1090600000

OMNIMATE Power PCB Connectors Connectors in 7.62 mm pitch - Series BV/SV 7.62 - connects up to 6 mm² Explanation OMNIMATE Power BV / SV 7.62HP Hybrid – for power, signals and EMC Three functions in one! The OMNIMATE Power Hybrid connector provides developers and users with the perfect three-in-one solution. The hybrid motor connector can simultaneously connect power, signals and a pluggable EMC shield. This allows you to save space on the circuit board, on the outside of the housing and in the electrical cabinet. The self-locking one-handed interlock mechanism requires only one plugging step and thus speeds up installation and maintenance procedures. It is easy to handle and interlocks automatically – even in difficult installation positions. The unique shielding shape with 30° cable entry enable a space savings of up to 10 cm between rows. F Unique safety Safe, EMC-compliant shield connection for any application situation and with no risk of error. Unique integration Three-in-one solution: pluggable shield support, integrated signal contacts, and one-handed security flange. Unique component density More space available on the PCB providing for denser component assemblies, and more space available on the housing wall because of true-to-pitch integration of the signal contacts – while maintaining the same width! F.46 Unique interaction Plug & Work with intuitive handling: featuring tool-free onehanded operation with automatic snap-in and also “blind” plugging of power, signals and shielding simultaneously. OMNIMATE Power PCB Connectors Connectors in 7.62 mm pitch - Series BV/SV 7.62 - connects up to 6 mm² Explanation EMC in theory and in the real world F The motor feedback (signal feedback from temperature/ encoder) in hybrid, shield-within-shield motor cables is usually made from over-sized power contacts or from disconnected I/O connectors. It also normally requires two separate shield connections. During installation and repairs (replacement), it is possible that the shield terminals could be incorrectly connected, left disconnected or lost. With conventional shielding, it can be quite difficult to tighten the flange screws when the connection is located at a difficult to reach location. So this step is often neglected in the real world. Reliably avoiding interferences Topology of parasitic currents low parasitic currents high parasitic currents Source: Frauenhofer IZM Unique innovation Integrating functions, optimising processes, and reducing complexity: The conventional 2 outer flanges have simply been replaced by 1 middle flange, 4 signal contacts and 1 pluggable shield support. As a result, malfunctions can then be caused by the coupling of electromagnetic fields within the sensitive electronics. The pluggable, hybrid shield support features a special EMC spring-contact strip which ensures that the shield connection to the housing is permanent, vibration-proof and covers a large surface area. It allows the shielding braid from the power and signal wires to be connected separately – and enables this to be done automatically in one step so that it is not dependent on the user. F.47 SV 7.62HP/../90 & SC 3.81 Product data SV 7.62HP/../90 SC/..R IEC: 1000 V / 41 A UL: 300 V / 35 A For additional articles and information, refer to catalog.weidmueller.com Hybrid-header in 90° outlet direction with power and signal