1062290000

    Data sheet... W-Series WTR 2.5 STB2.3 RT Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com     The versatile and extensive range of products - from 0.05 mm² to 300 mm² - means that you have diverse options for your applications at your disposal. Hardened steel for mechanical strength and high-quality tinned copper for optimum conductivity. All materials comply with RoHS requirements and have been tested to current environment guidelines. General ordering data   Order No. Type Version GTIN (EAN) Qty.   1062290000 WTR 2.5 STB2.3 RT W-Series, Test-disconnect terminal, Rated crosssection: 2.5 mm², Screw connection, Direct mounting 4032248821518 100 pc(s). Creation date May 23, 2013 11:58:43 PM CEST   Catalogue status 27.9.2012 / We reserve the right to make technical changes. 1     Data sheet... W-Series WTR 2.5 STB2.3 RT   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions and weights   Length Height Weight   60 mm 48 mm 10.7 g       Width Height of lowest version Net weight 5.1 mm 49 mm 9.72 g -50 °C     Storage temperature Continuous operating temp., max. 120 °C Temperatures   Operating temperature Continuous operating temp., min.   2 clampable wires (H05V/H07V) same cross-section (rated connection)   Wire connection cross section, finely stranded, two clampable wires, min. Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, 2 clampable wires, min.   0.5 mm²     Wire cross-section, finely stranded, two clampable wires, max. 1.5 mm² Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, 2 clampable wires, max. 1.5 mm²       Installation advice Open sides Version Direct mounting right Screw connection, Disconnection element, with sockets, for plug-in cross-connector, One end without connector             Stripping length Connection direction Clamping range, rated connection, min. Clamping screw Tightening torque, max. Gauge to IEC 60947-1 10 mm on side 0.05 mm² M3 0.7 Nm 0.5 mm² Additional technical data   Explosion-tested version Number of similar terminals Type of mounting   No 1 Snap-on Clampable wires (rated connection)   Type of connection Screw connection Blade size 0.6 x 3.5 mm Number of connections 2 Clamping range, rated connection, max. 4 mm² Tightening torque, min. 0.5 Nm Torque level with DMS electric screwdriver 1 Wire connection cross section, solid core, max. rated connection 0.5 mm² Wire connection cross section, stranded, rated connection, min. 1.5 mm² Wire connection cross section, finely stranded, max. 4 mm² Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, rated connection, min. 0.5 mm² Cross-section for connected conductor, finely stranded with wire-end ferrules and plastic collars DIN 46228/4, rated connection, min. 0.5 mm² Wire connection cross section AWG, min. AWG 30               A3 Wire connection cross section, solid core max. rated connection 4 mm² Wire connection cross section, stranded, rated connection, max. 4 mm² Wire connection cross-section, finely stranded, min. 0.5 mm² Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, rated connection, max. 2.5 mm² Wire connection cross-section, finely stranded with wire-end ferrules and plastic collars DIN 46228/4, rated connection, max. 2.5 mm² Wire connection cross section AWG, max. AWG 12 Dimensions   TS 35 offset   32 mm     Creation date May 23, 2013 11:58:43 PM CEST   Catalogue status 27.9.2012 / We reserve the right to make technical changes. 2     Data sheet... W-Series WTR 2.5 STB2.3 RT   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Disconnect terminals   Cross-disconnect Slitting Tightening torque, min.         Integral test socket Tightening torque, max. Torque level with DMS electric screwdriver No 0.7 Nm         Rated voltage Rated current Standards   500 V 24 A IEC 60947-7-1       Voltage size C (UR) 300 V Conductor size Factory wiring max. (UR) 12 AWG Conductor size Field wiring max. (UR) 12 AWG Wemid V-0     Colour   Red W-Series on side 2 No Yes           Type of connection Number of levels No. of clamping points per level Mounting rail   Screw connection 1 2 TS 35 EC000902 27-14-11-26     eClass 6.2   27-14-11-26 without without 0.5 Nm 1 Rated data   Rated cross-section Rated impulse withstand voltage Current at maximum wires Pollution severity   2.5 mm² 6 kV 24 A 3 UL ratings data   Certificate No. (UR) E60693VOL1SEC68 Current size C (UR) 20 A Conductor size Factory wiring min. (UR) 30 AWG   Material data   Material UL 94 flammability rating   System specifications   Product family Connection direction Number of connections Levels cross-connected internally End cover plate required   Classifications   ETIM 3.0 eClass 7.1   Approvals   Approvals ROHS   Conform Creation date May 23, 2013 11:58:43 PM CEST   Catalogue status 27.9.2012 / We reserve the right to make technical changes. 3