1042680000

Product catalogue | Terminals | Screwing technology | W-series modular terminals | Modular feed-through terminals | WCompact | 4 mm² General ordering data Order No. Part designation Version EAN Qty. Product notes Product description PT OKIECEx/ATEX rating data EU-type examination certificate Download, German Download English ATEX voltage ATEX current ATEX conductor cross-section Voltage when using cross-connections Operating temperature range 1042680000 WDU 4N BL Feed-through terminal, 4 mm², Screw connection, Wemid, blue, TS 35 4032248273225 100 pc(s). Their small size compared to the respective rated cross-section makes the modular terminals with the compact design very popular. Marking EN 60079-7 Marking ATEX Directive 94/9/EC TÜV04ATEX2630U TÜV04ATEX2630U_d.pdf TÜV04ATEX2630U_e.pdf 440 V 27 A 4 mm² CrossConnectionGuide.pdf For operating temperature range see EC Design Test Certificate / IEC Ex-Certificate of Conformity Ex e II Ex II 2 G D 2 clampable conductors (H05V/H07V) with equal cross-section (rated connection) Solid, min. Solid, max. Flexible, min. Flexible, max. Flexible with ferrule, min. (DIN 46228 pt 1) Flexible with ferrule, max. (DIN 46228 pt 1) 0.5 mm² 1.5 mm² 0.5 mm² 1.5 mm² 0.5 mm² 1.5 mm² -1- Product catalogue | Terminals | Screwing technology | W-series modular terminals | Modular feed-through terminals | WCompact | 4 mm² Additional technical data Colour of insulating material Connection direction End plate required Explosion-tested version "Ex e" Installation advice Insulating material Levels cross-connected internally No. of identical terminals No. of levels No. of terminal strips per level Open sides Operating temperature range Product family Type of connection Type of mounting UL 94 flammability rating of insulation material Version blue on side Yes No TS 35 Wemid No 1 1 2 right - 50 °C, + 120 °C W-Series Screwed Snap-on V-0 Feed-through terminal CSA rating data Voltage (CSA) CSA current Min. cross-section (CSA) Max. cross-section (CSA) 300 V 10 A AWG 26 AWG 10 Conductors for clamping (rated connection) Clamping range, min. Clamping range, max. Type of connection 2nd type of connection Connection direction No. of connections Stripping length Clamping screw Blade size Tightening torque range Torque level with DMS electric screwdriver Gauge to IEC 60947-1 Solid, min. Solid, max. Stranded, min. Stranded, max. Flexible, min. Flexible, max. Flexible with ferrule, min. (DIN 46228/1) Flexible with ferrule, max. (DIN 46228/1) Flexible, min., ferrule with plastic collar (DIN 46228 pt 4) Flexible, max., ferrule with plastic collar (DIN 46228 pt 4) Twin wire-end ferrule, min. Twin wire end ferrule, max. 0.13 mm² 6 mm² Screw connection screwed on side 2 11 mm M3 0.6 x 3.5 mm 0.5...1.0 Nm 2 A4 0.5 mm² 6 mm² 1.5 mm² 6 mm² 0.5 mm² 4 mm² 0.5 mm² 4 mm² 0.5 mm² 4 mm² 0.5 mm² 1.5 mm² -2- Product catalogue | Terminals | Screwing technology | W-series modular terminals | Modular feed-through terminals | WCompact | 4 mm² Conductors for clamping (rated connection) AWG conductor size, min. AWG conductor size, max. AWG conductor size, min. AWG conductor size, max. AWG 26 AWG 10 0.13 mm² 5.26 mm² Dimensions Width Height of lowest version Length TS 35 offset 6.1 mm 38.5 mm 44 mm 24.5 mm Disconnect terminals Torque level with DMS electric screwdriver 2 Rating data Rated cross-section Rated voltage Rated impulse voltage Rated current Standards Current with max. conductor Pollution severity 4 mm² 500 V 6 kV 32 A IEC 60947-7-1 39 A 3 UL rating data Voltage (UL) Current (UL) Min. cross-section (UL) Max. cross-section (UL) 300 V 10 A AWG 26 AWG 12 Approvals Approvals institutes Classifications eClass 4.1 eClass 5.0 eClass 5.1 27-14-11-20 27-14-11-20 27-14-11-20 Similar products Order No. 1042600000 Part designation WDU 4N Version Feed-through terminal, 4 mm², Screw connection, Wemid, dark beige, TS 35 -3-