contacts. Meets the enhanced requirements of IEC 61800-5-1 for 3 mm touch safety in 400 V TNC (S) networks and enables UL approval for 600 V in accordance with UL508 / UL840. The middle flange interlocks automatically. It decreases the space required by one pole when compared to other solutions. • Available with a middle flange (MF). Note: • Technical specifications refer to the power contacts • Technical specifications of signal contacts: 50V / 5A • Rated current related to rated cross-section and min. No. of poles. • Specifications of diagram: P1=7.62 mm; P2=3.81 mm • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. Dimensioned drawing L1 + P1 + O 11,4 0.449" 5,7 0.224" OMNIMATE Power PCB Connectors Connectors in 7.62 mm pitch Series BV/SV 7.62 – connects up to 6 mm² 28,3 1.114" 8 13,3 0.315" 0.524" 19,8 0.78" L2 O = L2 + 4,8 O = L2 + 0.189" L1 Ø 1,3 + 0,1 Ø 0.051" P1 P1 Ø 1,2 + 0,1 Ø 0.047" P2 F P2 Technical data In compliance with IEC 60664-1 / IEC 61984 Clamping range, max. mm² Solid core H05(07) V-U mm² Stranded H07 V-R Flexible H05(07) V-K mm² Flexible with ferrule mm² Ferrule with plastic collar mm² Stripping length mm mm Screwdriver blade According to norm Tightening torque range Nm Rated current, max. A 41 41 At ambient temperature 20°C 40°C For conductor cross-section mm² Overvoltage category III III II Pollution severity 3 2 2 Rated voltage V 630 630 1000 Rated impulse voltage kV 6 6 6 UL / CUL (Use Group) B C D Rated voltage V 300 300 600 Rated current A 35 35 5 AWG conductor AWG CSA (Use Group) B C D Rated voltage V 300 300 600 Rated current A 35 35 5 AWG conductor AWG General data Type of insulation material PA GF Flammability class UL 94 V-0 Contact base material Copper alloy Material of contact surface tinned Pin dimensions = d 0.8 x 1.0 mm Solder eyelet Ø = D mm 1.3 Solder eyelet Ø tolerance + 0,1 mm F.98 Accessories Ordering data Note: Refer to the Accessories chapter for additional accessories. Coding Order No. BV/SV 7.62HP KO 1937590000 Solder pin length 3.5 mm Colour Pitch Pol. 2/4 2/6 2/8 3/4 3/6 3/8 4/4 4/6 4/8 5/4 5/6 5/8 L1 7.62 7.62 7.62 15.24 15.24 15.24 22.86 22.86 22.86 30.48 30.48 30.48 black 7.62 mm (inch) 0.300 0.300 0.300 0.600 0.600 0.600 0.900 0.900 0.900 1.200 1.200 1.200 L2 3.81 7.62 11.43 3.81 7.62 11.43 3.81 7.62 11.43 3.81 7.62 11.43 (inch) 0.150 0.300 0.450 0.150 0.300 0.450 0.150 0.300 0.450 0.150 0.300 0.450 Qty. 78 72 60 60 54 48 48 42 42 36 36 36 Order No. 1089840000 1089920000 1157040000 1090040000 1090120000 1157050000 1090280000 1090360000 1157380000 1090520000 1090590000 1157080000 SV 7.62HP/../90MF. SC/..R SV 7.62HP/../90MSF. SC/..R Dimensioned drawing Dimensioned drawing 8 13,3 0.524" 0.315" L2 O = L2 + 4,8 O = L2 + 0.189" L1 + P1 + O 19,8 0.78" L1 Ø 1,3 + 0,1 Ø 0.051" P1 11,4 0.448" Ø 1,2 + 0,1 Ø 0.047" Ø 3,5 Ø 0.143" P2 Ø 3,5 Ø 0.143" Ø 1,3 + 0,1 Ø 0.051" P1 P1 Ordering data Ordering data Solder pin length 3.5 mm Colour Pol. 2/4 2/6 2/8 3/4 3/4 3/6 3/6 3/8 3/8 4/4 4/6 4/8 5/4 5/4 5/6 5/6 5/8 5/8 L1 7.62 7.62 7.62 15.24 15.24 15.24 15.24 15.24 15.24 22.86 22.86 22.86 30.48 30.48 30.48 30.48 30.48 30.48 black 7.62 mm (inch) 0.300 0.300 0.300 0.600 0.600 0.600 0.600 0.600 0.600 0.900 0.900 0.900 1.200 1.200 1.200 1.200 1.200 1.200 F Ø 1,2 + 0,1 Ø 0.047" P2 P2 Pitch 13,3 0.315" 0.524" 19,8 0.78" P1 11,4 0.448" P1 8 L2 O = L2 + 4,8 O = L2 + 0.189" L1 + P1 + O P2 L1 28,3 