Data sheet
LP 5.08/02/135 4.5SN OR BX
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 26
D-32758 Detmold
Germany
www.weidmueller.com
Product image
Similar to illustration
Test point, 32 A and 6 mm² conductor cross-section are
feasible with this PCB terminal with proven clamping yoke
connection at 5.00 and 5.08 mm pitch, conductor outlet
direction 90° and 135°, with extensive auxiliary functions.
General ordering data
Version
Order No.
Type
GTIN (EAN)
Qty.
Product data
Packaging
Available
until
Creation
date
Printed circuit board terminals, 5.08 mm, Number
of poles: 2, 135°, Solder pin length (l): 4.5 mm,
tinned, orange, Clamping yoke connection,
Clamping range, max. : 6 mm², Box
1595740000
LP 5.08/02/135 4.5SN OR BX
4008190190248
100 pc(s).
IEC: 500 V / 32 A / 0.5 - 6 mm²
UL: 300 V / 20 A / AWG 26 - AWG 12
Box
2019-12-31
February
5, 2024 12:05:29 PM CET
Catalogue status 27.01.2024 / We reserve the right to make technical changes.
1
Data sheet
LP 5.08/02/135 4.5SN OR BX
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 26
D-32758 Detmold
Germany
www.weidmueller.com
Technical data
Dimensions and weights
Depth
Height
Height of lowest version
Width (inches)
17.5 mm
21.3 mm
16.8 mm
0.424 inch
Depth (inches)
Height (inches)
Width
Net weight
Wire connection method
Conductor outlet direction
Pitch in inches (P)
Pin series quantity
Number of rows
Solder pin length (l)
Solder eyelet hole diameter (D)
Number of solder pins per pole
Screwdriver blade standard
Tightening torque, max.
Stripping length
L1 in inches
Touch-safe protection acc. to DIN VDE
57 106
Volume resistance
Colour
Insulating material group
UL 94 flammability rating
Contact surface
Tinning type
Storage temperature, min.
Operating temperature, min.
Temperature range, installation, min.
0.689 inch
0.839 inch
10.76 mm
3.21 g
System parameters
Product family
OMNIMATE Signal - series
LP
Mounting onto the PCB
THT solder connection
Pitch in mm (P)
5.08 mm
Number of poles
2
Fitted by customer
Yes
Max. adjacent poles per row
24
Solder pin dimensions
0.75 x 0.9 mm
Solder eyelet hole diameter tolerance (D)+ 0,1 mm
Screwdriver blade
0.6 x 3.5
Tightening torque, min.
0.5 Nm
Clamping screw
M3
L1 in mm
5.08 mm
Touch-safe protection acc. to DIN VDE
0470
IP 20
Protection degree
IP20
Clamping yoke connection
135°
0.2 "
1
1
4.5 mm
1.3 mm
1
DIN 5264
0.6 Nm
6 mm
0.2 "
Safe from finger touch
1.20 mΩ
Material data
Insulating material
Colour chart (similar)
Comparative Tracking Index (CTI)
Contact material
Coating
Layer structure of solder connection
Storage temperature, max.
Operating temperature, max.
Temperature range, installation, max.
PA
RAL 2000
≥ 600
Cu-alloy
1-3 μm Ni, 4-6 μm SN
4...6 µm Ni / 4...6 µm Sn
70 °C
100 °C
100 °C
orange
I
V-2
tinned
matt
-40 °C
-50 °C
-25 °C
Conductors suitable for connection
Clamping range, min.
0.13 mm²
Clamping range, max.
6 mm²
Wire connection cross section AWG,
AWG 26
min.
Wire connection cross section AWG,
AWG 12
max.
Solid, min. H05(07) V-U
0.5 mm²
Solid, max. H05(07) V-U
6 mm²
Flexible, min. H05(07) V-K
0.5 mm²
Flexible, max. H05(07) V-K
4 mm²
w. plastic collar ferrule, DIN 46228 pt 4, 0.5 mm²
min.
w. plastic collar ferrule, DIN 46228 pt 4, 2.5 mm²
max.
w. wire end ferrule, DIN 46228 pt 1,
0.5 mm²
min.
w. wire end ferrule, DIN 46228 pt 1,
2.5 mm²
max.
Creation date February 5, 2024 12:05:29 PM CET
Catalogue status 27.01.2024 / We reserve the right to make technical changes.
2
Data sheet
LP 5.08/02/135 4.5SN OR BX
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 26
D-32758 Detmold
Germany
www.weidmueller.com
Technical data
Plug gauge in accordance with EN
60999 a x b; ø
Clampable conductor
Reference text
2.8 mm x 2.4 mm; 3.0 mm
Cross-section for conductor connection
Type
fine-wired
nominal
0.5 mm²
Stripping length
nominal 8 mm
wire end ferrule
Recommended wire- H0,5/12 OR
end ferrule
nominal 6 mm
Stripping length
Recommended wire- H0,5/6
end ferrule
Type
fine-wired
Cross-section for conductor connection
nominal
0.75 mm²
Stripping length
nominal 8 mm
wire end ferrule
Recommended wire- H0,75/12 W
end ferrule
nominal 6 mm
Stripping length
Recommended wire- H0,75/6
end ferrule
Type
fine-wired
Cross-section for conductor connection
nominal
1 mm²
Stripping length
nominal 8 mm
wire end ferrule
Recommended wire- H1,0/12 GE
end ferrule
nominal 6 mm
Stripping length
Recommended wire- H1,0/6
end ferrule
Length of ferrules is to be chosen depending on the product and the rated voltage., The outside
diameter of the plastic collar should not be larger than the pitch (P)
Rated data acc. to IEC
tested acc. to standard
Rated current, max. number of poles
(Tu=20°C)
Rated current, max. number of poles
(Tu=40°C)
Rated voltage for surge voltage class /
pollution degree III/2
Rated impulse voltage for surge voltage
class/ pollution degree II/2
Rated impulse voltage for surge voltage
class/ contamination degree III/3
IEC 60664-1, IEC 61984
30.5 A
25 A
250 V
4 kV
4 kV
Rated current, min. number of poles
(Tu=20°C)
Rated current, min. number of poles
(Tu=40°C)
Rated voltage for surge voltage class /
pollution degree II/2
Rated voltage for surge voltage class /
pollution degree III/3
Rated impulse voltage for surge voltage
class/ pollution degree III/2
Short-time withstand current resistance
Certificate No. (CSA)
Rated voltage (Use group D / CSA)
Rated current (Use group D / CSA)
Wire cross-section, AWG, max.
