1435590000

    Data sheet ACT20M ACT20M-RTCI-CO-OLP-S Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com     ACT20M: The slim solution • Safe and space-saving (6 mm) isolation and conversion • Quick installation of the power supply unit using the CH20M mounting rail bus • Easy configuration via DIP switch or FDT/DTM software • Extensive approvals such as ATEX, IECEX, GL, DNV • High interference resistance General ordering data   Type Order No. Version GTIN (EAN) Qty.   ACT20M-RTCI-CO-OLP-S 1435590000 Temperature converter, 2-/3-/4- wire RTD, Thermocouple, Input : Temperature, Output : 4-20 mA, (loop powered) 4050118240641 1 pc(s). Creation date October 8, 2018 8:30:59 PM CEST   Catalogue status 28.09.2018 / We reserve the right to make technical changes. 1     Data sheet ACT20M ACT20M-RTCI-CO-OLP-S   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions and weights   Width Height Depth Net weight   6.1 mm 112.5 mm 114.3 mm 80 g         Width (inches) Height (inches) Depth (inches)   0.24 inch 4.429 inch 4.5 inch Temperatures   Humidity Storage temperature, min. Ambient temperature   40 °C / 93 % rel. humidity,   no condensation   -40 °C   -25 °C...+70 °C Storage temperature, max. Operating temperature Storage temperature 85 °C -40 °C...85 °C Probability of failure   MTBF   207 Years       Sensor   Input measurement range   Temperature input range   Output current   cold junction compensation     Input   Number of inputs Influence of the sensor cable resistance Line resistance in measuring circuit   1 < 0.002 Ω⁄Ω 50 Ω@ RTD (Pt100), 10 kΩ @ TC (J, K) PT100 / 2-/3-/4-wire, Thermocouple acc. to IEC 584, type: J, Thermocouple acc. to IEC 584, type: K PT100 -200…+850 °C, Thermocouple type J -100…+1200°C, Thermocouple type K -200…+1370°C Configurable, min. measurement range 10°C (RTD), min. measurement range 50°C (TC) Output   Number of outputs Wire break detection Supply voltage   1 3.5 mA ⁄ 23 mA ⁄ none 16,8 V…31,2 V configurable, 4...20 mA, 20…4 mA configurable internal or external coldjunction compensation (thermocouple) Creation date October 8, 2018 8:30:59 PM CEST   Catalogue status 28.09.2018 / We reserve the right to make technical changes. 2     Data sheet ACT20M ACT20M-RTCI-CO-OLP-S   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data General data   Accuracy Configuration Mounting rail Power consumption, typ. Supply voltage   absolute accuracy: < ±0.05   % of the measurement range, RTD (PT100) Basic accuracy: < ±0.1 °C of the measurement range, TC (J,K) Basic accuracy: < ±0.5 °C of the measurement range   DIP switch   TS 35   0.48 W   Cold-junction compensation error Galvanic isolation Power consumption, max. Step response time Temperature coefficient ±(2.0 °C + 0.4 °C x Δt) Δt = inside temperature – ambient temperature 2-way isolator 0.8 W ≤ 30 ms, < 300 ms RTD (PT100) ≤0.01 % of the measurement range⁄°C or 0.02 °C ⁄ °C, TC (J,K) 0.1 °C ⁄ °C       Galvanic isolation Pollution severity Surge voltage category 2-way isolator 2 II II 3 G Ex nA IIC T4 Gc     Screw connection 0.6 Nm 0.5 mm²         Tightening torque, min. Clamping range, rated connection Clamping range, max. Wire connection cross section AWG, max. E337701.pdf     KEMA10ATEX0183X   Certificate No. (IECEX) IECEXKEM10.0090X EC002653 27-21-01-20 27-21-01-20 27-21-01-29         ETIM 6.0 eClass 7.1 eClass 9.0   EC002919 27-21-01-20 27-21-01-20 Output loop powered, 6… 35 V Insulation coordination   EMC standards Insulation voltage Rated voltage   IEC 61326-1, NE 21 2.5 kVeff / 1 min. 300 Veff Data for Ex applications (ATEX)   Marking   Connection data   Type of connection Tightening torque, max. Clamping range, min. Wire connection cross section AWG, min.   AWG 30 0.4 Nm 2.5 mm² 2.5 mm² AWG 14 Rated data UL   UL certificate   Ratings IECEx/ATEX/cUL   Certificate No. (ATEX)   Classifications   ETIM 5.0 eClass 6.2 eClass 8.1 eClass 9.1   Creation date October 8, 2018 8:30:59 PM CEST   Catalogue status 28.09.2018 / We reserve the right to make technical changes. 3     Data sheet ACT20M ACT20M-RTCI-CO-OLP-S   Technical data Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Product information   Product information Instructions for accessories   ACT20M-RTCI-CO-(E)OLP-S Configurable passive signal converter for temperature measurement of PT100, 2-, 3-, 4-wires and thermocouples type J and K. The 6.1 mm wide ACT20M-RTCI-CO-(E)OLP-S signal converter is output-current loop-powered and suitable for converting and isolating RTD and TC signals. Input and output parameters as well as a fast conversion time of 30 ms or 300 ms can be configured via DIP switch. The ACT20M temperature converter detects sensor errors (short-circuit, cable break) and issues corresponding NAMUR signal limits at the output (configurable upscale/ downscale). On the ACT20M-RTCI-CO-OLP-S the input/output channel is completely galvanically isolated with 2.5 kV. The ACT20M-RTCI-CO-EOLP-S does not have any galvanic isolation. The ACT20M product family features high accuracy of < 0.05% of the measurement range, a large temperature range of -25°C (0°C)...+70°C, outstanding EMC characteristics and international approvals (cULus, ATEX Zone2, FM Div2, GL, DNV). This permits use around the globe in a wide range of applications. Power is supplied directly on the module via the output-current loop. DIN mounting rail, see accessories Approvals   Approvals ROHS   Conform Downloads   Approval/Certificate/Document of Conformity Brochure/Catalogue Engineering Data Engineering Data Software User Documentation   Declaration of Conformity CAT 4.1 ELECTR 16/17 EN EPLAN, WSCAD, Zuken E3.S STEP DIP switch configuration tool instruction sheet Creation date October 8, 2018 8:30:59 PM CEST   Catalogue status 28.09.2018 / We reserve the right to make technical changes. 4     Data sheet ACT20M ACT20M-RTCI-CO-OLP-S   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Drawings Connection diagram example for DIP switch setting (with ACT20M tool software) example for DIP switch setting (with ACT20M tool software) Creation date October 8, 2018 8:30:59 PM CEST   Catalogue status 28.09.2018 / We reserve the right to make technical changes. 5