1037300000

    Data sheet W-Series WPE 70/95 Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com     Klippon® Connect with clamping yoke Technology The high reliability and variety of designs of the terminal blocks with clamping yoke connections make planning easer and optimises operational safety. Klippon® Connect provides a proven response to a range of different requirements. General ordering data   Type Order No. Version GTIN (EAN) Qty.   WPE 70/95 1037300000 PE terminal, Screw connection, 95 mm², 11400 A (95 mm²), green / yellow 4008190495664 10 pc(s). Creation date November 7, 2018 2:03:12 PM CET   Catalogue status 11.10.2018 / We reserve the right to make technical changes. 1     Data sheet W-Series WPE 70/95   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions and weights   Width Height Depth Depth including DIN rail   27 mm 132 mm 107 mm 115.5 mm         Width (inches) Height (inches) Depth (inches) Net weight 1.063 inch 5.197 inch 4.213 inch 387.69 g -60 °C   Continuous operating temp., max. 130 °C Lead 7439-92-1     Wemid V-0     Colour   green / yellow DEMKO14ATEX1338U 120 mm² For operating temperature range see EC Design Test Certificate / IEC ExCertificate of Conformity II 2 G D       Certificate No. (IECEX) Wire cross section max. (IECEX) Marking EN 60079-7 IECEXULD14.0005U 120 mm²     Temperatures   Continuous operating temp., min.   Environmental Product Compliance   REACH SVHC   Material data   Material UL 94 flammability rating   Rating data IECEx/ATEX   Certificate No. (ATEX) Wire cross section max. (ATEX) Operating temperature range Ex 2014/34/EU label   Ex eb II C Gb System specifications   Version Tightening torque (clamping screw for copper conductors) Number of potentials No. of clamping points per level Levels cross-connected internally Mounting rail PE function   Screw connection, With PE  connection, closed   6...12 Nm   1   2   No   TS 35   Yes Tightening torque (mounting screw) End cover plate required 3...6 Nm Number of levels Number of potentials per tier PE connection N-function PEN function No 1 1 Yes No Yes Additional technical data   Explosion-tested version Interlock Open sides   Yes for screw fixing closed       Installation advice Number of similar terminals Type of mounting Screwed 1 Screwed 12400-382 6 AWG     Wire cross section max. (CSA)   00 AWG CSA rating data   Certificate No. (CSA) Wire cross section min. (CSA)   Creation date November 7, 2018 2:03:12 PM CET   Catalogue status 11.10.2018 / We reserve the right to make technical changes. 2     Data sheet W-Series WPE 70/95   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Conductors for clamping (rated connection)   Blade size Clamping range, min. Connection cross-section, stranded, max. Connection direction Number of connections Tightening torque, max. Type of connection Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max. Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max. Wire connection cross-section, finely stranded, min. Wire connection cross-section, solid core, min.   S6 (DIN 6911) 13.3 mm² 120 mm² on side 2 12 Nm Screw connection 95 mm² 50 mm² 16 mm² 16 mm²         Clamping range, max. 120 mm² Clamping screw M8 Connection cross-section, stranded, min. 16 mm² Gauge to IEC 60947-1 B12 Stripping length 30 mm Tightening torque, min. 6 Nm Wire connection cross section, finely stranded, max. 95 mm² Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min. 16 mm² Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min. 35 mm² Wire connection cross-section, solid core, max. 16 mm²           Centre screw on PE terminals PEN function M6 Yes     1,000 V   Rated voltage to adjoining terminal Volume resistance according to IEC 60947-7-x Pollution severity       Conductor size Factory wiring max. (UR) 00 AWG Conductor size Field wiring max. (UR) 00 AWG               ETIM 4.0 ETIM 6.0 eClass 5.1 eClass 7.1 eClass 9.0                 Dimensions   TS 35 offset   31.5 mm PE rating data   Rated short-time current 11400 A (95 mm²) Tightening torque range for fixing screw 3.0...6.0 Nm   Rating data   Rated cross-section Standards Rated impulse withstand voltage to adjacent terminal   95 mm² IEC 60947-7-2 8 kV 0.14 mΩ 3 UL rating data   Certificate No. (UR) E60693 Conductor size Factory wiring min. (UR) 6 AWG Conductor size Field wiring min. (UR) 6 AWG   Classifications   ETIM 3.0 ETIM 5.0 UNSPSC eClass 6.2 eClass 8.1 eClass 9.1   EC000901 EC000491 30-21-18-11 27-14-03-05 27-14-11-41 27-14-11-41 EC000491 EC000901 27-14-03-05 27-14-03-05 27-14-11-41 Product information   Descriptive text technical data Instructions for accessories   For 50 - 120 mm², the TS 35 x 15 (copper, 2.3 mm thick) mounting rail should be used. Rail support protective insulation for installation of mounting rail "SH 2" order No. 0494920000 (QTY 10). Creation date November 7, 2018 2:03:12 PM CET   Catalogue status 11.10.2018 / We reserve the right to make technical changes. 3     Data sheet W-Series WPE 70/95   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Approvals   Approvals ROHS   Conform Downloads   Approval/Certificate/Document of Conformity Brochure/Catalogue Engineering Data Engineering Data User Documentation   CFAT_WPE 70_95.pdf IECEXULD14.0005U_e.pdf DE_PT1002_20160414_262_ISSUE01.pdf ACF-ATEX_4786180920 CAT 1 TERM 16/17 EN EPLAN, WSCAD, Zuken E3.S STEP NTI_IECEx_WDU-WPE 70_95.pdf Safety note   Safety notice   Safety Information Creation date November 7, 2018 2:03:12 PM CET   Catalogue status 11.10.2018 / We reserve the right to make technical changes. 4     Data sheet W-Series WPE 70/95   Drawings Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Creation date November 7, 2018 2:03:12 PM CET   Catalogue status 11.10.2018 / We reserve the right to make technical changes. 5