1038680000

    Data sheet... SAK Series AKZ 4 WEMID BL Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com     The Weidmüller SAK feed-through terminals satisfy the requirements of IEC 60947-1 and are available with rated cross-sections from 0.08 mm² to 240 mm². General ordering data   Type Order No. GTIN (EAN) Qty.   AKZ 4 WEMID BL 1038680000 4032248774661 100 pc(s). Creation date October 2, 2013 10:04:30 PM CEST   Catalogue status / We reserve the right to make technical changes. 1     Data sheet... SAK Series AKZ 4 WEMID BL   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions and weights   Length Height Weight   27 mm 29 mm 5.93 g       Width Height of lowest version Net weight 6 mm 30.5 mm 5.84 g -50 °C     Storage temperature Continuous operating temp., max. 120 °C Temperatures   Operating temperature Continuous operating temp., min.   Rated data IECEx/ATEX   Certificate No. (ATEX) ATEX certificate IEC Ex certificate Current (ATEX) Voltage, cross-connection   SIRA02ATEX3001U SIRA02ATEX3001U_e.pdf   IECEXSIR05.0038U_e.pdf     28 A   ATEX certificate Certificate No. (IECEX) Max. voltage (ATEX) Wire cross section max. (ATEX) Operating temperature range Marking ATEX Directive 94/9/EC CrossConnectionGuide.pdf   II 2 G D     IECEXSIR05.0038U IECEXSIR05.0038U 275 V 4 mm² For operating temperature range see EC Design Test Certificate / IEC ExCertificate of Conformity Additional technical data   Explosion-tested version Type of mounting   Yes     Open sides Version right Screw connection, for screwable crossconnection, One end without connector       Voltage size C (CSA) Wire cross section max. (CSA)   300 V 12 AWG Snap-on CSA ratings data   Certificate No. (CSA) Current size C (CSA) Wire cross section min. (CSA)   154685-1372355 10 A 24 AWG Creation date October 2, 2013 10:04:30 PM CEST   Catalogue status / We reserve the right to make technical changes. 2     Data sheet... SAK Series AKZ 4 WEMID BL   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Clampable wires (rated connection)   Type of connection Screw connection Blade size 0.6 x 3.5 mm Number of connections 2 Clamping range, rated connection, max. 6 mm² Tightening torque, min. 0.6 Nm Torque level with DMS electric screwdriver 2 Wire connection cross section, solid core, max. rated connection 0.5 mm² Wire connection cross section, stranded, rated connection, min. 0.5 mm² Wire connection cross section, finely stranded, max. 4 mm² Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, rated connection, min. 0.5 mm² Cross-section for connected conductor, finely stranded with wire-end ferrules and plastic collars DIN 46228/4, rated connection, min. 0.5 mm² Twin wire-end ferrules, min. 0.5 mm² Wire connection cross section AWG, min. AWG 24                             Stripping length Connection direction Clamping range, rated connection, min. Clamping screw Tightening torque, max. Gauge to IEC 60947-1 8 mm on side 0.13 mm² M3 0.8 Nm A3 Wire connection cross section, solid core max. rated connection 6 mm² Wire connection cross section, stranded, rated connection, max. 4 mm² Wire connection cross-section, finely stranded, min. 0.5 mm² Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, rated connection, max. 2.5 mm² Wire connection cross-section, finely stranded with wire-end ferrules and plastic collars DIN 46228/4, rated connection, max. 2.5 mm² Twin wire-end ferrules, max. 1.5 mm² Wire connection cross section AWG, max. AWG 12 Dimensions   TS 15 offset TS 35 offset   13.5 mm 31 mm     TS 32 offset   31 mm 4 mm² 6 kV 41 A 3         Rated voltage Rated current Standards   400 V 32 A IEC 60947-7-1       Voltage size C (UR) 300 V Conductor size Factory wiring max. (UR) 12 AWG Conductor size Field wiring max. (UR) 12 AWG Wemid V-0     Colour   Blue SAK Series on side 2 No Yes           Type of connection Number of levels No. of clamping points per level Mounting rail   Screw connection 1 2 TS 15 Rated data   Rated cross-section Rated impulse withstand voltage Current at maximum wires Pollution severity   UL ratings data   Certificate No. (UR) E60693 Current size C (UR) 27 A Conductor size Factory wiring min. (UR) 26 AWG   Material data   Material UL 94 flammability rating   System specifications   Product family Connection direction Number of connections Levels cross-connected internally End cover plate required   Creation date October 2, 2013 10:04:30 PM CEST   Catalogue status / We reserve the right to make technical changes. 3     Data sheet... SAK Series AKZ 4 WEMID BL   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Classifications   ETIM 3.0 eClass 7.1   EC001283 27-14-11-20     eClass 6.2   27-14-11-20 Approvals   Approvals ROHS   Conform Creation date October 2, 2013 10:04:30 PM CEST   Catalogue status / We reserve the right to make technical changes. 4