1626950000

    Data sheet... Z-series ZDU 2.5/10 Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com     Terminal blocks in tension clamp system and the Z Series are specially customised to the customers' requirements. Less space, spacious labelling area, integrated test point, cross-connection functionality within the Z Series and another family of terminals by Weidmüller. Z-Series terminals have a large clamping range and one or two cross-connection slots. Plug-in standard cross-connections enable potentials to be distributed over any number of terminals. General ordering data   Order No. Type Version GTIN (EAN) Qty.   1626950000 ZDU 2.5/10 Z-series, Feed-through terminal, Rated crosssection: Tension clamp connection, Wemid, Dark Beige 4008190206345 10 pc(s). Creation date June 5, 2013 3:57:20 PM CEST   Catalogue status 26.04.2013 / We reserve the right to make technical changes. 1     Data sheet... Z-series ZDU 2.5/10   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions and weights   Length Height Net weight   59.5 mm 38.5 mm 75.9 g       Width Height of lowest version   -50 °C     Storage temperature Continuous operating temp., max.   KEMA97ATEX2521U KEMA97ATEX2521U_e.pdf  IECEXULD05.0009U_e.pdf    21 A   550 V   2.5 mm² For operating temperature   range see EC Design Test Certificate / IEC ExCertificate of Conformity ATEX certificate Certificate No. (IECEX) Max. voltage (ATEX) Wire cross section max. (ATEX) Current (IECEX) Voltage, cross-connection Marking ATEX Directive 94/9/EC   Yes   right Tension-clamp connection   Number of similar terminals Type of mounting   10 Snap-on         Voltage size B (CSA) Current size B (CSA) Wire cross section max. (CSA)   600 V 27 A 12 AWG   Conductor cross-section, flexible plus plastic collar DIN 46228/1, further connection, max. 51 mm 39.5 mm Temperatures   Operating temperature Continuous operating temp., min.   120 °C Rated data IECEx/ATEX   Certificate No. (ATEX) ATEX certificate IEC Ex certificate Current (ATEX) Max. voltage (IECEX) Wire cross section max. (IECEX) Operating temperature range   KEMA97ATEX2521U_d.pdf IECEXULD05.0009U 550 V 2.5 mm² 20 A CrossConnectionGuide.pdf II 2 G D Additional technical data   Explosion-tested version Open sides Version   CSA ratings data   Certificate No. (CSA) Voltage size C (CSA) Current size C (CSA) Wire cross section min. (CSA)   200039-1152892 600 V 27 A 26 AWG Clampable wires (additional connection)   Conductor cross-section, flexible plus plastic collar DIN 46228/1, further connection, min.   0.5 mm² 2.5 mm² Creation date June 5, 2013 3:57:20 PM CEST   Catalogue status 26.04.2013 / We reserve the right to make technical changes. 2     Data sheet... Z-series ZDU 2.5/10   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Clampable wires (rated connection)   Type of connection Tension clamp connection Connection direction top Clamping range, rated connection, min. 0.05 mm² Gauge to IEC 60947-1 A3 Wire connection cross section, solid core max. rated connection 4 mm² Wire connection cross-section, finely stranded, min. 0.5 mm² Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, rated connection, max. 2.5 mm² Wire connection cross-section, finely stranded with wire-end ferrules and plastic collars DIN 46228/4, rated connection, max. 2.5 mm² Wire connection cross section AWG, max. AWG 12                 Stripping length Number of connections Clamping range, rated connection, max. Wire connection cross section, solid core, max. rated connection Wire connection cross section, finely stranded, max. Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, rated connection, min. Cross-section for connected conductor, finely stranded with wire-end ferrules and plastic collars DIN 46228/4, rated connection, min. Wire connection cross section AWG, min. 10 mm 2 4 mm² 1 mm² 4 mm² 0.5 mm² 0.5 mm² AWG 30     800 V 24 A IEC 60947-7-1       Rated impulse withstand voltage Current at maximum wires Pollution severity 8 kV 31 A 3 E60693VOL1SEC38 600 V 25 A 30 AWG         Voltage size B (UR) Current size B (UR) Conductor size Factory wiring max. (UR) Conductor size Field wiring max. (UR) 600 V 25 A 12 AWG 12 AWG Wemid Beige     Material UL 94 flammability rating Wemid V-0 Z-series top 2 No Yes           Type of connection Number of levels No. of clamping points per level Mounting rail   Tension clamp connection 1 2 TS 35 EC000897 30-21-18-11 27-14-11-20 27-14-11-20         ETIM 3.0 eClass 4.1 eClass 6.2   EC000897 27-14-11-20 27-14-11-20   Rated data   Rated voltage Rated current Standards   UL ratings data   Certificate No. (UR) Voltage size C (UR) Current size C (UR) Conductor size Factory wiring min. (UR)   Material data   Insulating material Colour   System specifications   Product family Connection direction Number of connections Levels cross-connected internally End cover plate required   Classifications   ETIM 2.0 UNSPSC eClass 5.1 eClass 7.1   Creation date June 5, 2013 3:57:20 PM CEST   Catalogue status 26.04.2013 / We reserve the right to make technical changes. 3     Data sheet... Z-series ZDU 2.5/10   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Approvals   Approvals ROHS   Conform Creation date June 5, 2013 3:57:20 PM CEST   Catalogue status 26.04.2013 / We reserve the right to make technical changes. 4