1481960000

    Data sheet ACT20P ACT20P-PRO DCDC II-P Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com     Similar to illustration ACT20P: The flexible solution • Precise and highly functional signal converters • Simple configuration via display (Pro DCDC II), FDT/ DTM software or DIP switch • Release levers simplify handling • More space in the control cabinet, from 12.5 mm wide for two channels General ordering data   Type Order No. Version GTIN (EAN) Qty.   ACT20P-PRO DCDC II-P 1481960000 ACT20P, Signal converter/insulator, Signal converter/isolator, All-purpose, 24…230 V AC/DC power supply 4050118291025 1 pc(s). Creation date January 8, 2019 9:20:33 PM CET   Catalogue status 04.01.2019 / We reserve the right to make technical changes. 1     Data sheet ACT20P ACT20P-PRO DCDC II-P   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions and weights   Width Height Depth Weight           Width (inches) Height (inches) Depth (inches) Net weight   Storage temperature       Input voltage   approx. 1 MΩ < 5 mA: approx. 100 Ω; >5   mA: approx. 5 Ω Input current 12.5 mm 117.2 mm 113.7 mm 130 g 0.492 inch 4.614 inch 4.476 inch 20 g Temperatures   Operating temperature   Environmental Product Compliance   REACH SVHC   Lead 7439-92-1 Input   Number of inputs Input resistance, voltage Input resistance, current   1   configurable, ±20 mV… ±300 V, min. measuring range 40 mV configurable, ± 0.1mA...± 100 mA Output   Output voltage, note Cut-off frequency (-3 dB) load impedance current Offset current   adjustable, 0...±10 V > 10 kHz/ < 10 Hz ≤ 600 Ω 20 µA         Output current load impedance voltage Offset voltage Status indicator adjustable, 0...±20 mA ≥ 1 kΩ < 10 mV Green LED Dot-matrix display with ticker text, green   Display value current measured value, Configuration data < 0.05 % of measuring range 3-way isolator, between input ⁄ output ⁄ supply ≤2.3 W 24…230 V DC ±20 %, 24…230 V AC ±10 % @ 48…62 Hz   Configuration   Mounting rail DIP switch, or via display and push-buttons     Step response time Temperature coefficient 3-way isolator, between input ⁄ output ⁄ supply 4 kVeff, input ⁄ output ⁄ power supply 600 V   Impulse withstand voltage   Pollution severity   Surge voltage category Display   Type   General data   Accuracy Galvanic isolation Power consumption Supply voltage   TS 35 ≤50 ms ≤0.01% of the output measurement range ⁄ °C Insulation coordination   Galvanic isolation Insulation voltage Rated voltage   5 kV (1.2/50 µs) 2 II Creation date January 8, 2019 9:20:33 PM CET   Catalogue status 04.01.2019 / We reserve the right to make technical changes. 2     Data sheet ACT20P ACT20P-PRO DCDC II-P   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Connection data   Type of connection Tightening torque, max. Clamping range, min. Wire connection cross section AWG, min.           Tightening torque, min. Clamping range, rated connection Clamping range, max. Wire connection cross section AWG, max. DEMKO15ATEX1397X     EC002653 27-21-01-20     eClass 6.2   PUSH IN 0.6 Nm 0.5 mm² AWG 30 0.4 Nm 2.5 mm² 2.5 mm² AWG 14 Ratings IECEx/ATEX/cUL   Certificate No. (ATEX)   Classifications   ETIM 6.0 eClass 9.1   27-21-01-20 Product information   Product information   The universally configurable DC isolating amplifier ACT20P-PRO DCDC II isolates and converts analogue signals. An analogue input signal (current or voltage) is linearly converted into an analogue output signal (current or voltage) and galvanically isolated. The power supply is galvanically isolated from the input and output (3-way isolation). Properties • universal wide-range voltage supply • universally configurable via DIP switch or via the LED display using control buttons • Active or passive signal output • Operating status display on a front panel LED • Galvanic 3-way isolation between input, output and supply. Approvals   Approvals Approvals ROHS   CULUS;GERMLLOYD; Conform Downloads   Approval/Certificate/Document of Conformity Software User Documentation   Declaration of Conformity UL file number DNV German Loyd approval DIP switch configuration tool Instruction sheet Creation date January 8, 2019 9:20:33 PM CET   Catalogue status 04.01.2019 / We reserve the right to make technical changes. 3     Data sheet ACT20P ACT20P-PRO DCDC II-P   Drawings Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Wiring Dimensioned drawing, Similar to illustration Creation date January 8, 2019 9:20:33 PM CET   Catalogue status 04.01.2019 / We reserve the right to make technical changes. 4     Data sheet ACT20P ACT20P-PRO DCDC II-P   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Drawings example for DIP switch setting (with ACT20 tool) Creation date January 8, 2019 9:20:33 PM CET   Catalogue status 04.01.2019 / We reserve the right to make technical changes. 5