1037720000

Product catalogue | Terminals | Screwing technology | W-series modular terminals | Modular feed-through terminals | WStandard | 2,5 mm² General ordering data Order No. Part designation Version EAN Qty. Product notes Note, ordering data Note, technical data Product description Note, accessories PT OKIECEx/ATEX rating data EU-type examination certificate Download, German Download English IECEx Certificate of Conformity Download ATEX voltage ATEX current ATEX conductor cross-section IECEx voltage IECEx current IECEx conductor cross-section Voltage when using cross-connections Operating temperature range 1037720000 WDU 2.5 GR Feed-through terminal, 2.5 mm², Screw connection, Wemid, grey, TS 35 4008190455149 100 pc(s). Rated voltage 400V when using cross-connection ZQV. See section "W-series accessories" for colours available. 2.5 mm² conductor with wire end ferrule plus plastic collar only with collar optimised for diameter (order No. 1333100000, 500 pcs) Their small size compared to the respective rated cross-section makes the modular terminals with the compact design very popular. Socket and test plug, see section "W Series accessories". Ensure 2.5 mm² max. when using the WQB. Shielding rail LS 2.8 1056400000. Marking EN 60079-7 Marking ATEX Directive 94/9/EC KEMA98ATEX1683U KEMA98ATEX1683U_d.pdf KEMA98ATEX1683U_e.pdf IECEXULD05.0008U IECEXULD05.0008U_e.pdf 550 V 21 A 2.5 mm² 550 V 20 A 2.5 mm² CrossConnectionGuide.pdf For operating temperature range see EC Design Test Certificate / IEC Ex-Certificate of Conformity Ex e II Ex II 2 G D 2 clampable conductors (H05V/H07V) with equal cross-section (rated connection) Solid, min. Solid, max. Flexible, min. Flexible, max. Flexible with ferrule, min. (DIN 46228 pt 1) Flexible with ferrule, max. (DIN 46228 pt 1) 0.5 mm² 1.5 mm² 0.5 mm² 1.5 mm² 0.5 mm² 1.5 mm² Additional technical data Colour of insulating material Connection direction grey on side -1- Product catalogue | Terminals | Screwing technology | W-series modular terminals | Modular feed-through terminals | WStandard | 2,5 mm² Additional technical data End plate required Explosion-tested version "Ex e" Installation advice Insulating material Levels cross-connected internally No. of identical terminals No. of levels No. of terminal strips per level Open sides Operating temperature range Product family Type of connection Type of mounting UL 94 flammability rating of insulation material Version Yes Yes TS 35 Wemid No 1 1 2 right - 50 °C, + 120 °C W-Series Screwed Snap-on V-0 Feed-through terminal CSA rating data Voltage (CSA) CSA current Min. cross-section (CSA) Max. cross-section (CSA) 600 V 20 A AWG 26 AWG 12 Conductors for clamping (rated connection) Clamping range, min. Clamping range, max. Type of connection 2nd type of connection Connection direction No. of connections Stripping length Clamping screw Blade size Tightening torque range Torque level with DMS electric screwdriver Gauge to IEC 60947-1 Solid, min. Solid, max. Stranded, min. Stranded, max. Flexible, min. Flexible, max. Flexible with ferrule, min. (DIN 46228/1) Flexible with ferrule, max. (DIN 46228/1) Flexible, min., ferrule with plastic collar (DIN 46228 pt 4) Flexible, max., ferrule with plastic collar (DIN 46228 pt 4) Twin wire-end ferrule, min. Twin wire end ferrule, max. AWG conductor size, min. AWG conductor size, max. 0.05 mm² 4 mm² Screw connection screwed on side 2 10 mm M 2.5 0.6 x 3.5 mm 0.4...0.8 Nm 1 A3 0.5 mm² 4 mm² 1.5 mm² 4 mm² 0.5 mm² 4 mm² 0.5 mm² 2.5 mm² 0.5 mm² 2.5 mm² 0.5 mm² 1.5 mm² AWG 30 AWG 12 -2- Product catalogue | Terminals | Screwing technology | W-series modular terminals | Modular feed-through terminals | WStandard | 2,5 mm² Conductors for clamping (rated connection) AWG conductor size, min. AWG conductor size, max. 0.05 mm² 3.31 mm² Dimensions Width Height of lowest version Length Weight TS 35 offset 5.1 mm 47 mm 60 mm 8.62 g 32 mm Disconnect terminals Torque level with DMS electric screwdriver 1 Rating data Rated cross-section Rated voltage Rated impulse voltage Rated current Standards Current with max. conductor Pollution severity 2.5 mm² 800 V 8 kV 24 A IEC 60947-7-1 32 A 3 UL rating data Voltage (UL) Current (UL) Min. cross-section (UL) Max. cross-section (UL) 600 V 25 A AWG 30 AWG 12 Approvals Approvals institutes Classifications eClass 4.1 eClass 5.0 eClass 5.1 27-14-11-20 27-14-11-20 27-14-11-20 -3- Product catalogue | Terminals | Screwing technology | W-series modular terminals | Modular feed-through terminals | WStandard | 2,5 mm² Similar products Order No. 1020000000 Part designation WDU 2.5 1020080000 WDU 2.5 BL 1020090000 WDU 2.5 GN 1020010000 WDU 2.5 SW 1020020000 WDU 2.5 GE 1037700000 WDU 2.5 PA/VI 1036800000 WDU 2.5 WS 1020700000 WDU 2.5/10 BEZ 1020800000 WDU 2.5/10 BEZ/NE 1020050000 WDU 2.5 WAP/GG 1024700000 WDU 2.5/1.5/ZR 1024780000 WDU 2.5/1.5/ZR BL Version Feed-through terminal, 2.5 mm², Screw connection, Wemid, dark beige, TS 35 Feed-through terminal, 2.5 mm², Screw connection, Wemid, blue, TS 35 Feed-through terminal, 2.5 mm², Screw connection, Wemid, green, TS 35 Feed-through terminal, 2.5 mm², Screw connection, Wemid, black, TS 35 Feed-through terminal, 2.5 mm², Screw connection, Wemid, yellow, TS 35 Feed-through terminal, 2.5 mm², Screw connection, PA 66, violet, TS 35 Feed-through terminal, 2.5 mm², Screw connection, Wemid, white, TS 35 Feed-through terminal, 2.5 mm², Screw connection, Wemid, dark beige, TS 35 Feed-through terminal, 2.5 mm², Screw connection, Wemid, dark beige, TS 35 Feed-through terminal, 2.5 mm², Screw connection, Wemid, green/ yellow, TS 35 Feed-through terminal, 2.5 mm², Screw connection, Wemid, dark beige, TS 35 Feed-through terminal, 2.5 mm², Screw connection, Wemid, blue, TS 35 -4-