1.114" 11,4 5,7 0.449" 0.224" 11,4 5,7 0.449" 0.224" 28,3 1.114" P1 OMNIMATE Power PCB Connectors Connectors in 7.62 mm pitch Series BV/SV 7.62 – connects up to 6 mm² L2 3.81 7.62 11.43 3.81 3.81 7.62 7.62 11.43 11.43 3.81 7.62 11.43 3.81 3.81 7.62 7.62 11.43 11.43 Solder pin length Pitch (inch) 0.150 0.300 0.450 0.150 0.150 0.300 0.300 0.450 0.450 0.150 0.300 0.450 0.150 0.150 0.300 0.300 0.450 0.450 Qty. 60 54 48 48 48 42 42 42 42 36 36 36 30 30 30 30 30 30 Order No. 1089370000 1089410000 1156820000 1156230000 1089660000 1156240000 1089730000 1156840000 1156850000 1090130000 1090210000 1156890000 1156910000 1090600000 1156930000 1090670000 1156950000 1156980000 3.5 mm Colour Pol. 2/4 2/6 2/8 3/4 3/4 3/6 3/6 3/8 3/8 4/4 4/6 4/8 5/4 5/4 5/6 5/6 5/8 5/8 L1 7.62 7.62 7.62 15.24 15.24 15.24 15.24 15.24 15.24 22.86 22.86 22.86 30.48 30.48 30.48 30.48 30.48 30.48 black 7.62 mm (inch) 0.300 0.300 0.300 0.600 0.600 0.600 0.600 0.600 0.600 0.900 0.900 0.900 1.200 1.200 1.200 1.200 1.200 1.200 L2 3.81 7.62 11.43 3.81 3.81 7.62 7.62 11.43 11.43 3.81 7.62 11.43 3.81 3.81 7.62 7.62 11.43 11.43 (inch) 0.150 0.300 0.450 0.150 0.150 0.300 0.300 0.450 0.450 0.150 0.300 0.450 0.150 0.150 0.300 0.300 0.450 0.450 Qty. 60 54 48 48 48 42 42 42 42 36 36 36 30 30 30 30 30 30 Order No. 1089510000 1089570000 1156830000 1156250000 1089890000 1156270000 1089970000 1156870000 1156880000 1090370000 1090450000 1156900000 1157000000 1090830000 1157010000 1090900000 1157020000 1157030000 F.99 SV 7.62HP/../270 & SC 3.81 Product data SV 7.62HP/../270 SC/..R IEC: 1000 V / 41 A UL: 300 V / 35 A For additional articles and information, refer to catalog.weidmueller.com Dimensioned drawing 19,8 8 0.78" 0.315" L2 5,7 0.224" Hybrid male header in 270° outlet direction with power and signal contacts. Meets the enhanced requirements of IEC 61800-5-1 for 3 mm touch safety in 400 V TNC (S) networks and enables UL approval for 600 V in line with UL508 / UL840. The middle flange interlocks automatically. It decreases the space required by one pole when compared to other solutions. • Available with a middle flange (MF). Note: • Technical specifications refer to the power contacts • Technical specifications of signal contacts: 50V / 5A • Rated current related to rated cross-section and min. No. of poles. • Specifications of diagram: P1=7.62 mm; P2=3.81 mm • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. 11,4 0.449" OMNIMATE Power PCB Connectors Connectors in 7.62 mm pitch Series BV/SV 7.62 – connects up to 6 mm² O = L2 + 4,8 O = L2 + 0.189" L1 + P1 + O L1 Ø 1,3 + 0,1 P1 Ø 0.051" 13,3 0.524" P1 28,3 1.114" Ø 1,2 + 0,1 Ø 0.047" P2 F P2 Technical data In compliance with IEC 60664-1 / IEC 61984 Clamping range, max. mm² Solid core H05(07) V-U mm² Stranded H07 V-R Flexible H05(07) V-K mm² Flexible with ferrule mm² Ferrule with plastic collar mm² Stripping length mm mm Screwdriver blade According to norm Tightening torque range Nm Rated current, max. A 41 41 At ambient temperature 20°C 40°C For conductor cross-section mm² Overvoltage category III III II Pollution severity 3 2 2 Rated voltage V 630 630 1000 Rated impulse voltage kV 6 6 6 UL / CUL (Use Group) B C D Rated voltage V 300 300 600 Rated current A 35 35 5 AWG conductor AWG CSA (Use Group) B C D Rated voltage V 300 300 600 Rated current A 35 35 5 AWG conductor AWG General data Type of insulation material PA GF