Data sheet
TERMSERIES
TRS 24VDC 1NO HC
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
TERMSERIES relay module, complete modules consisting
of
a relay and a base with AC/DC/UC coils,
available in different versions:
• With screw and tension-clamp connection
• Optionally with multiple-voltage input: 24...230 V UC
• With various protective circuits
in the input (free-wheel diode, RC element)
• Illuminated ejection lever
General ordering data
Type
Order No.
Version
GTIN (EAN)
Qty.
TRS 24VDC 1NO HC
1479780000
TERMSERIES, Relay module, No. of contacts: 1
NO contact AgSnO, Rated control voltage: 24
V DC ±20 %, Continuous current: 16 A, Screw
connection
4050118288100
10 pc(s).
Creation date July 2, 2018 4:37:23 PM CEST
Catalogue status 29.06.2018 / We reserve the right to make technical changes.
1
Data sheet
TERMSERIES
TRS 24VDC 1NO HC
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technical data
Dimensions and weights
Width
Height
Depth
Net weight
12.8 mm
89.6 mm
87.8 mm
56 g
Width (inches)
Height (inches)
Depth (inches)
5–95% rel. humidity, Tu =
40°C, no condensation
-40 °C
-40 °C
-40 °C...85 °C
Operating temperature, max.
Storage temperature, max.
Operating temperature
24 V DC ± 20 %
530 mW
15.5 mA / 2.8 mA DC
Free-wheel diode, Reverse
polarity protection
24 V DC
21 mA
18 V / 4 V DC
Green LED
Rated current DC
Pull-in/drop-out voltage, typ.
Status indicator
Coil voltage of the replacement relay
deviating from the rated control voltage
250 V AC
250 V
80 A / 20 ms
384 W @ 24 V
≤ 16 ms
0.1 Hz
Max. switching voltage, AC
Continuous current
AC switching capacity (resistive), max.
Switch-on delay
Min. switching power
250 V
16 A
4000 VA
≤ 7 ms
1W
1 NO contact (AgSnO)
Mechanical service life
10 x 106 switching cycles
TS 35
No
V-0
Test button
Colour
No
Black
300 V
2
Surge voltage category
III
Protection degree
IP20
Creepage and clearance distance input –
output
≥ 5.5 mm
Dielectric strength to mounting rail
4 kVeff / 1 min.
0.504 inch
3.528 inch
3.457 inch
Temperatures
Humidity
Operating temperature, min.
Storage temperature, min.
Storage temperature
60 °C
85 °C
-40 °C...60 °C
Input
Rated control voltage
Power rating
Pull-in/drop-out current, typ.
Protective circuit
Coil voltage of the replacement relay
No
Output
Rated switching voltage
Max. switching voltage, DC
Inrush current
DC switching capacity (resistive), max.
Switch-off delay
Max. switching frequency at rated load
Contact data
Contact type
General data
Mounting rail
Mechanical switch position indicator
UL 94 flammability rating
Insulation coordination
Rated voltage
Pollution severity
Dielectric strength input – output
Dielectric strength of open contact
Impulse withstand voltage
1.2 kVeff / 5 s
1.2 kVeff / 1 min.
6 kV (1.2/50 µs)
Further details of approvals / standards
Standards
Certificate no. (cULus)
EN 50178, EN 55011, EN
61000-6-1, 2, 4
E141197
Certificate No. (DNVGL)
TAA00001E5
Creation date July 2, 2018 4:37:23 PM CEST
Catalogue status 29.06.2018 / We reserve the right to make technical changes.
2
Data sheet
TERMSERIES
TRS 24VDC 1NO HC
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technical data
Connection data
Wire connection method
Tightening torque, max.
Clamping range, min.
Wire connection cross section AWG,
min.
Wire cross-section, solid, min.
Wire connection cross-section, finely
stranded, min.
Wire cross-section, finely stranded, min.
(AWG)
Wire connection cross-section, finely
stranded with wire-end ferrules DIN
46228/4, min.
Conductor cross-section, flexible, AEH
(DIN 46228-1), min.
Wire connection cross section, finely
stranded, two clampable wires, min.
Twin wire-end ferrules, min.
Blade size
Screw connection
0.4 Nm
0.14 mm²
AWG 26
0.14 mm²
0.14 mm²
AWG 26
0.25 mm²
0.25 mm²
0.5 mm²
0.5 mm²
size PH0
Stripping length, rated connection
8 mm
Clamping range, rated connection
1.5 mm²
Clamping range, max.
2.5 mm²
Wire connection cross section AWG,
max.
AWG 14
Wire cross-section, solid, max.
2.5 mm²
Wire connection cross section, finely
stranded, max.
2.5 mm²
Wire cross-section, finely stranded, max.
(AWG)
AWG 14
Wire connection cross-section, finely
stranded with wire-end ferrules DIN
46228/4, max.
2.5 mm²
Conductor cross-section, flexible, AEH
(DIN 46228-1), max.
2.5 mm²
Wire cross-section, finely stranded, two
clampable wires, max.
1 mm²
Twin wire-end ferrules, max.
1 mm²
Gauge to IEC 60947-1
A1, B1
Connection cross-section AWG, min.
Type of conductor
Pollution severity level
ETIM 6.0
eClass 7.1
eClass 9.0
Rated data UL
Ambient temperature (operational), max. 60 °C
Connection cross-section AWG, max.
AWG 14
Tightening torque, max.
0.4 Nm
AWG 26
rigid copper conductor,
flexible copper conductor
2
Classifications
ETIM 5.0
eClass 6.2
eClass 8.1
eClass 9.1
EC001437
27-37-16-01
27-37-16-01
27-37-16-01
EC001437
27-37-16-01
27-37-16-01
Approvals
Approvals
ROHS
Conform
Downloads
Approval/Certificate/Document of
Conformity
Brochure/Catalogue
Engineering Data
Engineering Data
User Documentation
DE_PA5600_160229_001.pdf
CAT 4.2 ELECTR 18/19 EN
EPLAN, WSCAD, Zuken E3.S
STEP
Operating Instructions
Creation date July 2, 2018 4:37:23 PM CEST
Catalogue status 29.06.2018 / We reserve the right to make technical changes.
3
Data sheet
TERMSERIES
TRS 24VDC 1NO HC
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Drawings
Wiring diagram
Graph
DC load limit curve
Resistive load
Dimensional drawing
Creation date July 2, 2018 4:37:23 PM CEST
Catalogue status 29.06.2018 / We reserve the right to make technical changes.
4
Data sheet
TERMSERIES
TRS 24VDC 1NO HC
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Drawings
Miscellaneous
Type codes
Creation date July 2, 2018 4:37:23 PM CEST
Catalogue status 29.06.2018 / We reserve the right to make technical changes.
5