1181521001

Datasheet RS-SERIES RS 30 24VDC LD LP 1U Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-2083 www.weidmueller.com Clip-on RS 30. 31. 32 relay bases are available in widths from 11.2 to 25 mm, depending on the type. The RSM relay multiplexers are available as 4, 8 and 16-way modules. To reduce the wiring work, the DC variants are fitted with a common plus or minus potential. The optional IEC603-1 plug-in connector enables the connection of pre-assembled lines. The screw connection system is used to connect the conductor with a rated cross-section of 2.5 mm². General ordering data Order No. Part designation Version GTIN (EAN) Qty. 1181521001 RS 30 24VDC LD LP 1U RS-SERIES, Relays, No. of contacts: 1, CO contact, Rated control voltage: 24 V DC ±10 %, Screw connection 4032248046119 10 pc(s). Creation date November 4, 2010 10:17:48 PM CET Last update 27.09.2010 / We reserve the right to make technical changes. 1 Datasheet RS-SERIES RS 30 24VDC LD LP 1U Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-2083 www.weidmueller.com Technical data Dimensions Length Height 70 mm 56 mm Width 16 mm -25 °C...+40 °C Storage temperature -40 °C...+60 °C Rated control voltage Rated current DC Power rating 24 V DC ±10 % 8A 0.45 W 6A 8A 10 mA ≤ 8 ms 8A Duration of Bounce Max. switching frequency at rated load Switch-off delay Switching voltage AC, max. min. switching capacity ≤ 3 ms 70 Hz ≤ 7 ms 250 V 250 mW Contact design Contact material CO contact No. of contacts Mechanical service life 1 Electrical service life, DC coil > 5x10 switching cycles Electrical service life of AC coil > 7x10 switching cycles Screw connection 40°C / 93% rel. humidity, no condensation DIN Rail compatibility TS 32 TS 35 Temperature Ambient temperature (operational) Input Rated voltage 250 V Pull-in (sparkover) / drop-out voltage DC coil 21.5V Pull-in / drop-out current, DC coil 12mA/3mA Output Continuous current Max. switching current Min. switching current Switch-on delay making current Contact data AgNi 0.15 gold flashed 5 6 20 x 10 switching cycles 5 Rated data Conductor connection system Humidity Insulation coordination (EN 50 178) Clearance and creepage distances for control/load side Overvoltage category Protection class > 3 mm III IP 20 Impulse withstand voltage Pollution severity Rated voltage 4 kV 2 250 V Reverse polarity protection Available ETIM 3.0 eClass 6.0 EC001437 27-37-16-01 Other technical data Free-wheel diode Version Yes Relay coupler Approvals Approvals institutes GOSTME25; CE Classifications ETIM 2.0 eClass 5.1 EC001437 27-37-16-01 Creation date November 4, 2010 10:17:48 PM CET Last update 27.09.2010 / We reserve the right to make technical changes. 2