Flammability class UL 94 V-0 Contact base material Copper alloy Material of contact surface tinned Pin dimensions = d 0.8 x 1.0 mm Solder eyelet Ø = D mm 1.3 Solder eyelet Ø tolerance + 0,1 mm F.100 Accessories Ordering data Note: Refer to the Accessories chapter for additional accessories. Coding Order No. BV/SV 7.62HP KO 1937590000 Solder pin length 3.5 mm Colour Pitch Pol. 2/4 2/6 2/8 3/4 3/6 3/8 4/4 4/6 4/8 5/4 5/6 5/8 L1 7.62 7.62 7.62 15.24 15.24 15.24 22.86 22.86 22.86 30.48 30.48 30.48 black 7.62 mm (inch) 0.300 0.300 0.300 0.600 0.600 0.600 0.900 0.900 0.900 1.200 1.200 1.200 L2 3.81 7.62 11.43 3.81 7.62 11.43 3.81 7.62 11.43 3.81 7.62 11.43 (inch) 0.150 0.300 0.450 0.150 0.300 0.450 0.150 0.300 0.450 0.150 0.300 0.450 Qty. 78 72 60 60 54 48 48 42 42 36 36 36 Order No. 1090770000 1090850000 1156920000 1090950000 1091010000 1156940000 1091120000 1091160000 1156970000 1091240000 1091260000 1156990000 SV 7.62HP/../270MF. SC/..R SV 7.62HP/../270MSF. SC/..R Dimensioned drawing 19,8 8 0.78" 0.315" 19,8 8 0.78" 0.315" L2 11,4 0.449" 11,4 0.449" L2 5,7 0.224" 5,7 0.224" Dimensioned drawing O = L2 + 4,8 O = L2 + 0.189" L1 + P1 + O O = L2 + 4,8 O = L2 + 0.189" L1 + P1 + O 13,3 0.524" 28,3 1.114" L1 Ø 1,3 + 0,1 Ø 0.051" P1 11,4 0.448" Ø 1,2 + 0,1 Ø 0.047" Ø 3,5 Ø 0.143" P2 Ø 3,5 Ø 0.143" Ø 1,3 + 0,1 Ø 0.051" P1 P1 P1 11,4 0.448" P1 P2 Ordering data Solder pin length 3.5 mm Colour L1 7.62 7.62 7.62 15.24 15.24 15.24 15.24 15.24 15.24 22.86 22.86 22.86 30.48 30.48 30.48 30.48 30.48 30.48 black 7.62 mm (inch) 0.300 0.300 0.300 0.600 0.600 0.600 0.600 0.600 0.600 0.900 0.900 0.900 1.200 1.200 1.200 1.200 1.200 1.200 F Ø 1,2 + 0,1 Ø 0.047" P2 Ordering data Pitch 13,3 28,3 0.524" 1.114" P2 L1 P1 Pol. 2/4 2/6 2/8 3/4 3/4 3/6 3/6 3/8 3/8 4/4 4/6 4/8 5/4 5/4 5/6 5/6 5/8 5/8 OMNIMATE Power PCB Connectors Connectors in 7.62 mm pitch Series BV/SV 7.62 – connects up to 6 mm² L2 3.81 7.62 11.43 3.81 3.81 7.62 7.62 11.43 11.43 3.81 7.62 11.43 3.81 3.81 7.62 7.62 11.43 11.43 Solder pin length Pitch (inch) 0.150 0.300 0.450 0.150 0.150 0.300 0.300 0.450 0.450 0.150 0.300 0.450 0.150 0.150 0.300 0.300 0.450 0.450 Qty. 60 54 48 48 48 42 42 42 42 36 36 36 30 30 30 30 30 30 Order No. 1089260000 1089280000 1156120000 1156140000 1089440000 1156150000 1089490000 1156170000 1156180000 1089820000 1089910000 1156280000 1156300000 1090300000 1156310000 1090380000 1156320000 1156340000 3.5 mm Colour Pol. 2/4 2/6 2/8 3/4 3/4 3/6 3/6 3/8 3/8 4/4 4/6 4/8 5/4 5/4 5/6 5/6 5/8 5/8 L1 7.62 7.62 7.62 15.24 15.24 15.24 15.24 15.24 15.24 22.86 22.86 22.86 30.48 30.48 30.48 30.48 30.48 30.48 black 7.62 mm (inch) 0.300 0.300 0.300 0.600 0.600 0.600 0.600 0.600 0.600 0.900 0.900 0.900 1.200 1.200 1.200 1.200 1.200 1.200 L2 3.81 7.62 11.43 3.81 3.81 7.62 7.62 11.43 11.43 3.81 7.62 11.43 3.81 3.81 7.62 7.62 11.43 11.43 (inch) 0.150 0.300 0.450 0.150 0.150 0.300 0.300 0.450 0.450 0.150 0.300 0.450 0.150 0.150 0.300 0.300 0.450 0.450 Qty. 60 54 48 48 48 42 42 42 42 36 36 36 30 30 30 30 30 30 Order No. 1089340000 1089380000 1156130000 1156190000 1089610000 1156200000 1089670000 1156210000 1156220000 1090060000 1090140000 1156290000 1156370000 1090540000 1156390000 1090610000 1156410000 1156430000 F.101 BVF 7.62HP/../180 & BCF 3.81 Product data BVF 7.62HP/../180 BCF/..R IEC: 1000 V / 38 A / 0.5 - 10 mm² UL: 600 V / 35 A / AWG 24 - 10 For additional articles and information, refer