1539220000

    Data sheet OMNIMATE Signal - series BL/SL 5.08 SL 5.08HC/11/180B 4.5SN OR BX Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com     Product image Similar to illustration Pin headers in glass-fibre-reinforced plastic with straight wire outlet; optimised for wave soldering. The flange variant (F) can be screwed onto the respective counter piece or the circuit board. There is no need for an extra screw to connect the circuit board when the solder flange (LF) version is used. This also protects the solder points from mechanical strain. All pin headers can be manually coded or ordered pre-coded. HC = High Current. General ordering data   Type Order No. Version GTIN (EAN) Qty. Product data Packaging SL 5.08HC/11/180B 4.5SN OR BX 1539220000 PCB plug-in connector, male header, Dovetails for fixing blocks, THT solder connection, 5.08 mm, Number of poles: 11, 180°, Solder pin length (l): 4.5 mm, tinned, orange, Box 4050118343830 50 pc(s). IEC: 400 V / 24 A UL: 300 V / 18.5 A Box Creation date August 11, 2020 5:48:54 PM CEST     Catalogue status 24.07.2020 / We reserve the right to make technical changes. 1     Data sheet OMNIMATE Signal - series BL/SL 5.08 SL 5.08HC/11/180B 4.5SN OR BX   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions and weights   Width Height Height of lowest version Depth (inches)   57.64 16.5 mm 12 mm 0.335 inch         Width (inches) Height (inches) Depth Net weight   Type of connection                         Pitch in mm (P) Outgoing elbow Number of solder pins per pole Solder pin length tolerance Solder pin dimensions Solder eyelet hole diameter (D) L1 in mm Number of rows Volume resistance Plugging cycles Plugging force/pole, max. Pulling force/pole, max.       Colour Insulating material group Insulation strength 2.269 inch 0.65 inch 8.5 mm 4.027 g System specifications   Product family OMNIMATE Signal - series BL/SL 5.08 Mounting onto the PCB THT solder connection Pitch in inches (P) 0.2 inch Number of poles 11 Solder pin length (l) 4.5 mm Tolerance of solder pin position ± 0.15 mm Solder pin dimensions = d tolerance 0 / -0,03 mm Solder eyelet hole diameter tolerance (D)+ 0,1 mm L1 in inches 2 inch Pin series quantity 1 Can be coded Yes Plugging force/pole, min. 6.5 N Pulling force / pole, min. 4.5 N   Board connection 5.08 mm 180° 1 +0.1 / -0.3 mm d = 1.2 mm, Octagonal 1.3 mm 50.8 mm 1 ≤ 5mΩ 25 10 N 7.5 N Material data   Insulating material Colour chart (similar) Comparative Tracking Index (CTI) UL 94 flammability rating Contact material Layer structure of solder connection Storage temperature, min. Operating temperature, min. Temperature range, installation, min.   PA GF RAL 2000 ≥ 550 V-0 CuMg 1...3 µm Ni / 2...4 µm Sn matt -40 °C -50 °C -25 °C       GWFI Contact surface Layer structure of plug contact       Storage temperature, max. Operating temperature, max. Temperature range, installation, max.     Rated current, min. number of poles (Tu=20°C) Rated current, min. number of poles (Tu=40°C) Rated voltage for surge voltage class / pollution degree II/2 Rated voltage for surge voltage class / pollution degree III/3 Rated impulse voltage for surge voltage class/ pollution degree III/2       Rated voltage (Use group D / CSA) Rated current (Use group D / CSA) orange II ≥ 108 Ω 960 °C tinned 1...3 µm Ni / 2...4 µm Sn matt 70 °C 100 °C 100 °C Rated data acc. to IEC   tested acc. to standard Rated current, max. number of poles (Tu=20°C) Rated current, max. number of poles (Tu=40°C) Rated voltage for surge voltage class / pollution degree III/2 Rated impulse voltage for surge voltage class/ pollution degree II/2 Rated impulse voltage for surge voltage class/ contamination degree III/3   IEC 60664-1, IEC 61984 19 A 16.5 A 320 V 4 kV 4 kV         24 A 21 A 400 V 250 V 4 kV Rated data acc. to CSA   Rated voltage (Use group B / CSA) Rated current (Use group B / CSA)   300 V 18.5 A 300 V 18.5 A Creation date August 11, 2020 5:48:54 PM CEST   Catalogue status 24.07.2020 / We reserve the right to make technical changes. 2     Data sheet OMNIMATE Signal - series BL/SL 5.08 SL 5.08HC/11/180B 4.5SN OR BX   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Rated data acc. to UL 1059   Institute (cURus)     Rated voltage (Use group B / UL 1059) 300 V   Rated current (Use group B / UL 1059) 18.5 A   Reference to approval values Specifications are maximum values, details see approval certificate. Certificate No. (cURus) E60693 Rated voltage (Use group D / UL 1059) 300 V Rated current (Use group D / UL 1059) 10 A     Packing   Packaging VPE width   Box 0     VPE length VPE height 0 0 EC002637 27-44-04-02 27-44-04-02       ETIM 7.0 eClass 9.1   EC002637 27-44-04-02 Classifications   ETIM 6.0 eClass 9.0 eClass 10.0   Notes   Notes IPC conformity   • Long term storage of the product with average temperature of 50 °C and average humidity 70%, 36 months Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request. Approvals   Approvals ROHS   Conform Downloads   Approval/Certificate/Document of Conformity Brochure/Catalogue Product Change Notification   CB Certificate CB Testreport FL DRIVES EN FL DRIVES DE EN - Change of packaging DE - Change of packaging Creation date August 11, 2020 5:48:54 PM CEST   Catalogue status 24.07.2020 / We reserve the right to make technical changes. 3     Data sheet OMNIMATE Signal - series BL/SL 5.08 SL 5.08HC/11/180B 4.5SN OR BX   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Drawings Dimensional drawing Product benefits Graph Safe power transmission Proven properties Graph Graph Creation date August 11, 2020 5:48:54 PM CEST   Catalogue status 24.07.2020 / We reserve the right to make technical changes. 4 Wave Solder Profile   Recommended wave solderding profiles Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com   Single Wave:   260 Contact time appr. 3 sec. 260 °C 255 °C 250 °C 240 220 200 Temperature [°C] 180 160 140 appr. 150 °C Preheating 120 100 Cooling rate < 6 °K/s 80 60 Typical process Prozess limits Temperature on board 40 Heating rate < 3 °K/s 20 0 0 20 40 60 80 100 120 time [s] 140 160 180 200 220 240 Double Wave: 255 °C Total contact time max. 10 sec. 260 240 260 °C 250 °C 220 200 Temperature [°C] 180 160 140 appr. 150°C Preheating 120 100 Cooling rate < 6 °K/s 80 60 Typical process Process limits Temperature on board 40 Heating rate < 3 °K/s 20 0 0 20 40 60 Wave soldering profiles 80 100 120 time [s] 140 160 180 200 220 240 Wired connection elements should be processed in accordance with the DIN EN 61760-1 standard. We have included two recommendations for practical wave soldering profiles, with which Weidmüller PCB terminals and connectors are qualified. When choosing a suitable profile for your application, the following factors also need to be considered: - PCB thickness - Proportion of Cu in the layers - Single/double-sided assembly - Product range - Heating and cooling rates The single and double wave profiles each indicate the recommended operating range, including the maximum soldering temperature of 260°C. In practice, the maximum soldering temperature is quite often well below the above maximum profile.   We reserve the right to make technical changes.