1608620000

Product catalogue | Terminals | Tension clamp technology | Modular feed-through terminals | Standard form | 6 mm² General ordering data Order No. Part designation Version EAN Qty. Product notes Note, technical data Product description PT OKIECEx/ATEX rating data EU-type examination certificate Download, German Download English IECEx Certificate of Conformity Download ATEX voltage ATEX current ATEX conductor cross-section IECEx voltage IECEx current Voltage when using cross-connections Operating temperature range 1608620000 ZDU 6 Feed-through terminal, 6 mm², Tension clamp connection, Wemid, dark beige, TS 35 4008190207892 50 pc(s). Twin wire-end ferrules ZH 0.5 - ZH 2.5 can be used. Z-series standard ranges provide solutions for conductor cross-sections from 0.05 to 35 mm². Marking EN 60079-7 Marking ATEX Directive 94/9/EC KEMA97ATEX2521U KEMA97ATEX2521U_d.pdf KEMA97ATEX2521U_e.pdf IECEXULD05.0009U IECEXULD05.0009U_e.pdf 550 V 36 A 6 mm² 550 V 36 A CrossConnectionGuide.pdf Einsatztemperaturbereich siehe EGBaumusterprüfbescheinigung/IECEx-Certificate of Conformity Ex e II Ex II 2 G D Additional technical data Colour of insulating material Connection direction dark beige top -1- Product catalogue | Terminals | Tension clamp technology | Modular feed-through terminals | Standard form | 6 mm² Additional technical data End plate required Explosion-tested version "Ex e" Installation advice Insulating material Levels cross-connected internally No. of identical terminals No. of levels No. of terminal strips per level Open sides Operating temperature range Product family Type of connection Type of mounting UL 94 flammability rating of insulation material Version Yes Yes TS 35 Wemid No 1 1 2 right - 50 °C, + 120 °C Z-series Clamped Snap-on V-0 Feed-through terminal CSA rating data Voltage (CSA) CSA current Min. cross-section (CSA) Max. cross-section (CSA) 600 V 50 A AWG 20 AWG 8 Conductors for clamping (additional connection) Flexible with ferrule, min. (DIN 46228 pt 1) Flexible with ferrule, max. (DIN 46228 pt 1) 0.5 mm² 6 mm² Conductors for clamping (rated connection) Clamping range, min. Clamping range, max. Type of connection 2nd type of connection Connection direction No. of connections Stripping length Blade size Gauge to IEC 60947-1 Solid, min. Solid, max. Flexible, min. Flexible, max. Flexible with ferrule, min. (DIN 46228/1) Flexible with ferrule, max. (DIN 46228/1) Flexible, min., ferrule with plastic collar (DIN 46228 pt 4) Flexible, max., ferrule with plastic collar (DIN 46228 pt 4) Twin wire-end ferrule, min. Twin wire end ferrule, max. AWG conductor size, min. AWG conductor size, max. 0.22 mm² 10 mm² Tension clamp connection clamped top 2 13 mm 1.0 x 5.5 mm A5 0.5 mm² 10 mm² 0.5 mm² 10 mm² 0.5 mm² 6 mm² 0.5 mm² 6 mm² 0.5 mm² 2.5 mm² AWG 22 AWG 8 -2- Product catalogue | Terminals | Tension clamp technology | Modular feed-through terminals | Standard form | 6 mm² Conductors for clamping (rated connection) AWG conductor size, min. AWG conductor size, max. 0.33 mm² 8.37 mm² Dimensions Width Height of lowest version Length TS 35 offset 8.1 mm 45.6 mm 65 mm 32.5 mm Rating data Rated cross-section Rated voltage Rated impulse voltage Rated current Standards Current with max. conductor Pollution severity 6 mm² 800 V 8 kV 41 A IEC 60947-7-1 57 A 3 UL rating data Voltage (UL) Current (UL) Min. cross-section (UL) Max. cross-section (UL) 600 V 50 A AWG 22 AWG 8 Approvals Approvals institutes Downloads STEP 1608620000_20790_ZDU_6_STP.stp Classifications eClass 4.1 eClass 5.0 eClass 5.1 27-14-11-20 27-14-11-20 27-14-11-20 Similar products Order No. Part designation Version -3- Product catalogue | Terminals | Tension clamp technology | Modular feed-through terminals | Standard form | 6 mm² 1608630000 ZDU 6 BL 1636820000 ZDU 6 OR 1631430000 ZDU 6/10 7907410000 ZDU 6/3AN 7907420000 ZDU 6/3AN BL Feed-through terminal, 6 mm², Tension clamp connection, Wemid, blue, TS 35 Feed-through terminal, 6 mm², Tension clamp connection, Wemid, Orange, TS 35 Feed-through terminal, 6 mm², Tension clamp connection, Wemid, dark beige, TS 35 Feed-through terminal, 6 mm², Tension clamp connection, Wemid, dark beige, TS 35 Feed-through terminal, 6 mm², Tension clamp connection, Wemid, blue, TS 35 -4-