1542360000

    Data sheet D-SERIES DRM DRMKIT 24VDC 2CO LD Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com     Product image Our relay kits are particularly convenient to use. The kits are delivered fully assembled and 100 % function-tested. This saves assembly time and reduces the number of parts required. • Assembled kit consisting of relay, base and retaining clip, incl. label • 100% function-tested • 100% control of the dielectric strength input - output • Optional: test button with coloured control voltage marking (AC coil: red / DC coil: blue) and mechanical switch position indicator • Bright status LED (AC coil: red / DC coil: green) General ordering data   Type Order No. Version GTIN (EAN) Qty.   DRMKIT 24VDC 2CO LD 1542360000 D-SERIES DRM, Relay module, No. of contacts: 2 CO contact AgNi 0,15 µm Au, Rated control voltage: 24 V DC, Continuous current: 10 A, Screw connection 4050118347234 10 pc(s). Creation date January 18, 2019 6:32:39 PM CET   Catalogue status 04.01.2019 / We reserve the right to make technical changes. 1     Data sheet D-SERIES DRM DRMKIT 24VDC 2CO LD   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions and weights   Width Height Depth Net weight   27.2 mm 79.9 mm 66.8 mm 93.35 g         Width (inches) Height (inches) Depth (inches)   1.071 inch 3.146 inch 2.63 inch 60 °C 70 °C -40 °C...60 °C       Operating temperature, min. Storage temperature, min. Storage temperature -40 °C -40 °C -40 °C...70 °C Lead 7439-92-1     24 V DC 0.9 W 650 Ω ± 10 % Free-wheel diode         Rated current DC Pull-in/drop-out voltage, typ. Status indicator   36.9 mA 18 V / 2.4 V DC Green LED 250 V AC 10 A 2500 VA < 20 ms 10 mA @ 12 V, 100 mA @ 5V           Max. switching voltage, AC Inrush current DC switching capacity (resistive), max. Switch-off delay Max. switching frequency at rated load 250 V 20 A / 50 ms 240 W @ 24 V < 20 ms 2 CO contact (AgNi 0,15 µm Au)   Contact resistance TS 35 Yes V-0       Test button Colour   No Black         Surge voltage category Insulating material group Dielectric strength input – output Dielectric strength of neighbouring contacts Impulse withstand voltage III C 1.8 kVeff / 1 min. Temperatures   Operating temperature, max. Storage temperature, max. Operating temperature   Environmental Product Compliance   REACH SVHC   Input   Rated control voltage Power rating Coil resistance Protective circuit   Output   Rated switching voltage Continuous current AC switching capacity (resistive), max. Switch-on delay Min. switching power   0.1 Hz Contact data   Contact type Mechanical service life   20 x 106 switching cycles     ≤ 50 mΩ General data   Mounting rail Mechanical switch position indicator UL 94 flammability rating   Insulation coordination   Rated voltage 250 V Pollution severity 2 Protection degree IP20 Creepage and clearance distance input – output ≥ 5.5 mm Dielectric strength of open contact 1 kVeff / 1 min     1 kVeff / 1 min 4.8 kV (1.2/50 µs) Creation date January 18, 2019 6:32:39 PM CET   Catalogue status 04.01.2019 / We reserve the right to make technical changes. 2     Data sheet D-SERIES DRM DRMKIT 24VDC 2CO LD   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Further details of approvals / standards   Certificate no. (cURus) relay   E312083   Certificate no. (cURus) base E312083 Screw connection 0.5 Nm 0.5 mm² 0.5 mm²           7 mm 0.7 Nm 2.5 mm² 2.5 mm²   Stripping length, rated connection Tightening torque, max. Clamping range, max. Wire cross-section, solid, max. Wire connection cross section, finely stranded, max. Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max. Conductor cross-section, flexible, AEH (DIN 46228-1), max. Wire cross-section, finely stranded, two clampable wires, max.           ETIM 6.0 eClass 7.1 eClass 9.0   EC001437 27-37-16-01 27-37-16-01 Connection data   Wire connection method Tightening torque, min. Clamping range, min. Wire cross-section, solid, min. Wire connection cross-section, finely stranded, min. Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min. Conductor cross-section, flexible, AEH (DIN 46228-1), min. Wire connection cross section, finely stranded, two clampable wires, min. Blade size   0.5 mm² 0.5 mm² 0.5 mm² 0.5 mm² size PH1       2.5 mm² 2.5 mm² 2.5 mm² 1 mm² Classifications   ETIM 5.0 eClass 6.2 eClass 8.1 eClass 9.1   EC001437 27-37-16-90 27-37-16-01 27-37-16-01 Approvals   ROHS   Conform Downloads   Approval/Certificate/Document of Conformity Engineering Data Engineering Data   DE_PA_5600_160317_001.pdf EPLAN, WSCAD, Zuken E3.S STEP Creation date January 18, 2019 6:32:39 PM CET   Catalogue status 04.01.2019 / We reserve the right to make technical changes. 3     Data sheet D-SERIES DRM DRMKIT 24VDC 2CO LD   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Drawings Wiring diagram Graph Graph Graph DC load limit curve Resistive load Electrical service life Graph Derating curve Dimensional drawing DC operational voltage range Creation date January 18, 2019 6:32:39 PM CET   Catalogue status 04.01.2019 / We reserve the right to make technical changes. 4     Data sheet D-SERIES DRM DRMKIT 24VDC 2CO LD   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Drawings Miscellaneous Type codes Creation date January 18, 2019 6:32:39 PM CET   Catalogue status 04.01.2019 / We reserve the right to make technical changes. 5