1250410000

    Data sheet LSF-SMD 3.50/09/180 SN BK RL Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany   www.weidmueller.com     Product image Similar to illustration The innovative quick connector - simple, safe and economical: PCB terminals with spring connection and direct PUSH IN technology. A milestone in connection technology. Amazingly simple and simply amazing in practice: • Connect and easily detach solid wires or wires with wire-end ferrules without using tools • Processed automatically in the reflow or vapour phase • Potentials and clamping points marked clearly by coloured push buttons General ordering data   Version Order No. Type GTIN (EAN) Qty. Product data Packaging   Printed circuit board terminals, 3.50 mm, Number of poles: 9, 180°, black, PUSH IN with actuator, Clamping range, max. : 1.5 mm², Tape 1250440000 LSF-SMD 3.50/09/180 SN BK RL 4050118041149 180 pc(s). IEC: 320 V / 17.5 A / 0.2 - 1.5 mm² UL: 300 V / 12 A / AWG 24 - AWG 14 Tape World-class design-in and processing phases, and suitable for a vast range of applications. PCB terminal for fully automatic assembly using reflow soldering (SMD), with PUSH IN wire connections. Conductor insertion and slider operation from the same direction (TOP). • Solid & flexible conductors with wire-end ferrules need only to be inserted and they are ready. • When connecting stranded wires without wireend ferrules the actuating element is used to open the terminal point • Intuitive handling – since the wire-entry area and handling area are clearly separated. • Packaged in tape-on-reel • Conductor outlet direction 180° Creation date October 8, 2022 1:34:02 AM CEST   Catalogue status 23.09.2022 / We reserve the right to make technical changes. 1     Data sheet LSF-SMD 3.50/09/180 SN BK RL   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany   www.weidmueller.com Technical data Dimensions and weights   Depth Height Height of lowest version Width (inches)   10.5 mm 16.3 mm 16.3 mm 1.268 inch         Depth (inches) Height (inches) Width Net weight 120 °C     OMNIMATE Signal - series LSF SMD solder connection 3.5 mm 9 No 2 28 mm   Wire connection method                 Conductor outlet direction Pitch in inches (P) Pin series quantity Coplanarity: Stripping length L1 in inches Touch-safe protection acc. to DIN VDE 57 106 Volume resistance                 Colour Insulating material group Moisture Level (MSL) Contact material Storage temperature, min. Operating temperature, min. Temperature range, installation, min.   0.413 inch 0.642 inch 32.2 mm 6.96 g Temperatures   Continuous operating temp., max.   System parameters   Product family Mounting onto the PCB Pitch in mm (P) Number of poles Fitted by customer Number of solder pins per pole L1 in mm Touch-safe protection acc. to DIN VDE 0470 Protection degree   IP 20 IP20 PUSH IN with actuator 180° 0.138 inch 1 100 μm 8 mm 1.104 inch Safe from finger touch 1.60 mΩ Material data   Insulating material Colour chart (similar) Comparative Tracking Index (CTI) UL 94 flammability rating Layer structure of solder connection Storage temperature, max. Operating temperature, max. Temperature range, installation, max.   LCP GF RAL 9011 ≥ 175 V-0 4...6 µm Sn matt 70 °C 120 °C 120 °C black IIIa 1 Copper alloy -40 °C -50 °C -30 °C Conductors suitable for connection   Clamping range, min. 0.13 mm² Clamping range, max. 1.5 mm² Wire connection cross section AWG, AWG 28 min. Wire connection cross section AWG, AWG 14 max. Solid, min. H05(07) V-U 0.2 mm² Solid, max. H05(07) V-U 1.5 mm² Flexible, min. H05(07) V-K 0.2 mm² Flexible, max. H05(07) V-K 1.5 mm² w. plastic collar ferrule, DIN 46228 pt 4, 0.25 mm² min. w. plastic collar ferrule, DIN 46228 pt 4, 0.75 mm² max. w. wire end ferrule, DIN 46228 pt 1, 0.25 mm² min. w. wire end ferrule, DIN 46228 pt 1, 1.5 mm² max. Creation date October 8, 2022 1:34:02 AM CEST   Catalogue status 23.09.2022 / We reserve the right to make technical changes. 