1041620000

    Data sheet W-Series WDK 2.5N PE Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com     Klippon® Connect with clamping yoke Technology The high reliability and variety of designs of the terminal blocks with clamping yoke connections make planning easer and optimises operational safety. Klippon® Connect provides a proven response to a range of different requirements. General ordering data   Type Order No. Version GTIN (EAN) Qty.   WDK 2.5N PE 1041620000 PE terminal, Double-tier terminal, Screw connection, 2.5 mm², 300 A (2.5 mm²), green / yellow 4032248138579 100 pc(s). Creation date November 7, 2018 2:11:05 PM CET   Catalogue status 11.10.2018 / We reserve the right to make technical changes. 1     Data sheet W-Series WDK 2.5N PE   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions and weights   Width Height Depth Depth including DIN rail   5.1 mm 60.7 mm 54.95 mm 62.45 mm         Width (inches) Height (inches) Depth (inches) Net weight 0.201 inch 2.39 inch 2.163 inch 16.984 g -50 °C   Continuous operating temp., max. 120 °C Wemid V-0     Colour   green / yellow KEMA00ATEX2061U 2.5 mm² For operating temperature range see EC Design Test Certificate / IEC ExCertificate of Conformity II 2 G D       Certificate No. (IECEX) Wire cross section max. (IECEX) Marking EN 60079-7 IECEXULD05.0008U 2.5 mm²     Temperatures   Continuous operating temp., min.   Material data   Material UL 94 flammability rating   Rating data IECEx/ATEX   Certificate No. (ATEX) Wire cross section max. (ATEX) Operating temperature range Ex 2014/34/EU label   Ex eb II C Gb System specifications   Version End cover plate required Number of levels Number of potentials per tier PE connection N-function PEN function     Screw connection, Vertically cross-connected, With PE connection, One end without connector   Yes   2   1   Yes   No   No Tightening torque (clamping screw for copper conductors) Number of potentials No. of clamping points per level Levels cross-connected internally Mounting rail PE function   0.4...0.6 Nm 1 2 Yes TS 35 Yes Additional technical data   Explosion-tested version Open sides   Yes right     Number of similar terminals Type of mounting 1 Snap-on 200039-1057876 26 AWG     Wire cross section max. (CSA)   12 AWG CSA rating data   Certificate No. (CSA) Wire cross section min. (CSA)   Creation date November 7, 2018 2:11:05 PM CET   Catalogue status 11.10.2018 / We reserve the right to make technical changes. 2     Data sheet W-Series WDK 2.5N PE   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Conductors for clamping (rated connection)   Blade size Clamping range, min. Connection cross-section, stranded, max. Connection direction Number of connections Tightening torque, max. Torque level with DMS electric screwdriver Wire connection cross section AWG, max. Wire connection cross section, finely stranded, max. Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min. Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min. Wire connection cross-section, solid core, max.   0.6 x 3.5 mm 0.05 mm² 4 mm² on side 4 0.6 Nm 1 AWG 12 4 mm² 0.5 mm² 0.5 mm² 4 mm²                         Clamping range, max. 4 mm² Clamping screw M 2.5 Connection cross-section, stranded, min. 1.5 mm² Gauge to IEC 60947-1 A3 Stripping length 8 mm Tightening torque, min. 0.4 Nm Type of connection Screw connection Wire connection cross section AWG, min. AWG 26 Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max. 2.5 mm² Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max. 2.5 mm² Wire connection cross-section, finely stranded, min. 0.5 mm² Wire connection cross-section, solid core, min. 0.5 mm² PE rating data   Rated short-time current   300 A (2.5 mm²)   PEN function No 2.5 mm²     800 V   Rated voltage to adjoining terminal Volume resistance according to IEC 60947-7-x Pollution severity             ETIM 4.0 ETIM 6.0 eClass 5.1 eClass 7.1 eClass 9.0   EC000491 EC000897 27-14-03-05 27-14-03-05 27-14-11-20 Rating data   Rated cross-section Standards Rated impulse withstand voltage to adjacent terminal   IEC 60947-7-2 8 kV 1.33 mΩ 3 Classifications   ETIM 3.0 ETIM 5.0 UNSPSC eClass 6.2 eClass 8.1 eClass 9.1   EC000901 EC000491 30-21-18-11 27-14-03-05 27-14-11-20 27-14-11-20 Product information   Descriptive text technical data Instructions for accessories   2.5 mm² conductor with ferrule with plastic collar, with the collar optimised for diameter only (order No. 1333100000, QTY 500). Rail support for protective-insulated installation of mounting rail "SH 2", order no. 0494920000 (QTY 10). Cross-connections, see section "W series accessories". Creation date November 7, 2018 2:11:05 PM CET   Catalogue status 11.10.2018 / We reserve the right to make technical changes. 3     Data sheet W-Series WDK 2.5N PE   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Approvals   Approvals ROHS   Conform Downloads   Approval/Certificate/Document of Conformity Brochure/Catalogue Engineering Data Engineering Data   CFAT_WDK 2.5N PE.pdf DE_PT1001_20160418_712_ISSUE01.pdf CAT 1 TERM 16/17 EN EPLAN, WSCAD, Zuken E3.S STEP Safety note   Safety notice   Safety Information Creation date November 7, 2018 2:11:05 PM CET   Catalogue status 11.10.2018 / We reserve the right to make technical changes. 4     Data sheet W-Series WDK 2.5N PE   Drawings Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Creation date November 7, 2018 2:11:05 PM CET   Catalogue status 11.10.2018 / We reserve the right to make technical changes. 5