1652030000

Product catalogue | Terminals | Tension clamp technology | Modular initiator/actuator terminals | ZIA 1.5/4 L... base element 4-wire General ordering data Order No. Part designation Version EAN Qty. Product notes Note, ordering data 1652030000 ZIA 1.5/4L-PE Initiator/actuator terminal, 1.5 mm², Tension clamp connection, Wemid, green, TS 35 4008190401689 20 pc(s). Product description ZVL 1.5 O.QV = distribution strip without internal bridge for park position Bi-directional LED in ZIA 1.5/4L-1/LD (1652020000) The modular distribution strip system Additional technical data Colour of insulating material Connection direction End plate required Explosion-tested version "Ex e" Installation advice Insulating material Levels cross-connected internally No. of levels Open sides Operating temperature range Product family Type of connection Type of mounting UL 94 flammability rating of insulation material Version green top Yes No TS 35 Wemid No 1 right - 50 °C, + 120 °C Z-series Tension clamp connection Snap-on V-0 ZIK-ZAK-System CSA rating data Voltage (CSA) CSA current 300 V 10 A Note, technical data -1- Product catalogue | Terminals | Tension clamp technology | Modular initiator/actuator terminals | ZIA 1.5/4 L... base element 4-wire CSA rating data Min. cross-section (CSA) Max. cross-section (CSA) AWG 26 AWG 14 Conductors for clamping (additional connection) Flexible with ferrule, min. (DIN 46228 pt 1) Flexible with ferrule, max. (DIN 46228 pt 1) 0.5 mm² 1.5 mm² Conductors for clamping (rated connection) Clamping range, min. Clamping range, max. Type of connection Connection direction No. of connections Stripping length Blade size Gauge to IEC 60947-1 Solid, min. Solid, max. Flexible, min. Flexible, max. Flexible with ferrule, min. (DIN 46228/1) Flexible with ferrule, max. (DIN 46228/1) Flexible, min., ferrule with plastic collar (DIN 46228 pt 4) Flexible, max., ferrule with plastic collar (DIN 46228 pt 4) Twin wire-end ferrule, min. Twin wire end ferrule, max. AWG conductor size, min. AWG conductor size, max. 0.13 mm² 2.5 mm² Tension clamp connection top 2 8 mm 0.6 x 3.5 mm A1 0.5 mm² 2.5 mm² 0.5 mm² 2.5 mm² 0.5 mm² 1.5 mm² 0.5 mm² 1.5 mm² 0.5 mm² 0.75 mm² AWG 26 AWG 14 Dimensions Width Height of lowest version Length TS 35 offset 5.08 mm 46 mm 81.5 mm 45.5 mm Rating data Rated cross-section Rated voltage Rated impulse voltage Rated current Standards Pollution severity 1.5 mm² 250 V 4 kV 17.5 A IEC 60947-7-1 3 UL rating data Voltage (UL) Current (UL) Min. cross-section (UL) Max. cross-section (UL) 300 V 10 A AWG 26 AWG 14 -2- Product catalogue | Terminals | Tension clamp technology | Modular initiator/actuator terminals | ZIA 1.5/4 L... base element 4-wire UL rating data Approvals Approvals institutes Downloads STEP 1652030000_22245_ZIA_1.5-4L-PE_STP.stp Classifications eClass 4.1 eClass 5.0 eClass 5.1 27-14-11-28 27-14-11-28 27-14-11-28 Similar products Order No. 1652010000 Part designation ZIA 1.5/4L-1S 1652020000 ZIA 1.5/4L-1S/LD Version Initiator/actuator terminal, 1.5 mm², Tension clamp connection, Wemid, dark beige, TS 35 Initiator/actuator terminal, 1.5 mm², Tension clamp connection, Wemid, dark beige, TS 35 -3-