1608650000

Product catalogue | Terminals | Tension clamp technology | Modular PE conductor terminals | Standard form | 2.5 mm² General ordering data Order No. Part designation Version EAN Qty. Product notes Product description PT OKIECEx/ATEX rating data EU-type examination certificate Download, German Download English IECEx Certificate of Conformity Download ATEX conductor cross-section IECEx conductor cross-section Voltage when using cross-connections Operating temperature range 1608650000 ZPE 2.5/3AN Earth terminal, 2.5 mm², Tension clamp connection, Wemid, green/yellow, TS 35 4008190076559 100 pc(s). Z-series standard ranges provide solutions for conductor cross-sections from 0.05 to 35 mm². Marking EN 60079-7 Marking ATEX Directive 94/9/EC KEMA97ATEX2521U KEMA97ATEX2521U_d.pdf KEMA97ATEX2521U_e.pdf IECEXULD05.0009U IECEXULD05.0009U_e.pdf 2.5 mm² 2.5 mm² CrossConnectionGuide.pdf Einsatztemperaturbereich siehe EGBaumusterprüfbescheinigung/IECEx-Certificate of Conformity Ex e II Ex II 2 G D Additional technical data Colour of insulating material Connection direction End plate required Explosion-tested version "Ex e" Installation advice Insulating material Levels cross-connected internally green/yellow top Yes Yes TS 35 Wemid No -1- Product catalogue | Terminals | Tension clamp technology | Modular PE conductor terminals | Standard form | 2.5 mm² Additional technical data No. of identical terminals No. of levels No. of terminal strips per level Open sides Operating temperature range Product family Type of connection Type of mounting UL 94 flammability rating of insulation material Version 1 1 3 right - 50 °C, + 120 °C Z-series Clamped Snap-on V-0 PE terminal CSA rating data Min. cross-section (CSA) Max. cross-section (CSA) AWG 26 AWG 12 Conductors for clamping (additional connection) Flexible with ferrule, min. (DIN 46228 pt 1) Flexible with ferrule, max. (DIN 46228 pt 1) 0.5 mm² 2.5 mm² Conductors for clamping (rated connection) Clamping range, min. Clamping range, max. Type of connection 2nd type of connection Connection direction No. of connections Stripping length Blade size Gauge to IEC 60947-1 Solid, min. Solid, max. Flexible, min. Flexible, max. Flexible with ferrule, min. (DIN 46228/1) Flexible with ferrule, max. (DIN 46228/1) Flexible, min., ferrule with plastic collar (DIN 46228 pt 4) Flexible, max., ferrule with plastic collar (DIN 46228 pt 4) AWG conductor size, min. AWG conductor size, max. AWG conductor size, min. AWG conductor size, max. Dimensions Width Height of lowest version Length TS 35 offset 0.05 mm² 4 mm² Tension clamp connection clamped top 3 10 mm 0.6 x 3.5 mm A3 0.5 mm² 4 mm² 0.5 mm² 4 mm² 0.5 mm² 2.5 mm² 0.5 mm² 2.5 mm² AWG 30 AWG 12 0.05 mm² 3.31 mm² 5.1 mm 39.5 mm 64.5 mm 32.5 mm -2- Product catalogue | Terminals | Tension clamp technology | Modular PE conductor terminals | Standard form | 2.5 mm² PE rating data PEN function Pollution severity Rated cross-section Rated impulse withstand voltage to adjacent terminal Rated short-time current Rated voltage for adjacent terminal Standards UL rating data Min. cross-section (UL) Max. cross-section (UL) No 3 2.5 mm² 8 kV 300 A (2.5 mm²) 800 V IEC 60947-7-2 AWG 30 AWG 12 Approvals Approvals institutes Downloads STEP 1608650000_20784_ZPE_2.5-3AN_STP.stp Classifications eClass 4.1 eClass 5.0 eClass 5.1 27-14-03-05 27-14-03-05 27-14-03-05 Similar products Order No. 1690000000 Part designation ZDK 2.5PE 1608640000 ZPE 2.5 1608660000 ZPE 2.5/4AN Version Earth terminal, 2.5 mm², Tension clamp connection, Wemid, green/ yellow, TS 35 Earth terminal, 2.5 mm², Tension clamp connection, Wemid, green/ yellow, TS 35 Earth terminal, 2.5 mm², Tension clamp connection, Wemid, green/ yellow, TS 35 -3-