1428980000

    Data sheet ModuPlug HDC MF 10B CA Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com     Simple The innovative sliding frame has two defined lock-in positions for opening and closing. This enables simple and tool-free module assembly. General ordering data   Type Order No. Version GTIN (EAN) Qty.   HDC MF 10B CA 1428980000 Frame 4050118233278 1 pc(s). Creation date May 28, 2019 7:06:23 PM CEST   Catalogue status 23.05.2019 / We reserve the right to make technical changes. 1     Data sheet ModuPlug HDC MF 10B CA   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions and weights   Width Height Depth Net weight   64 mm 36.4 mm 34.4 mm 67.541 g         Width (inches) Height (inches) Depth (inches)   -40 °C ... 125 °C     Lead 7439-92-1     Diecast zinc ≥ 500 4       Number of slots Series   10 mm² Screw connection     Conductor cross-section, min. 0.5 mm² Tightening torque, max. PE connection 1.2 Nm EC002312 27-14-34-19 27-44-02-06       ETIM 6.0 eClass 9.0   2.52 inch 1.433 inch 1.354 inch Temperatures   Limit temperature   Environmental Product Compliance   REACH SVHC   General data   Material Plugging cycles Size   3 ModuPlug PE connection data   Conductor cross-section, max. Connection type PE   Classifications   ETIM 5.0 eClass 6.2 eClass 9.1   EC002312 27-44-02-06 Approvals   Approvals ROHS   Conform Downloads   Brochure/Catalogue Engineering Data Engineering Data   CAT 3 HDC 17/18 EN FL FIELDWIRING EN EPLAN STEP Creation date May 28, 2019 7:06:23 PM CEST   Catalogue status 23.05.2019 / We reserve the right to make technical changes. 2     Data sheet ModuPlug HDC MF 10B CA   Drawings Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Creation date May 28, 2019 7:06:23 PM CEST   Catalogue status 23.05.2019 / We reserve the right to make technical changes. 3