2     Data sheet LSF-SMD 3.50/09/180 SN BK RL   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany   www.weidmueller.com Technical data Clampable conductor Reference text   Cross-section for conductor connection Type fine-wired nominal 0.25 mm² Stripping length nominal 10 mm wire end ferrule Recommended wire- H0,25/12 HBL end ferrule Type fine-wired Cross-section for conductor connection nominal 0.34 mm² Stripping length nominal 10 mm wire end ferrule Recommended wire- H0,34/12 TK end ferrule Type fine-wired Cross-section for conductor connection nominal 0.5 mm² Stripping length nominal 10 mm wire end ferrule Recommended wire- H0,5/14 OR end ferrule Type fine-wired Cross-section for conductor connection nominal 0.75 mm² Stripping length nominal 10 mm wire end ferrule Recommended wire- H0,75/14T HBL end ferrule Length of ferrules is to be chosen depending on the product and the rated voltage., The outside diameter of the plastic collar should not be larger than the pitch (P) Rated data acc. to IEC   tested acc. to standard Rated current, max. number of poles (Tu=20°C) Rated current, max. number of poles (Tu=40°C) Rated voltage for surge voltage class / pollution degree III/2 Rated impulse voltage for surge voltage class/ pollution degree II/2 Rated impulse voltage for surge voltage class/ contamination degree III/3   IEC 60664-1, IEC 61984 16 A 14 A 160 V 2.5 kV 2.5 kV     Rated current, min. number of poles (Tu=20°C) Rated current, min. number of poles (Tu=40°C) Rated voltage for surge voltage class / pollution degree II/2 Rated voltage for surge voltage class / pollution degree III/3 Rated impulse voltage for surge voltage class/ pollution degree III/2 Short-time withstand current resistance   Certificate No. (CSA)         Rated voltage (Use group D / CSA) Rated current (Use group D / CSA) Wire cross-section, AWG, max.           17.5 A 17.5 A 320 V 160 V 2.5 kV 3 x 1s with 80 A Rated data acc. to CSA   Institute (CSA) Rated voltage (Use group B / CSA) Rated current (Use group B / CSA) Wire cross-section, AWG, min. Reference to approval values   300 V 10 A AWG 28 Specifications are maximum values, details see approval certificate. 200039-1664286 300 V 10 A AWG 14 Creation date October 8, 2022 1:34:02 AM CEST   Catalogue status 23.09.2022 / We reserve the right to make technical changes. 3     Data sheet LSF-SMD 3.50/09/180 SN BK RL   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany   www.weidmueller.com Technical data Rated data acc. to UL 1059   Institute (cURus) Rated voltage (Use group B / UL 1059) Rated current (Use group B / UL 1059) Wire cross-section, AWG, min. Reference to approval values     Certificate No. (cURus) 300 V 12 A AWG 24 Specifications are maximum values, details see approval certificate.         E60693 Rated voltage (Use group D / UL 1059) 300 V Rated current (Use group D / UL 1059) 10 A Wire cross-section, AWG, max. AWG 14   Tape 330 mm 17.6 mm 17.1 mm 43.7 mm 1.75 mm               VPE length VPE height Tape width (W) Tape pocket height (A0) Tape pocket separation (P1) Tape pocket separation (F) Surface resistance 330 mm 61 mm 56 mm 11.2 mm 20 mm 26.2 mm ETIM 7.0 ECLASS 9.0 ECLASS 10.0 ECLASS 12.0 EC002643 27-44-04-01 27-44-04-01 27-46-01-01 Packing   Packaging VPE width Tape depth (T2) Tape pocket depth (K0) Tape pocket width (B0) Tape hole separation (E) Tape reel diameter ∅ (A) Width Pick & Place Pad (WPPP) Diameter of the withdrawal surface (ø Dmax)   330 mm 7.5 mm 9 mm     Length Pick & Place Pad (LPPP)   Rs = 109 - 1012 Ω 8.5 mm Classifications   ETIM 6.0 ETIM 8.0 ECLASS 9.1 ECLASS 11.0   EC002643 EC002643 27-44-04-01 27-46-01-01         Important note   IPC conformity Notes Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request. • Additional push button colours on request • Operating force of slider max. 40 N • Rated current related to rated cross-section & min. No. of poles. • Wire end ferrule with plastic collar to DIN 46228/4 • Wire end ferrule without plastic collar to DIN 46228/1 • P on drawing = pitch • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. • Crimping shape "A" for wire end ferrules with PZ 6/5 crimping tool recommended.   • Long term storage of the product with average temperature of 50 °C and average humidity 70%, 36 months Creation date October 8, 2022 1:34:02 AM CEST   Catalogue status 23.09.2022 / We reserve the right to make technical changes. 4     Data sheet LSF-SMD 3.50/09/180 SN BK RL   Technical data Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany   www.weidmueller.com Approvals   Approvals ROHS UL File Number Search Certificate No. (cURus)   Conform UL Website E60693 Downloads   Approval/Certificate/Document of Conformity Engineering Data Engineering Data Catalogues Brochures Declaration of the Manufacturer CAD data -- STEP EPLAN, WSCAD Catalogues in PDF-format FL DRIVES EN PI OMNIMATE LSF SMD EN FL ANALO.SIGN.CONV. EN MB DEVICE MANUF. EN FL DRIVES DE FL BUILDING SAFETY EN FL APPL LED LIGHTING EN FL INDUSTR.CONTROLS EN FL MACHINE SAFETY EN FL HEATING ELECTR EN FL APPL_INVERTER EN FL_BASE_STATION_EN FL ELEVATOR EN FL POWER SUPPLY EN FL 72H SAMPLE SER EN PO OMNIMATE EN PO OMNIMATE EN White paper surface mount technology Download Whitepaper   Creation date October 8, 2022 1:34:02 AM CEST   Catalogue status 23.09.2022 / We reserve the right to make technical changes. 5     Data sheet LSF-SMD 3.50/09/180 SN BK RL   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany   www.weidmueller.com Drawings Dimensional drawing Graph Graph Product benefits Product benefits Stable solder connection PUSH IN wire connection Creation date October 8, 2022 1:34:02 AM CEST   Catalogue status 23.09.2022 / We reserve the right to make technical changes. 6     Data sheet LSF-SMD 3.50/09/180 SN BK RL   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany   www.weidmueller.com Drawings Product benefits Dimensional drawing Packaged in tape-on-reel Dimensional drawing Creation date October 8, 2022 1:34:02 AM CEST   Catalogue status 23.09.2022 / We reserve the right to make technical changes. 7 Reflow Solder Profile   Recommended reflow soldering profile Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com     300 254 °C Temperature [°C] 250 217 200 235 °C Melting point lead-free solder paste 245 °C 190 °C approx. 60 s > 217 °C 180 °C 150 preheating Cooling rate: < 6 °K/s 100 Heating rate: < 3 °K/s 50 Continuous line: Typical process Dotted line: Process limits 0 0 50 100 150 200 250 300 350 Time [sec] Reflow soldering profile The perfect soldering profile for SMT Surface Mount Technology is one the most exiting question in SMT production. But there are more than one correct answer: The diagram of temperature-on-time is related to processing features of solder paste and to maximum load of components. We have to consider the following parameters: • Time for pre heating • Maximum temperature • Time above melting point • Time for cooling • Maximum heating rate • Maximum cooling rate We recommend a typical solder profile with associated process limits. With preheating components and board are prepared smoothly for the solder phase. Heating rate is typically ≤ +3K/s. In parallel the solder paste is ‚activated’. The time above melting point of 217°C the paste gets liquid and components and boards begin to connect. The maximum temperature of 245°C to 254°C should stay between 10 and 40 seconds. In the cooling phase at ≥ -6K/s solder is cured. Board and components cool down while avoiding cold cracks.   We reserve the right to make technical changes.