1375480000

    Data sheet ACT20M ACT20M-TCI-AO-S Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com     ACT20M: The slim solution • Safe and space-saving (6 mm) isolation and conversion • Quick installation of the power supply unit using the CH20M mounting rail bus • Easy configuration via DIP switch or FDT/DTM software • Extensive approvals such as ATEX, IECEX, GL, DNV • High interference resistance General ordering data   Type Order No. Version GTIN (EAN) Qty.   ACT20M-TCI-AO-S 1375480000 Temperature converter, Thermocouple, Input : Temperature, Output : I / U 4050118259650 1 pc(s). Creation date October 8, 2018 8:12:54 PM CEST   Catalogue status 28.09.2018 / We reserve the right to make technical changes. 1     Data sheet ACT20M ACT20M-TCI-AO-S   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions and weights   Width Height Depth Net weight   6.1 mm 112.5 mm 114.3 mm 84 g         Width (inches) Height (inches) Depth (inches)   0.24 inch 4.429 inch 4.5 inch Temperatures   Humidity Storage temperature, min. Ambient temperature   40 °C / 93 % rel. humidity,   no condensation   -40 °C   -25 °C...+70 °C Storage temperature, max. Operating temperature Storage temperature 85 °C -40 °C...85 °C Probability of failure   MTBF   147 Years     1 Thermocouple type J -100…+1200°C, Thermocouple type K -200…+1370°C     Sensor Temperature input range Thermocouple (type J, K)   Output voltage, note   Wire break detection   load impedance voltage configurable, 0(2)...10 V, 0(1)...5 V Configurable, 3.5 mA ⁄ 23 mA ⁄ none     Input   Number of inputs Input measurement range   Configurable, min. measurement range 50°C (TC) Output   Number of outputs Output current cold junction compensation load impedance current   1 configurable, 0...20 mA, 4...20 mA configurable internal or external coldjunction compensation (thermocouple) ≤ 600 Ω ≥ 10 kΩ General data   Accuracy Galvanic isolation Power consumption, max. Step response time Temperature coefficient   absolute accuracy: < ±0.05   % of the measurement range, Basic accuracy: < ±0.5°   3-way isolator   0.7 W   ≤ 30 ms, < 300 ms, Configurable 0,1 °C ⁄ °C, or, ≤0,01% des   Messbereichs⁄°C Configuration Mounting rail Power consumption, typ. Supply voltage   DIP switch TS 35 0.49 W 24 V DC ± 30 % Insulation coordination   EMC standards Insulation voltage Rated voltage   IEC 61326-1, NE 21 2.5 kVeff / 1 min. 300 Veff       Galvanic isolation Pollution severity Surge voltage category 3-way isolator 2 II Creation date October 8, 2018 8:12:54 PM CEST   Catalogue status 28.09.2018 / We reserve the right to make technical changes. 2     Data sheet ACT20M ACT20M-TCI-AO-S   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Data for Ex applications (ATEX)   Marking   II 3 G Ex nA IIC T4 Gc     Screw connection 0.6 Nm 0.5 mm²         Tightening torque, min. Clamping range, rated connection Clamping range, max. Wire connection cross section AWG, max. E337701.pdf     KEMA10ATEX0183X   Certificate No. (IECEX) IECEXKEM10.0090X EC002653 27-21-01-20 27-21-01-20 27-21-01-29         ETIM 6.0 eClass 7.1 eClass 9.0   EC002919 27-21-01-20 27-21-01-20 Connection data   Type of connection Tightening torque, max. Clamping range, min. Wire connection cross section AWG, min.   AWG 30 0.4 Nm 2.5 mm² 2.5 mm² AWG 14 Rated data UL   UL certificate   Ratings IECEx/ATEX/cUL   Certificate No. (ATEX)   Classifications   ETIM 5.0 eClass 6.2 eClass 8.1 eClass 9.1   Product information   Instructions for accessories   DIN mounting rail, see accessories Approvals   Approvals ROHS   Conform Downloads   Approval/Certificate/Document of Conformity Brochure/Catalogue Engineering Data Engineering Data Software User Documentation   Declaration of Conformity CAT 4.1 ELECTR 16/17 EN EPLAN, WSCAD, Zuken E3.S STEP DIP switch configuration tool instruction sheet Creation date October 8, 2018 8:12:54 PM CEST   Catalogue status 28.09.2018 / We reserve the right to make technical changes. 3     Data sheet ACT20M ACT20M-TCI-AO-S   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Drawings Connection diagram example for DIP switch setting (with ACT20M tool software) example for DIP switch setting (with ACT20M tool software) example for DIP switch setting (with ACT20M tool software) Creation date October 8, 2018 8:12:54 PM CEST   Catalogue status 28.09.2018 / We reserve the right to make technical changes. 4