1040400000

    Data sheet W-Series WDU 35N Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com     Klippon® Connect with clamping yoke Technology The high reliability and variety of designs of the terminal blocks with clamping yoke connections make planning easer and optimises operational safety. Klippon® Connect provides a proven response to a range of different requirements. General ordering data   Type Order No. Version GTIN (EAN) Qty.   WDU 35N 1040400000 Feed-through terminal, Screw connection, 35 mm², 500 V, 125 A, Dark Beige 4008190351816 20 pc(s). Creation date November 7, 2018 2:04:58 PM CET   Catalogue status 11.10.2018 / We reserve the right to make technical changes. 1     Data sheet W-Series WDU 35N   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions and weights   Width Height Depth Depth including DIN rail Net weight   16 mm 66 mm 50.5 mm 51 mm 48.104 g           Width (inches) Height (inches) Depth (inches) Weight   0.63 inch 2.598 inch 1.988 inch 52 g -60 °C   Continuous operating temp., max. 130 °C Wemid V-0     Colour   Dark Beige DEMKO14ATEX1338U 352 V 35 mm² 110 A Ex eb II C Gb           Certificate No. (IECEX) Current (ATEX) Max. voltage (IECEX) Wire cross section max. (IECEX) Ex 2014/34/EU label IECEXULD14.0005U 110 A 352 V 35 mm² II 2 G D Screw connection, for screwable crossconnection, closed No 1 1 No No Yes   Tightening torque (clamping screw for copper conductors)             Number of potentials No. of clamping points per level Levels cross-connected internally Mounting rail PE function   Temperatures   Continuous operating temp., min.   Material data   Material UL 94 flammability rating   Rating data IECEx/ATEX   Certificate No. (ATEX) Max. voltage (ATEX) Wire cross section max. (ATEX) Current (IECEX) Marking EN 60079-7   System specifications   Version End cover plate required Number of levels Number of potentials per tier PE connection N-function PEN function   4...5 Nm 1 2 No TS 35 No 2 clampable conductors (H05V/H07V) with equal cross-section (rated connection)   Wire connection cross section, finely stranded, two clampable wires, min. Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, 2 clampable wires, min.       Wire cross-section, finely stranded, two clampable wires, max. 6 mm² Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, 2 clampable wires, max. 6 mm² No closed     Number of similar terminals Type of mounting 1 Snap-on 12400-388 150 A 300 V 300 V 12 AWG           Current size B (CSA) Current size D (CSA) Voltage size C (CSA) Wire cross section max. (CSA)   120 A 10 A 600 V 2 AWG 2.5 mm² 2.5 mm² Additional technical data   Explosion-tested version Open sides   CSA rating data   Certificate No. (CSA) Current size C (CSA) Voltage size B (CSA) Voltage size D (CSA) Wire cross section min. (CSA)   Creation date November 7, 2018 2:04:58 PM CET   Catalogue status 11.10.2018 / We reserve the right to make technical changes. 2     Data sheet W-Series WDU 35N   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Conductors for clamping (rated connection)   Blade size Clamping range, min. Connection cross-section, stranded, max. Connection direction Number of connections Tightening torque, max. Type of connection Wire connection cross section AWG, min. Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max. Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max. Wire connection cross-section, finely stranded, min. Wire connection cross-section, solid core, min.   6.5 x 1.2 mm 2.5 mm² 50 mm² on side 2 5 Nm Screw connection AWG 12 35 mm² 35 mm² 2.5 mm² 2.5 mm²                         Clamping range, max. 50 mm² Clamping screw M6 Connection cross-section, stranded, min. 2.5 mm² Gauge to IEC 60947-1 B8 Stripping length 18 mm Tightening torque, min. 4 Nm Wire connection cross section AWG, max. AWG 10 Wire connection cross section, finely stranded, max. 35 mm² Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min. 2.5 mm² Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min. 2.5 mm² Wire connection cross-section, solid core, max. 16 mm²   Rating data   Rated cross-section Rated current Standards Rated impulse withstand voltage Surge voltage category   35 mm² 125 A           Rated voltage Current at maximum wires Volume resistance according to IEC 60947-7-x Pollution severity   E60693 12 AWG 12 AWG 1000 V         Conductor size Factory wiring max. (UR) 0 AWG Conductor size Field wiring max. (UR) 0 AWG Current size C (UR) 150 A   EC000897 EC000897 30-21-18-11 27-14-11-20 27-14-11-20 27-14-11-20             ETIM 4.0 ETIM 6.0 eClass 5.1 eClass 7.1 eClass 9.0   IEC 60947-7-1 6 kV III 500 V 150 A 0.26 mΩ 3 UL rating data   Certificate No. (UR) Conductor size Factory wiring min. (UR) Conductor size Field wiring min. (UR) Voltage size C (UR)   Classifications   ETIM 3.0 ETIM 5.0 UNSPSC eClass 6.2 eClass 8.1 eClass 9.1   EC000897 EC000897 27-14-11-20 27-14-11-20 27-14-11-20 Product information   Descriptive text ordering data Descriptive text technical data Instructions for accessories   1000 V UL and CSA for usage groups B and C: can be used with isolating DIN rails and when using WTW-EN partitions. 1000 V DC rated voltage tested. Cross-connections, see section "W series accessories". Creation date November 7, 2018 2:04:58 PM CET   Catalogue status 11.10.2018 / We reserve the right to make technical changes. 3     Data sheet W-Series WDU 35N   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Approvals   Approvals ROHS   Conform Downloads   Approval/Certificate/Document of Conformity Brochure/Catalogue Engineering Data Engineering Data User Documentation   CFAT_WDU 35N.pdf IECEXULD14.0005U_e.pdf DE_PT1001_20160414_191_ISSUE01.pdf ACF-ATEX_4786180920 CAT 1 TERM 16/17 EN EPLAN, WSCAD, Zuken E3.S STEP NTI_ IECEx_WDU-WPE 35N.pdf Safety note   Safety notice   Safety Information Creation date November 7, 2018 2:04:58 PM CET   Catalogue status 11.10.2018 / We reserve the right to make technical changes. 4     Data sheet W-Series WDU 35N   Drawings Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Creation date November 7, 2018 2:04:58 PM CET   Catalogue status 11.10.2018 / We reserve the right to make technical changes. 5