to catalog.weidmueller.com 29,2 1.148" 15,5 0.61" 5,8 0.23" 6,8 0.268" Dimensioned drawing 1,2 0.048" L1 + 8,5 L1 + 0.347" L2 16 0.63" Hybrid female plug with power and signal contacts with PUSH IN connection system. Allows power, signals and shield to be plugged in simultaneously. It is perfect for connecting servo-drives and asynchronous drives. Meets the requirements of UL1059 for 600 V Use Group C. The mating profile ensures touch-safety of > 3 mm in accordance with IEC 61800-5-1. The pluggable shield connection establishes a large contact area on the device housing and does not need to be screwed on separately. Note: • Technical specifications refer to the power contacts • Technical specifications of signal contacts: 50V / 5A • Additional colours on request • Rated current related to rated cross-section and min. No. of poles. • Wire end ferrule without plastic collar to DIN 46228/1 • Wire end ferrule with plastic collar to DIN 46228/4 • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. 23,1 0.91" 20 0.787" OMNIMATE Power PCB Connectors Connectors in 7.62 mm pitch Series BV/SV 7.62 – connects up to 6 mm² P1 L1 L2 + 4,2 L2 + 0.166" F Technical data In compliance with IEC 60664-1 / IEC 61984 Clamping range, max. mm² 0.5...10 Solid core H05(07) V-U mm² 0.5...10 Stranded H07 V-R ...10 Flexible H05(07) V-K mm² 0.5... Flexible with ferrule mm² 1.5...4 Ferrule with plastic collar mm² 1.5...6 Stripping length mm 12 mm Screwdriver blade 0.8 x 4.5 According to norm DIN 5264-A Tightening torque range Nm Rated current, max. A 38 34 At ambient temperature 20°C 40°C For conductor cross-section mm² 6 Overvoltage category III III II Pollution severity 3 2 2 Rated voltage V 800 1000 1000 Rated impulse voltage kV 8 8 6 UL / CUL (Use Group) B C D Rated voltage V 600 600 600 Rated current A 35 35 5 AWG conductor 24-10 AWG CSA (Use Group) B C D Rated voltage V 600 600 600 Rated current A 35 35 5 AWG conductor AWG 24-10 General data Type of insulation material PA GF Flammability class UL 94 V-0 Contact base material Copper alloy Material of contact surface tinned Pin dimensions = d mm Solder eyelet Ø = D mm Solder eyelet Ø tolerance mm F.102 Accessories Ordering data Note: Refer to the Accessories chapter for additional accessories. Coding Order No. BV/SV 7.62HP KO 1937590000 Shielding BVF 7.62HP SH150 4-6 KIT 1118480000 BVF 7.62HP SH180 4-6 KIT 1118470000 BVF 7.62HP SH210 4-6 KIT 1118490000 SD 0,8x4,5x125 9009020000 PZ 6/5 9011460000 Screwdriver Solder pin length Colour Pitch Pol. 2/4 2/6 2/8 3/4 3/6 3/8 4/4 4/6 4/8 5/8 L1 7.62 7.62 7.62 15.24 15.24 15.24 22.86 22.86 22.86 30.48 black 7.62 mm (inch) 0.300 0.300 0.300 0.600 0.600 0.600 0.900 0.900 0.900 1.200 L2 3.81 7.62 11.43 3.81 7.62 11.43 3.81 7.62 11.43 11.43 (inch) 0.150 0.300 0.450 0.150 0.300 0.450 0.150 0.300 0.450 0.450 Crimping tool Representative derating curve Qty. 65 55 50 50 45 40 40 35 30 25 Order No. 1080550000 1080320000 1156440000 1080490000 1080570000 1156450000 1080510000 1080440000 1156470000 1156480000 BVF 7.62HP/../180MF & BCF 3.81 Product data OMNIMATE Power PCB Connectors Connectors in 7.62 mm pitch Series BV/SV 7.62 – connects up to 6 mm² BVF 7.62HP/../180MF. BCF/..R IEC: 1000 V / 38 A / 0.5 - 10 mm² UL: 600 V / 35 A / AWG 24 - 10 For additional articles and information, refer to catalog.weidmueller.com Dimensioned drawing 29,2 1.148" 15,5 0.61" L1 + 8,5 L1 + 0.347" L2 5,8 0.23" 6,8 0.268" 1,2 0.048" The pluggable shield connection establishes a large contact area on the device housing and does not need to be screwed on separately. 