1194650000

    Data sheet... MH KTB MH 262620 S4E0 Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com     Stainless steel housings for the use within explosive-risk zones The Klippon® TB housing series features excellent performance characteristics, even under the most difficult environmental surroundings. And it meets the stricter requirements of explosive-risk zones found in the process or power generation industries The new Klippon® TB MH housing series offers further improvements to a product line that is already successfully leading the market. The Klippon® TB MH housing series features the following advantages: • Available in 12 sizes and 3 standard depths • Equipped with up to 4 flange plates • The seal is protected against compression • Completely removable padlock mechanism • Cover lock outside the sealed zone • Improved temperature performance • IP66/IP67 protection • Completely removable cover – no tools required • Earth stud in housing cover and bottom section • Welded-on mounting feet • International approvals General ordering data   Order No. Type Version GTIN (EAN) Qty.   1194650000 KTB MH 262620 S4E0 Enclosures, stainless steel enclosure, Stainless steel 1.4404 (316L), 260 mm, 200 mm, 260 mm 4032248977406 1 pc(s). Creation date April 25, 2013 9:49:41 PM CEST   Catalogue status 12.03.2013 / We reserve the right to make technical changes. 1     Data sheet... MH KTB MH 262620 S4E0   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions and weights   Length Height Mounting dimension - width Net weight   200 mm 260 mm 286 mm 4,400 g         Width Depth Mounting dimension - height   260 mm 200 mm 170 mm 25 11 4 2 1           M16 (3) M25 (3) M40 (3) M63 (3)   16 9 4 1 25 11 4 2 1           M16 (2) M25 (2) M40 (2) M63 (2)   16 9 4 1 33 14 6 2 1           M16 M25 M40 M63   22 12 5 2 10 mm     Access opening: height Areas of use   Material thickness 207 mm Explosive risk zone, Process industry, Oil and gas industry, Chemical industry, Offshore, Onshore         Material thickness of flange Opening angle lid Position PE bolts Seal material     Operating temperature, min. Impact resistance   Note: protection class Cable glands, left   M12 (3) M20 (3) M32 (3) M50 (3) M75 (3)   Cable glands, right   M12 (2) M20 (2) M32 (2) M50 (2) M75 (2)   Cable glands, top/bottom   M12 M20 M32 M50 M75   General information   AF size 1 Access opening: width Installation advice Material thickness of cover Max. payload Overall dimensions Material Surface finish Operating temperature, max. Protection degree Enclosure attachment Integral fixing   201 mm Terminal rail / mounting plate 1.5 mm 27 kg 260 x 311 x 215 Stainless steel 1.4404 (316L) electropolished 135 °C IP 66, IP 67   4 welded-on mounting feet with 11-mm holes (2 slotted feet and 2 crossshaped feet)   4, 6 or 9 stud bolts M6 inner (female) thread Cover attachment   1.5 mm 3 mm 125 ° Page C Silicone -60 °C 7 J ATEX version, 10 J version standard For use in the temperature range over 105°C, the IP protection is limited to IP 66. 4 hinges and M6 hex-head slotted screws SW10 Creation date April 25, 2013 9:49:41 PM CEST   Catalogue status 12.03.2013 / We reserve the right to make technical changes. 2     Data sheet... MH KTB MH 262620 S4E0   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Housing earth   Earth, housing, internal   Welded-on M6 stainlesssteel earth stud in lower part of housing and lid.     1x17 2x34 1x22       WDU 16 / ZDU 16 WDU 4 / ZDU 4   1x14 1x29 1x18 2x35 1x22       WDU 16 / ZDU 16 (2) WDU 4 / ZDU 4 (2)   1x15 1x30 27-14-91-07   eClass 7.1 27-14-91-07 KEMA10ATEX0050 IECEXKEM10.0015U E243298VOL1SEC4       Certificate No. (GERMLLOYD) Certificate No. (MARITREG)   11533-10 10.04093.250 horizontal assembly   WDU 10 / ZDU 10 WDU 2,5 / ZDU 2,5 / IDU 2,5 WDU 6 / ZDU 6   vertical assembly   WDU 10 / ZDU 10 (2) WDU 2,5 / ZDU 2,5 / IDU 2,5 (2) WDU 6 / ZDU 6 (2)   Classifications   eClass 6.2   Test certificates   Certificate No. (ATEX) Certificate No. (IECEX) Certificate no. (cULus)   Approvals   Approvals   Creation date April 25, 2013 9:49:41 PM CEST   Catalogue status 12.03.2013 / We reserve the right to make technical changes. 3     Data sheet... MH KTB MH 262620 S4E0   Drawings Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Creation date April 25, 2013 9:49:41 PM CEST   Catalogue status 12.03.2013 / We reserve the right to make technical changes. 4