1323660000

Product catalogue | Terminals | Screwing technology | SAK-series modular terminals | TS 35 | Polyamide PA 6.6 | Modular feed-through terminals | 4 mm² General ordering data Order No. Part designation Version EAN Qty. Product notes Note, technical data PT OKIECEx/ATEX rating data EU-type examination certificate Download, German Download English IECEx Certificate of Conformity ATEX voltage ATEX current ATEX conductor cross-section IECEx voltage IECEx current IECEx conductor cross-section Voltage when using cross-connections Operating temperature range 1323660000 SAK 4/35 OR Feed-through terminal, 4 mm², Screw connection, PA 66, Orange, TS 35 4008190129293 100 pc(s). With twin ferrules ZH 0.5 to ZH 2.5, rated voltage is 690 V. Marking EN 60079-7 Marking ATEX Directive 94/9/EC KEMA97ATEX1798U KEMA97ATEX1798U_d.pdf KEMA97ATEX1798U_e.pdf IECEXKEM06.0014U 550 V 28 A 4 mm² 550 V 28 A 4 mm² CrossConnectionGuide.pdf Einsatztemperaturbereich siehe EGBaumusterprüfbescheinigung/IECEx-Certificate of Conformity Ex e II Ex II 2 G D Additional technical data Colour of insulating material Connection direction End plate required Explosion-tested version "Ex e" Installation advice Insulating material Levels cross-connected internally No. of identical terminals No. of levels No. of terminal strips per level Open sides Operating temperature range Type of connection Type of mounting UL 94 flammability rating of insulation material Version Orange on side Yes Yes TS 35 PA 66 No 1 1 2 right - 50 °C, + 100 °C Screwed Snap-on V2 Feed-through terminal CSA rating data Voltage (CSA) CSA current 600 V 36 A -1- Product catalogue | Terminals | Screwing technology | SAK-series modular terminals | TS 35 | Polyamide PA 6.6 | Modular feed-through terminals | 4 mm² CSA rating data Min. cross-section (CSA) Max. cross-section (CSA) AWG 26 AWG 10 Conductors for clamping (additional connection) Flexible with ferrule, min. (DIN 46228 pt 1) Flexible with ferrule, max. (DIN 46228 pt 1) 0.5 mm² 4 mm² Conductors for clamping (rated connection) Clamping range, min. Clamping range, max. Type of connection 2nd type of connection Connection direction No. of connections Stripping length Clamping screw Blade size Tightening torque range Torque level with DMS electric screwdriver Gauge to IEC 60947-1 Solid, min. Solid, max. Stranded, min. Stranded, max. Flexible, min. Flexible, max. Flexible with ferrule, min. (DIN 46228/1) Flexible with ferrule, max. (DIN 46228/1) Flexible, min., ferrule with plastic collar (DIN 46228 pt 4) Flexible, max., ferrule with plastic collar (DIN 46228 pt 4) Twin wire-end ferrule, min. Twin wire end ferrule, max. AWG conductor size, min. AWG conductor size, max. 0.13 mm² 6 mm² Screw connection screwed on side 2 12 mm M3 0.6 x 3.5 mm 0.5...1.0 Nm 2 A4 0.5 mm² 6 mm² 0.5 mm² 4 mm² 0.5 mm² 4 mm² 0.5 mm² 4 mm² 0.5 mm² 4 mm² 0.5 mm² 2.5 mm² AWG 26 5.26 mm² Dimensions Width Height of lowest version Length TS 35 offset 6.5 mm 44 mm 45 mm 25 mm Disconnect terminals Torque level with DMS electric screwdriver 2 Rating data Rated cross-section Rated voltage Rated impulse voltage 4 mm² 800 V 8 kV -2- Product catalogue | Terminals | Screwing technology | SAK-series modular terminals | TS 35 | Polyamide PA 6.6 | Modular feed-through terminals | 4 mm² Rating data Rated current Standards Current with max. conductor Pollution severity 32 A IEC 60947-7-1 41 A 3 UL rating data Voltage (UL) Current (UL) Min. cross-section (UL) Max. cross-section (UL) 600 V 30 A AWG 22 AWG 12 Approvals Approvals institutes Classifications ETIM 2.0 ETIM 3.0 eClass 4.1 eClass 5.0 eClass 5.1 EC000897 EC000897 27-14-11-20 27-14-11-20 27-14-11-20 Similar products Order No. 0530360000 Part designation SAK 4/10/35 0443660000 SAK 4/35 0443680000 SAK 4/35 BL Version Feed-through terminal, 4 mm², Screw connection, PA 66, beige, TS 35 Feed-through terminal, 4 mm², Screw connection, PA 66, beige, TS 35 Feed-through terminal, 4 mm², Screw connection, PA 66, blue, TS 35 -3-