16 0.63" 23,1 0.91" 20 0.787" Hybrid female plug with power and signal contacts with PUSH IN connection system. Allows power, signals and shield to be plugged in simultaneously. It is perfect for connecting servo-drives and asynchronous drives. Meets the requirements of UL1059 for 600 V Use Group C. The mating profile ensures touchsafety of > 3 mm in accordance with IEC 61800-5-1. The self-fastening middle flange reduces the space requirements by one pole. Note: • Technical specifications refer to the power contacts • Technical specifications of signal contacts: 50V / 5A • Additional colours on request • Rated current related to rated cross-section and min. No. of poles. • Wire end ferrule without plastic collar to DIN 46228/1 • Wire end ferrule with plastic collar to DIN 46228/4 • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. P1 L1 L2 + 4,2 L2 + 0.166" Technical data In compliance with IEC 60664-1 / IEC 61984 Clamping range, max. mm² 0.5...10 Solid core H05(07) V-U mm² 0.5...10 Stranded H07 V-R ...10 Flexible H05(07) V-K mm² 0.5... Flexible with ferrule mm² 1.5...4 Ferrule with plastic collar mm² 1.5...6 Stripping length mm 12 mm Screwdriver blade 0.8 x 4.5 According to norm DIN 5264-A Tightening torque range Nm Rated current, max. A 38 34 At ambient temperature 20°C 40°C For conductor cross-section mm² 6 Overvoltage category III III II Pollution severity 3 2 2 Rated voltage V 800 1000 1000 Rated impulse voltage kV 8 8 6 UL / CUL (Use Group) B C D Rated voltage V 600 600 600 Rated current A 35 35 5 AWG conductor 24-10 AWG CSA (Use Group) B C D Rated voltage V 600 600 600 Rated current A 35 35 5 AWG conductor AWG 24-10 General data Type of insulation material PA GF Flammability class UL 94 V-0 Contact base material Copper alloy Material of contact surface tinned Pin dimensions = d mm Solder eyelet Ø = D mm Solder eyelet Ø tolerance mm Accessories F Ordering data Note: Refer to the Accessories chapter for additional accessories. Coding Order No. BV/SV 7.62HP KO 1937590000 Shielding BVF 7.62HP SH150 4-6 KIT 1118480000 BVF 7.62HP SH180 4-6 KIT 1118470000 BVF 7.62HP SH210 4-6 KIT 1118490000 SD 0,8x4,5x125 9009020000 PZ 6/5 9011460000 Screwdriver Crimping tool Solder pin length Colour Pitch Pol. 2/4 2/6 2/8 3/4 3/4 3/6 3/6 3/8 3/8 4/4 4/6 4/8 5/4 5/4 5/6 5/6 5/8 5/8 L1 7.62 7.62 7.62 15.24 15.24 15.24 15.24 15.24 15.24 22.86 22.86 22.86 30.48 30.48 30.48 30.48 30.48 30.48 black 7.62 mm (inch) 0.300 0.300 0.300 0.600 0.600 0.600 0.600 0.600 0.600 0.900 0.900 0.900 1.200 1.200 1.200 1.200 1.200 1.200 L2 3.81 7.62 11.43 3.81 3.81 7.62 7.62 11.43 11.43 3.81 7.62 11.43 3.81 3.81 7.62 7.62 11.43 11.43 (inch) 0.150 0.300 0.450 0.150 0.150 0.300 0.300 0.450 0.450 0.150 0.300 0.450 0.150 0.150 0.300 0.300 0.450 0.450 Qty. 50 45 40 40 40 35 35 30 30 30 30 25 25 25 25 25 25 25 Order No. 1081610000 1081030000 1157090000 1157110000 1081630000 1157120000 1081720000 1157130000 1157170000 1081150000 1082020000 1157200000 1157220000 1082140000 1157230000 1081760000 1157240000 1157250000 Representative derating curve F.103 BVF 7.62HP/../180MSF & BCF 3.81 Product data BVF 7.62HP/../180MSF. BCF/..R IEC: 1000 V / 38 A / 0.5 - 10 mm² UL: 600 V / 35 A / AWG 24 - 10 