1289920000

    Data sheet... SAK Series SAKT 4/35/LT STB2.3 Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com     In order to do justice to the different requirements placed on our products, it is necessary to use various insulating materials tailored to the particular application. None of the insulating materials used by Weidmüller contain any hazardous substances. Above all, we ensure that all our materials are free from cadmium. Furthermore, they contain no colour pigments based on heavy metals and do not lead to the formation of dioxin/furan. General ordering data   Order No. Type Version GTIN (EAN) Qty.   1289920000 SAKT 4/35/LT STB2.3 SAK Series, Disconnect and modular disconnect terminal, Rated cross-section: 4 mm², Screw connection, Medium Yellow, Direct mounting 4008190040697 50 pc(s). Creation date May 7, 2013 4:15:40 PM CEST   Catalogue status 12.03.2013 / We reserve the right to make technical changes. 1     Data sheet... SAK Series SAKT 4/35/LT STB2.3   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions and weights   Length Height Net weight   57.2 mm 40 mm 17.56 g       Width Height of lowest version   -60 °C     Storage temperature Continuous operating temp., max. No 1 Snap-on       Installation advice Open sides     Conductor cross-section, flexible plus plastic collar DIN 46228/1, further connection, max. 6 mm 40 mm Temperatures   Operating temperature Continuous operating temp., min.   130 °C Additional technical data   Explosion-tested version Number of similar terminals Type of mounting   Direct mounting right Clampable wires (additional connection)   Conductor cross-section, flexible plus plastic collar DIN 46228/1, further connection, min.   0.5 mm² 4 mm² Clampable wires (rated connection)   Type of connection Screw connection Blade size 0.6 x 3.5 mm Number of connections 2 Clamping range, rated connection, max. 6 mm² Tightening torque, min. 0.4 Nm Torque level with DMS electric screwdriver 1 Wire connection cross section, solid core, max. rated connection 0.5 mm² Wire connection cross section, stranded, rated connection, min. 1.5 mm² Wire connection cross section, finely stranded, max. 4 mm² Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, rated connection, min. 0.5 mm² Wire connection cross section AWG, min. AWG 26             Stripping length Connection direction Clamping range, rated connection, min. Clamping screw Tightening torque, max. Gauge to IEC 60947-1 10 mm on side 0.13 mm² M 2.5 0.7 Nm     Tightening torque, max. Torque level with DMS electric screwdriver 0.7 Nm         Rated voltage Rated current Standards   400 V 32 A IEC 60947-7-1             A3 Wire connection cross section, solid core max. rated connection 6 mm² Wire connection cross section, stranded, rated connection, max. 4 mm² Wire connection cross-section, finely stranded, min. 0.5 mm² Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, rated connection, max. 4 mm² Wire connection cross section AWG, max. AWG 10 Disconnect terminals   Slitting Tightening torque, min.   sliding 0.4 Nm 1 Rated data   Rated cross-section Rated impulse withstand voltage Current at maximum wires Pollution severity   4 mm² 6 kV 41 A 3 Creation date May 7, 2013 4:15:40 PM CEST   Catalogue status 12.03.2013 / We reserve the right to make technical changes. 2     Data sheet... SAK Series SAKT 4/35/LT STB2.3   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Material data   Material UL 94 flammability rating   KrG V-0, 5VA     Colour   Medium Yellow SAK Series on side 2 No Yes           Type of connection Number of levels No. of clamping points per level Mounting rail   Screw connection 1 2 TS 35 EC000902 30-21-18-11 27-14-11-26 27-14-11-26         ETIM 3.0 eClass 4.1 eClass 6.2   EC000902 27-14-11-26 27-14-11-26 System specifications   Product family Connection direction Number of connections Levels cross-connected internally End cover plate required   Classifications   ETIM 2.0 UNSPSC eClass 5.1 eClass 7.1   Product information   Descriptive text technical data Descriptive text accessories Product description   Two conductors with the same cross-section can be accommodated. 1.5 mm² solid and 0.5...1.5 mm² flexible To safe the test sockets use the SD-blade or bits with pilots! 2 sockets 2.3 KrG Approvals   Approvals ROHS   Conform Creation date May 7, 2013 4:15:40 PM CEST   Catalogue status 12.03.2013 / We reserve the right to make technical changes. 3