1285660000

    Data sheet... SAK Series DK 4Q/35/TC TYP T Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com     Weidmüller thermocouple terminals of the SAK Series are specially designed to transmit the smallest voltages in temperature measuring circuits. Special current bars ensure that no erroneous signals can be generated in the terminal in the case of temperature differences between the plus and minus paths. Such highly precise measurements are required in aircraft engine test rigs, complicated chemical processes, controls, etc. • The material of the current bar is identical to that of the thermocouple and equalising lines. • Clear labelling of the thermocouple • 2-pole blocks per thermocouple • 10 mm mounting width General ordering data   Order No. Type GTIN (EAN) Qty.   1285660000 DK 4Q/35/TC TYP T 4008190086060 100 pc(s). Creation date May 3, 2013 11:33:22 PM CEST   Catalogue status 12.03.2013 / We reserve the right to make technical changes. 1     Data sheet... SAK Series DK 4Q/35/TC TYP T   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions and weights   Length Height Net weight   54 mm 59.5 mm 13.62 g       Width Height of lowest version   -50 °C     Storage temperature Continuous operating temp., max. 100 °C No 1 Snap-on       Installation advice Open sides Version Direct mounting right Thermocouple   Conductor cross-section, flexible plus plastic collar DIN 46228/1, further connection, max. 2.5 mm² 6 mm 59.5 mm Temperatures   Operating temperature Continuous operating temp., min.   Additional technical data   Explosion-tested version Number of similar terminals Type of mounting   Clampable wires (additional connection)   Conductor cross-section, flexible plus plastic collar DIN 46228/1, further connection, min.   0.5 mm² Clampable wires (rated connection)   Type of connection Blade size Number of connections Clamping screw Tightening torque, max. Gauge to IEC 60947-1 Screw connection 0.6 x 3.5 mm 4 M3             Stripping length 9 mm Connection direction on side Clamping range, rated connection, max. 4 mm² Tightening torque, min. 0.5 Nm Torque level with DMS electric screwdriver 2 Wire connection cross section, solid core, max. rated connection 0.5 mm² Wire connection cross section, stranded, rated connection, min. 1.5 mm² Wire connection cross section, finely stranded, max. 4 mm² Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, rated connection, min. 0.5 mm² Cross-section for connected conductor, finely stranded with wire-end ferrules and plastic collars DIN 46228/4, rated connection, min. 0.5 mm²   4 mm²   Standards IEC 60584, IEC 60947-7-1 PA 66 V-2     Colour   Beige 1 Nm A3 Wire connection cross section, solid core max. rated connection 4 mm² Wire connection cross section, stranded, rated connection, max. 4 mm² Wire connection cross-section, finely stranded, min. 0.5 mm² Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, rated connection, max. 2.5 mm² Wire connection cross-section, finely stranded with wire-end ferrules and plastic collars DIN 46228/4, rated connection, max. 2.5 mm²             Rated data   Rated cross-section   Material data   Material UL 94 flammability rating   Creation date May 3, 2013 11:33:22 PM CEST   Catalogue status 12.03.2013 / We reserve the right to make technical changes. 2     Data sheet... SAK Series DK 4Q/35/TC TYP T   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data System specifications   Product family Connection direction Number of connections Levels cross-connected internally End cover plate required   SAK Series on side 4 No Yes           Type of connection Number of levels No. of clamping points per level Mounting rail   Screw connection 2 2 TS 35 EC000904 30-21-18-11 27-14-11-31 27-14-11-20         ETIM 3.0 eClass 4.1 eClass 6.2   EC000904 27-14-11-31 27-14-11-20 Classifications   ETIM 2.0 UNSPSC eClass 5.1 eClass 7.1   Approvals   Approvals ROHS   Conform Creation date May 3, 2013 11:33:22 PM CEST   Catalogue status 12.03.2013 / We reserve the right to make technical changes. 3