.
Wire connection cross-section, finely
stranded with wire-end ferrules DIN
46228/4, max.
Wire connection cross-section, finely
stranded, min.
0.05 mm²
4 mm²
top
4
0.6 Nm
Screw connection
2.5 mm²
2.5 mm²
0.5 mm²
Wire connection cross-section, solid
core, min.
32 mm
300 A (2.5 mm²)
PEN function
No
2.5 mm²
Rated voltage to adjoining terminal
Volume resistance according to IEC
60947-7-x
Pollution severity
400 V
0.5 mm²
Dimensions
TS 35 offset
PE rating data
Rated short-time current
Rating data
Rated cross-section
Standards
Rated impulse withstand voltage to
adjacent terminal
IEC 60947-7-2
6 kV
1.33 mΩ
3
UL rating data
Certificate No. (cURus)
E60693
Conductor size Factory wiring min.
(cURus)
26 AWG
Conductor size Field wiring min. (cURus) 22 AWG
Conductor size Factory wiring max.
(cURus)
12 AWG
Conductor size Field wiring max. (cURus)
12 AWG
ETIM 4.0
ETIM 6.0
eClass 5.1
eClass 7.1
eClass 9.0
Classifications
ETIM 3.0
ETIM 5.0
UNSPSC
eClass 6.2
eClass 8.1
eClass 9.1
EC000901
EC000491
30-21-18-11
27-14-03-05
27-14-11-41
27-14-11-20
EC000491
EC000897
27-14-03-05
27-14-03-05
27-14-11-41
Creation date November 6, 2018 9:34:46 PM CET
Catalogue status 11.10.2018 / We reserve the right to make technical changes.
3
Data sheet
W-Series
WDK 2.5PE
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technical data
Product information
Descriptive text technical data
Instructions for accessories
2.5 mm² conductor with ferrule with plastic collar, with the collar optimised for diameter only (order No.
1333100000, QTY 500).
Rail support protective insulation for installation of mounting rail "SH 2" order No. 0494920000 (QTY 10).
Approvals
Approvals
ROHS
Conform
Downloads
Approval/Certificate/Document of
Conformity
Brochure/Catalogue
Engineering Data
Engineering Data
CFAT_WDK 2.5PE.pdf
DE_PT1002_20160418_715_ISSUE01.pdf
CAT 1 TERM 16/17 EN
EPLAN, WSCAD, Zuken E3.S
STEP
Safety note
Safety notice
Safety Information
Creation date November 6, 2018 9:34:46 PM CET
Catalogue status 11.10.2018 / We reserve the right to make technical changes.
4
Data sheet
W-Series
WDK 2.5PE
Drawings
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Creation date November 6, 2018 9:34:46 PM CET
Catalogue status 11.10.2018 / We reserve the right to make technical changes.
5
很抱歉,暂时无法提供与“1036300000”相匹配的价格&库存,您可以联系我们找货
免费人工找货