1616410000

    Data sheet Z-series ZSI 2.5/LD 250AC Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com     Spring connection with tension clamp Technology Tension clamp technology is a universal contact system for all common conductor connection types. Its fantastic level of flexibility makes the tension clamp a profitable alternative connection. General ordering data   Type Order No. Version GTIN (EAN) Qty.   ZSI 2.5/LD 250AC 1616410000 Z-series, Fuse terminal, Rated cross-section: 2.5 mm², Tension clamp connection, Dark Beige, Direct mounting 4008190196844 50 pc(s). Creation date November 9, 2018 9:58:06 PM CET   Catalogue status 11.10.2018 / We reserve the right to make technical changes. 1     Data sheet Z-series ZSI 2.5/LD 250AC   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions and weights   Width Height Depth Depth including DIN rail   7.9 mm 79.5 mm 73 mm 74 mm         Width (inches) Height (inches) Depth (inches) Net weight 0.311 inch 3.13 inch 2.874 inch 19.81 g -50 °C   Continuous operating temp., max. 120 °C Wemid V-0     Colour   Dark Beige Temperatures   Continuous operating temp., min.   Material data   Material UL 94 flammability rating   System specifications   Version Number of potentials No. of clamping points per level Levels cross-connected internally Mounting rail PE function   Tension-clamp connection,   Fuse cartridge, with LED, for plug-in crossconnector, One end without connector   1   2   No   TS 35   No End cover plate required Number of levels Number of potentials per tier PE connection N-function PEN function Yes 1 1 No No No Additional technical data   Explosion-tested version Number of similar terminals Type of mounting   No 1 Snap-on       Installation advice Open sides   Direct mounting right 200039-1152892 26 AWG     Wire cross section max. (CSA)   12 AWG     CSA rating data   Certificate No. (CSA) Wire cross section min. (CSA)   Conductors for clamping (additional connection)   Conductor cross-section, flexible plus plastic collar DIN 46228/1, further connection, max.   2.5 mm² Creation date November 9, 2018 9:58:06 PM CET   Catalogue status 11.10.2018 / We reserve the right to make technical changes. 2     Data sheet Z-series ZSI 2.5/LD 250AC   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Conductors for clamping (rated connection)   Blade size Clamping range, min. Gauge to IEC 60947-1 Stripping length Wire connection cross section AWG, max. Wire connection cross section, finely stranded, max. Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min. Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min. Wire connection cross-section, solid core, max.   0.6 x 3.5 mm 0.13 mm² A3 10 mm AWG 12 4 mm² 0.5 mm² 0.5 mm²                 Clamping range, max. Connection direction Number of connections Type of connection Wire connection cross section AWG, min. Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max. Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max. Wire connection cross-section, finely stranded, min. 4 mm² Inclined / angled 2 Tension clamp connection AWG 26 2.5 mm² 2.5 mm² 0.5 mm²   Wire connection cross-section, solid core, min. 6.3 A 140 V     Operating voltage for display, max. Type of voltage for indicator 250 V AC/DC G-Si. 5 x 20 red LED       6.3 A Pivoting   Current Fuse holder (cartridge holder) Power loss for overload and short-circuit protection for a composite arrangement Power loss for short-circuit protection only for a composite arrangement Type of voltage for indicator         Rated voltage Rated current Standards Rated impulse withstand voltage 250 V 6.3 A IEC 60947-7-3           Conductor size Factory wiring max. (UR) 12 AWG Conductor size Field wiring max. (UR) 12 AWG   4 mm² 0.5 mm² Display element   Current Operating voltage for display, min.   Fuse terminals   Cartridge fuse Display Operating voltage, max. 250 V Power loss for overload and short-circuit protection for an individual arrangement 2.5 W at 2.5 A @ 27°C Power loss for short-circuit protection only for an individual arrangement 4.0 W at 6.3 A @ 52°C     1.6 W at 6.3 A @ 41°C 2.5 W at 6.3 A @ 55°C AC/DC Rating data   Rated cross-section Rated voltage to adjoining terminal Current at maximum wires Volume resistance according to IEC 60947-7-x Pollution severity   2.5 mm² 500 V 6.3 A 1.33 mΩ 3 6 kV UL rating data   Certificate No. (UR) E60693 Conductor size Factory wiring min. (UR) 26 AWG Conductor size Field wiring min. (UR) 26 AWG   Creation date November 9, 2018 9:58:06 PM CET   Catalogue status 11.10.2018 / We reserve the right to make technical changes. 3     Data sheet Z-series ZSI 2.5/LD 250AC   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Classifications   ETIM 3.0 ETIM 5.0 UNSPSC eClass 6.2 eClass 8.1 eClass 9.1   EC000899 EC000899 30-21-18-11 27-14-11-16 27-14-11-16 27-14-11-16             ETIM 4.0 ETIM 6.0 eClass 5.1 eClass 7.1 eClass 9.0   EC000899 EC000899 27-14-11-16 27-14-11-16 27-14-11-16 Product information   Descriptive text ordering data Descriptive text technical data Instructions for accessories   The rated voltage for cartridge fuse holders is 250 V and the rated impulse voltage 4 kV. Max. power loss (1.6 W) at the cartridge fuse limits the rated current. Status display using a bi-directional LED. Approvals   Approvals ROHS   Conform Downloads   Approval/Certificate/Document of Conformity Brochure/Catalogue Engineering Data Engineering Data User Documentation   DE_PT1103_20160418_1442_ISSUE01.pdf CAT 1 TERM 16/17 EN EPLAN, WSCAD, Zuken E3.S STEP Beipackzettel_SAKS_GL_LD.pdf Safety note   Safety notice   Safety Information Creation date November 9, 2018 9:58:06 PM CET   Catalogue status 11.10.2018 / We reserve the right to make technical changes. 4