1412950000

    Data sheet W-Series WDU 2.5 HV Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 1429-0 Fax: +49 5231 14292083 www.weidmueller.com     Klippon® Connect with clamping yoke Technology The high reliability and variety of designs of the terminal blocks with clamping yoke connections make planning easer and optimises operational safety. Klippon® Connect provides a proven response to a range of different requirements. General ordering data   Type Order No. Version GTIN (EAN) Qty.   WDU 2.5 HV 1412950000 Feed-through terminal, Screw connection, 2.5 mm², 1000 V, 24 A, Dark Beige 4050118237528 100 pc(s). Creation date October 30, 2017 9:08:03 PM CET   Catalogue status 20.10.2017 / We reserve the right to make technical changes. 1     Data sheet W-Series WDU 2.5 HV   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 1429-0 Fax: +49 5231 14292083 www.weidmueller.com Technical data Dimensions and weights   Width Height Depth Weight   5.1 mm 60 mm 46.5 mm 7g         Width (inches) Height (inches) Depth (inches) Net weight 0.201 inch 2.362 inch 1.831 inch 6.07 g -60 °C   Continuous operating temp., max. 130 °C Wemid V-0     Colour   Dark Beige Screw connection, for plug-in cross-connector, for screwable crossconnection, One end without connector   Tightening torque (clamping screw for aluminium conductors)   End cover plate required           Number of levels Number of potentials per tier PE connection N-function PEN function Temperatures   Continuous operating temp., min.   Material data   Material UL 94 flammability rating   System specifications   Version Tightening torque (clamping screw for copper conductors) Number of potentials No. of clamping points per level Levels cross-connected internally Mounting rail PE function   0.4...0.8 Nm 1 2 No TS 35 No 0.4 Nm Yes 1 1 No No No 2 clampable conductors (H05V/H07V) with equal cross-section (rated connection)   Cross-section for connected wire, solid, two clampable wires, min. 0.5 mm² Wire connection cross section, finely stranded, two clampable wires, min. 0.5 mm² Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, 2 clampable wires, min. 0.5 mm²         Cross-section for connected wire, solid, two clampable wires, max. 1.5 mm² Wire cross-section, finely stranded, two clampable wires, max. 1.5 mm² Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, 2 clampable wires, max. 1.5 mm² Additional technical data   Number of similar terminals Type of mounting   1 Snap-on     Open sides   right Creation date October 30, 2017 9:08:03 PM CET   Catalogue status 20.10.2017 / We reserve the right to make technical changes. 2     Data sheet W-Series WDU 2.5 HV   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 1429-0 Fax: +49 5231 14292083 www.weidmueller.com Technical data Conductors for clamping (rated connection)   Blade size 0.6 x 3.5 mm Clamping range, rated connection, min. 0.05 mm² Connection direction Gauge to IEC 60947-1 Stripping length Tightening torque, min. Twin wire-end ferrules, max. Type of connection Wire connection cross section AWG, min. on side A3 10 mm 0.4 Nm 1.5 mm² Screw connection AWG 30 Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, rated connection, min. 0.5 mm² Wire connection cross section, solid core max. rated connection 4 mm² Wire connection cross section, stranded, rated connection, max. 4 mm² Wire connection cross-section, finely stranded with wire-end ferrules and plastic collars DIN 46228/4, rated connection, max. 2.5 mm²                           Clamping range, rated connection, max. Clamping screw Cross-section for connected conductor, finely stranded with wire-end ferrules and plastic collars DIN 46228/4, rated connection, min. Number of connections Tightening torque, max. Torque level with DMS electric screwdriver Twin wire-end ferrules, min. Wire connection cross section AWG, max. Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, rated connection, max. Wire connection cross section, finely stranded, max. 4 mm² M 2.5 0.5 mm² 2 0.8 Nm 1 0.5 mm² AWG 12 2.5 mm² 4 mm² Wire connection cross section, solid core, min. rated connection 0.5 mm² Wire connection cross section, stranded, rated connection, min. 1.5 mm² Wire connection cross-section, finely stranded, min. 0.5 mm²   Rating data   Rated cross-section Rated current Standards Rated impulse withstand voltage   2.5 mm² 24 A IEC 60947-7-1 8 kV       1,000 V 32 A   Rated voltage Current at maximum wires Volume resistance according to IEC 60947-7-x Pollution severity           ETIM 5.0 UNSPSC eClass 6.2 eClass 8.1 eClass 9.1 EC000897 30-21-18-11 27-14-11-20 27-14-11-20 27-14-11-20 1.33 mΩ 3 Classifications   ETIM 3.0 ETIM 6.0 eClass 5.1 eClass 7.1 eClass 9.0   EC000897 EC000897 27-14-11-20 27-14-11-20 27-14-11-20 Approvals   Approvals ROHS   Conform Creation date October 30, 2017 9:08:03 PM CET   Catalogue status 20.10.2017 / We reserve the right to make technical changes. 3     Data sheet W-Series WDU 2.5 HV   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 1429-0 Fax: +49 5231 14292083 www.weidmueller.com Technical data Downloads   Approval/Certificate/Document of Conformity Brochure/Catalogue Engineering Data User Documentation   DE_PT1001_20160414_158_ISSUE01.pdf CAT 1 TERM 16/17 EN EPLAN, WSCAD, Zuken E3.S NTI_IECEx_WDU-WPE 2.5.pdf Safety note   Safety notice   Safety Information Creation date October 30, 2017 9:08:03 PM CET   Catalogue status 20.10.2017 / We reserve the right to make technical changes. 4     Data sheet W-Series WDU 2.5 HV   Drawings Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 1429-0 Fax: +49 5231 14292083 www.weidmueller.com Creation date October 30, 2017 9:08:03 PM CET   Catalogue status 20.10.2017 / We reserve the right to make technical changes. 5