1146490000

    Data sheet OMNIMATE Signal - series BL/SL 5.08 SL 5.08HC/08/180 3.2SN OR BX Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com     Pin headers in glass-fibre-reinforced plastic with straight wire outlet; optimised for wave soldering. The flange variant (F) can be screwed onto the respective counter piece or the circuit board. There is no need for an extra screw to connect the circuit board when the solder flange (LF) version is used. This also protects the solder points from mechanical strain. All pin headers can be manually coded or ordered pre-coded. HC = High Current. General ordering data   Type Order No. Version GTIN (EAN) Qty. Product data Packaging   SL 5.08HC/08/180 3.2SN OR BX 1146490000 PCB plug-in connector, male header, open side, Solder connection, 5.08 mm, No. of poles: 8, 180°, Solder pin length (l): 3.2 mm, tinned, Orange, Box 4032248108855 50 pc(s). IEC: 400 V / 24 A UL: 300 V / 18.5 A Box Creation date January 27, 2015 9:42:04 AM CET   Catalogue status xx.xx.xxxx / We reserve the right to make technical changes. 1     Data sheet OMNIMATE Signal - series BL/SL 5.08 SL 5.08HC/08/180 3.2SN OR BX   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions and weights   Net weight   3.16 g       Mounting onto the PCB               Pitch in mm (P) No. of poles Solder pin length tolerance Can be coded Solder eyelet hole diameter (D) L1 in mm Insulation resistance             Colour UL 94 flammability rating Contact material Operating temperature, min. Temperature range, installation, min. Max. relative humidity during storage   Rated current, max. no. of poles (Tu=20°C) Rated current, number of poles (Tu=40°C), max. Rated impulse voltage for surge voltage class/ contamination degree III/3 Rated impulse voltage for surge voltage class/ pollution degree III/2 Rated impulse voltage for surge voltage class/ pollution degree II/2 System parameters   Product family OMNIMATE Signal - series BL/SL 5.08 Outgoing elbow 180° Pitch in inches (P) 0.2 inch Solder pin length (l) 3.2 mm Solder pin dimensions d = 1.2 mm, Octagonal Number of solder pins per pole 1 Solder eyelet hole diameter tolerance (D)+ 0,1 mm L1 in inches 1.4 inch   Solder connection 5.08 mm 8 0 / -0.3 mm Yes 1.3 mm 35.56 mm ≥ 108 Ω Material data   Insulating material Insulating material group CTI Contact surface Operating temperature, max. Temperature range, installation, max.   PA GF II ≥ 550 tinned 100 °C 100 °C Orange V-0 Cu-Leg -50 °C -25 °C 80 % Rating data acc. to IEC 60664-1 / IEC 61984   Rated current, min. no. of poles (TU=20°C) Rated current, number of poles (Tu=40°C), min Rated voltage for surge voltage class / pollution degree III/3 Rated voltage for surge voltage class / pollution degree III/2 Rated voltage for surge voltage class / pollution degree II/2   24 A 21 A 250 V 320 V 400 V         19 A 16.5 A 4 kV 4 kV 4 kV CSA rating data   Rated voltage (Use group B) Rated voltage (use group D)       Rated current (use group B) Rated current (use group D)   Certificate No. (cURus) 300 V 300 V     Rated current (use group B) Rated current (use group D) EC002637 EC002637 27-44-04-02       ETIM 5.0 eClass 6.2   300 V 300 V 18.5 A 18.5 A UL 1059 rating data   Institute (cURus) Rated voltage (use group B) Rated voltage (use group D)   E60693 18.5 A 10 A Classifications   ETIM 4.0 ETIM 6.0 eClass 7.1   EC002637 27-26-07-04 Creation date January 27, 2015 9:42:04 AM CET   Catalogue status xx.xx.xxxx / We reserve the right to make technical changes. 2     Data sheet OMNIMATE Signal - series BL/SL 5.08 SL 5.08HC/08/180 3.2SN OR BX   Technical data Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Notes   Notes • Additional colours on request • Gold-plated contact surfaces on request • Rated current related to rated cross-section & min. No. of poles. • P on drawing = pitch IPC conformity   • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. The products are developed, manufactured and delivered according to the internationally recognised IPC-A-610 standard, category "permissible". More extensive demands on the products can be evaluated on request. Approvals   Approvals ROHS   Conform Creation date January 27, 2015 9:42:04 AM CET   Catalogue status xx.xx.xxxx / We reserve the right to make technical changes. 3     Data sheet OMNIMATE Signal - series BL/SL 5.08 SL 5.08HC/08/180 3.2SN OR BX   Drawings Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Creation date January 27, 2015 9:42:04 AM CET   Catalogue status xx.xx.xxxx / We reserve the right to make technical changes. 4