For additional articles and information, refer to catalog.weidmueller.com Dimensioned drawing 29,2 1.148" 15,5 0.61" L1 + 8,5 L1 + 0.347" P1 In compliance with IEC 60664-1 / IEC 61984 Clamping range, max. mm² 0.5...10 Solid core H05(07) V-U mm² 0.5...10 Stranded H07 V-R ...10 Flexible H05(07) V-K mm² 0.5... Flexible with ferrule mm² 1.5...4 Ferrule with plastic collar mm² 1.5...6 Stripping length mm 12 mm Screwdriver blade 0.8 x 4.5 According to norm DIN 5264-A Tightening torque range Nm Rated current, max. A 38 34 At ambient temperature 20°C 40°C For conductor cross-section mm² 6 Overvoltage category III III II Pollution severity 3 2 2 Rated voltage V 800 1000 1000 Rated impulse voltage kV 8 8 6 UL / CUL (Use Group) B C D Rated voltage V 600 600 600 Rated current A 35 35 5 AWG conductor 24-10 AWG CSA (Use Group) B C D Rated voltage V 600 600 600 Rated current A 35 35 5 AWG conductor AWG 24-10 General data Type of insulation material PA GF Flammability class UL 94 V-0 Contact base material Copper alloy Material of contact surface tinned Pin dimensions = d mm Solder eyelet Ø = D mm Solder eyelet Ø tolerance mm F.104 L1 L2 + 4,2 L2 + 0.166" F Technical data L2 16 0.63" 1,2 0.048" The pluggable shield connection establishes a large contact area on the device housing and does not need to be screwed on separately. 5,8 0.23" 6,8 0.268" Hybrid female plug with power and signal contacts with PUSH IN connection system. Allows power, signals and shield to be plugged in simultaneously. It is perfect for connecting servo-drives and asynchronous drives. Meets the requirements of UL1059 for 600 V Use Group C. The mating profile ensures touchsafety of > 3 mm in accordance with IEC 61800-5-1. The self-fastening middle flange reduces the space requirements by one pole. Note: • Technical specifications refer to the power contacts • Technical specifications of signal contacts: 50V / 5A • Additional colours on request • Rated current related to rated cross-section and min. No. of poles. • Wire end ferrule without plastic collar to DIN 46228/1 • Wire end ferrule with plastic collar to DIN 46228/4 • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. 23,1 0.91" 20 0.787" OMNIMATE Power PCB Connectors Connectors in 7.62 mm pitch Series BV/SV 7.62 – connects up to 6 mm² Accessories Ordering data Note: Refer to the Accessories chapter for additional accessories. Coding Order No. BV/SV 7.62HP KO 1937590000 Shielding BVF 7.62HP SH150 4-6 KIT 1118480000 BVF 7.62HP SH180 4-6 KIT 1118470000 BVF 7.62HP SH210 4-6 KIT 1118490000 SD 0,8x4,5x125 9009020000 PZ 6/5 9011460000 Screwdriver Crimping tool Solder pin length Colour Pitch Pol. 2/4 2/6 2/8 3/4 3/4 3/6 3/6 3/8 3/8 4/4 4/6 4/8 5/4 5/6 5/8 5/8 L1 7.62 7.62 7.62 15.24 15.24 15.24 15.24 15.24 15.24 22.86 22.86 22.86 30.48 30.48 30.48 30.48 black 7.62 mm (inch) 0.300 0.300 0.300 0.600 0.600 0.600 0.600 0.600 0.600 0.900 0.900 0.900 1.200 1.200 1.200 1.200 L2 3.81 7.62 11.43 3.81 3.81 7.62 7.62 11.43 11.43 3.81 7.62 11.43 3.81 7.62 11.43 11.43 (inch) 0.150 0.300 0.450 0.150 0.150 0.300 0.300 0.450 0.450 0.150 0.300 0.450 0.150 0.300 0.450 0.450 Representative derating curve Qty. 50 45 40 40 40 35 35 30 30 30 30 25 25 25 25 25 Order No. 1081930000 1082080000 1157100000 1157440000 1082110000 1157450000 1081730000 1157470000 1157190000 1081660000 1081750000 1157210000 1157270000 1157280000 1157300000 1157290000