32 A
32 A
500 V
250 V
4 kV
3 x 1s with 120 A
Rated data acc. to CSA
Institute (CSA)
Rated voltage (Use group B / CSA)
Rated current (Use group B / CSA)
Wire cross-section, AWG, min.
Reference to approval values
300 V
20 A
AWG 26
Specifications are
maximum values, details see approval certificate.
200039-1202191
300 V
10 A
AWG 12
Creation date February 5, 2024 12:05:29 PM CET
Catalogue status 27.01.2024 / We reserve the right to make technical changes.
3
Data sheet
LP 5.08/02/135 4.5SN OR BX
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 26
D-32758 Detmold
Germany
www.weidmueller.com
Technical data
Rated data acc. to UL 1059
Rated voltage (Use group B / UL 1059) 300 V
Rated current (Use group B / UL 1059) 20 A
Wire cross-section, AWG, min.
AWG 26
Rated voltage (Use group D / UL 1059) 300 V
Rated current (Use group D / UL 1059) 10 A
Wire cross-section, AWG, max.
AWG 12
Box
103 mm
VPE length
VPE height
118 mm
65 mm
EC002643
EC002643
27-44-04-01
27-44-04-01
27-46-01-01
ETIM 7.0
ETIM 9.0
ECLASS 9.1
ECLASS 11.0
ECLASS 13.0
EC002643
EC002643
27-44-04-01
27-46-01-01
27460101
Packing
Packaging
VPE width
Classifications
ETIM 6.0
ETIM 8.0
ECLASS 9.0
ECLASS 10.0
ECLASS 12.0
Important note
IPC conformity
Notes
Conformity: The products are developed, manufactured and delivered according international recognized
standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties
in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request.
• Additional variants on request
• Rated current related to rated cross-section & min. No. of poles.
• Wire end ferrule without plastic collar to DIN 46228/1
• Wire end ferrule with plastic collar to DIN 46228/4
• P on drawing = pitch
• Rated data refer only to the component itself. Clearance and creepage distances to other components are to
be designed in accordance with the relevant application standards.
• The test point can only be used as potential-pickup point.
• It is necessary to hold the insulating body of the one or two pole terminal when tightening the screw
• Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36
months
Approvals
Approvals
ROHS
Conform
Creation date February 5, 2024 12:05:29 PM CET
Catalogue status 27.01.2024 / We reserve the right to make technical changes.
4
Data sheet
LP 5.08/02/135 4.5SN OR BX
Technical data
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 26
D-32758 Detmold
Germany
www.weidmueller.com
Downloads
Product Change Notification
Catalogues
Brochures
PCN_2016_273_PL32_Loss_of_nickle_LL_LP_Family_EN
PCN_2016_273_PL32_Wegfall_Unternickelung_LL_LP_Familie_DE
Catalogues in PDF-format
FL DRIVES EN
FL DRIVES DE
Creation date February 5, 2024 12:05:29 PM CET
Catalogue status 27.01.2024 / We reserve the right to make technical changes.
5
Data sheet
LP 5.08/02/135 4.5SN OR BX
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 26
D-32758 Detmold
Germany
www.weidmueller.com
Drawings
Dimensional drawing
Graph
Creation date February 5, 2024 12:05:29 PM CET
Catalogue status 27.01.2024 / We reserve the right to make technical changes.
6
Wave Solder Profile
Recommended wave solderding profiles
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Single Wave:
260
Contact time appr. 3 sec.
260 °C
255 °C
250 °C
240
220
200
Temperature [°C]
180
160
140
appr. 150 °C
Preheating
120
100
Cooling rate < 6 °K/s
80
60
Typical process
Prozess limits
Temperature on board
40
Heating rate < 3 °K/s
20
0
0
20
40
60
80
100
120
time [s]
140
160
180
200
220
240
Double Wave:
255 °C
Total contact time max. 10 sec.
260
240
260 °C
250 °C
220
200
Temperature [°C]
180
160
140
appr. 150°C
Preheating
120
100
Cooling rate < 6 °K/s
80
60
Typical process
Process limits
Temperature on board
40
Heating rate < 3 °K/s
20
0
0
20
40
60
Wave soldering profiles
80
100
120
time [s]
140
160
180
200
220
240
Wired connection elements should be processed in accordance with the DIN EN 61760-1 standard. We have included
two recommendations for practical wave soldering profiles, with which Weidmüller PCB terminals and connectors are
qualified.
When choosing a suitable profile for your application, the following factors also need to be considered:
- PCB thickness
- Proportion of Cu in the layers
- Single/double-sided assembly
- Product range
- Heating and cooling rates
The single and double wave profiles each indicate the recommended operating range, including the maximum
soldering temperature of 260°C. In practice, the maximum soldering temperature is quite often well below the above
maximum profile.
We reserve the right to make technical changes.
