1122761001

    Data sheet... RS-SERIES RS 32 115-230VUC LD 2U Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com     Clip-on RS 30. 31. 32 relay bases are available in widths from 11.2 to 25 mm, depending on the type. The RSM relay multiplexers are available as 4, 8 and 16-way modules. To reduce the wiring work, the DC variants are fitted with a common plus or minus potential. The optional IEC603-1 plug-in connector enables the connection of pre-assembled lines. The screw connection system is used to connect the conductor with a rated cross-section of 2.5 mm². General ordering data   Order No. Type Version GTIN (EAN) Qty.   1122761001 RS 32 115-230VUC LD 2U RS-SERIES, Relays, No. of contacts: 2, CO contact, AgNi 90/10, Rated control voltage: 115 V UC +5 % / -15 %, 230 V UC +5 % / -15 %, Continuous current: 4 A, Screw connection 4032248046232 10 pc(s). Creation date March 7, 2013 6:15:54 PM CET   Catalogue status 20.12.2012 / We reserve the right to make technical changes. 1     Data sheet... RS-SERIES RS 32 115-230VUC LD 2U   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Ratings   Conductor connection system     Humidity 40 °C / 93 % rel. humidity, no condensation 25 mm 63.5 mm     Height Net weight 70 mm 46.88 g -25 °C...+40 °C   Storage temperature -40 °C...+60 °C     Clamping range, rated connection, min. 0.5 mm² Stripping length, rated connection 8 mm   Rated current AC     Power rating Pull-in / drop-out current, AC coil   Status indicator         Continuous current Max. switching power Switch-off delay Min. switching power         Contact design Mechanical service life       Clearance and creepage distances for control side - load side Protection degree Surge voltage category       Status indicator Bridge rectifier   Screw connection Dimensions and weights   Width Depth   Temperatures   Operating temperature   Connection data   Clamping range, rated connection 2.5 mm² Clamping range, rated connection, max. 4 mm²   Input   Rated control voltage 115 V UC +5 % / -15 %, 230 V UC +5 % / -15 % 5.4 mA / 5 mA Rated current DC Pull-in (sparkover) / drop-out voltage DC coil 98 V / 195 V Pull-in / drop-out current, DC coil 1 mA / 1.2 mA   5.6 mA / 5.3 mA 1 W / 1 VA 1.5 mA / 2 mA red LED Output   Max. switching voltage, AC making current Switch-on delay Duration of Bounce 250 V 6A < 13 ms ≤ 4 ms Max. switching frequency at rated load 0.1 Hz   4A 2000 VA = 10 ms 100 mA / 5 V, 10 V / 10 mA, 24 V / 1 mA Contact specifications   No. of contacts Contact material   2 AgNi 90/10 CO contact 30 x 106 switching cycles Insulation coordination   Rated voltage Impulse withstand voltage Pollution severity   250 V 4 kV 2 > 3 mm IP 20 III Other technical data   Version Free-wheel diode Reverse polarity protection   Relay coupler No Available red LED Yes Creation date March 7, 2013 6:15:54 PM CET   Catalogue status 20.12.2012 / We reserve the right to make technical changes. 2     Data sheet... RS-SERIES RS 32 115-230VUC LD 2U   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Further details of approvals / standards   Standards   DIN EN 50178     EC001437 30-21-19-17 27-37-16-01 27-37-16-01         ETIM 3.0 eClass 4.1 eClass 6.0   Classifications   ETIM 2.0 UNSPSC eClass 5.1 eClass 7.0   EC001437 40-02-06-14 27-37-16-01 Approvals   Approvals   Downloads   Declaration of Conformity   K033_10_10.pdf Creation date March 7, 2013 6:15:54 PM CET   Catalogue status 20.12.2012 / We reserve the right to make technical changes. 3     Data sheet... RS-SERIES RS 32 115-230VUC LD 2U   Drawings Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Electric symbol Creation date March 7, 2013 6:15:54 PM CET   Catalogue status 20.12.2012 / We reserve the right to make technical changes. 4