1683590000

Product catalogue | Terminals | Tension clamp technology | Modular feed-through terminals | Standard form | 4 mm² General ordering data Order No. Part designation Version EAN Qty. Product notes Note, technical data Product description PT OKIECEx/ATEX rating data EU-type examination certificate Download, German Download English IECEx Certificate of Conformity Download ATEX voltage ATEX current ATEX conductor cross-section IECEx voltage IECEx current IECEx conductor cross-section Voltage when using cross-connections Operating temperature range 1683590000 ZDU 4 GE Feed-through terminal, 4 mm², Tension clamp connection, Wemid, yellow, TS 35 4008190476564 100 pc(s). When using twin ferrules, the rated voltage is 690 V. Z-series standard ranges provide solutions for conductor cross-sections from 0.05 to 35 mm². Marking EN 60079-7 Marking ATEX Directive 94/9/EC KEMA97ATEX2521U KEMA97ATEX2521U_d.pdf KEMA97ATEX2521U_e.pdf IECEXULD05.0009U IECEXULD05.0009U_e.pdf 550 V 28 A 4 mm² 550 V 28 A 4 mm² CrossConnectionGuide.pdf Einsatztemperaturbereich siehe EGBaumusterprüfbescheinigung/IECEx-Certificate of Conformity Ex e II Ex II 2 G D Additional technical data Colour of insulating material Connection direction End plate required Explosion-tested version "Ex e" Installation advice Insulating material Levels cross-connected internally No. of identical terminals No. of levels No. of terminal strips per level Open sides Operating temperature range Product family Type of connection Type of mounting UL 94 flammability rating of insulation material Version yellow top Yes Yes TS 35 Wemid No 1 1 2 right - 50 °C, + 120 °C Z-series Clamped Snap-on V-0 Feed-through terminal -1- Product catalogue | Terminals | Tension clamp technology | Modular feed-through terminals | Standard form | 4 mm² CSA rating data Voltage (CSA) CSA current Min. cross-section (CSA) Max. cross-section (CSA) 600 V 35 A AWG 26 AWG 10 Conductors for clamping (additional connection) Flexible with ferrule, min. (DIN 46228 pt 1) Flexible with ferrule, max. (DIN 46228 pt 1) 0.5 mm² 4 mm² Conductors for clamping (rated connection) Clamping range, min. Clamping range, max. Type of connection 2nd type of connection Connection direction No. of connections Stripping length Blade size Gauge to IEC 60947-1 Solid, min. Solid, max. Stranded, min. Stranded, max. Flexible, min. Flexible, max. Flexible with ferrule, min. (DIN 46228/1) Flexible with ferrule, max. (DIN 46228/1) Flexible, min., ferrule with plastic collar (DIN 46228 pt 4) Flexible, max., ferrule with plastic collar (DIN 46228 pt 4) Twin wire-end ferrule, min. Twin wire end ferrule, max. AWG conductor size, min. AWG conductor size, max. AWG conductor size, min. AWG conductor size, max. 0.13 mm² 6 mm² Tension clamp connection clamped top 2 12 mm 0.6 x 3.5 mm A4 0.5 mm² 6 mm² 0.5 mm² 6 mm² 0.5 mm² 6 mm² 0.5 mm² 4 mm² 0.5 mm² 4 mm² 0.5 mm² 1.5 mm² AWG 26 AWG 10 0.13 mm² 5.26 mm² Dimensions Width Height of lowest version Length TS 35 offset 6.1 mm 43.5 mm 62 mm 29.5 mm Rating data Rated cross-section Rated voltage Rated impulse voltage Rated current Standards 4 mm² 800 V 8 kV 32 A IEC 60947-7-1 -2- Product catalogue | Terminals | Tension clamp technology | Modular feed-through terminals | Standard form | 4 mm² Rating data Current with max. conductor Pollution severity 41 A 3 UL rating data Voltage (UL) Current (UL) Min. cross-section (UL) Max. cross-section (UL) 600 V 33 A AWG 26 AWG 10 Approvals Approvals institutes Classifications eClass 4.1 eClass 5.0 eClass 5.1 27-14-11-20 27-14-11-20 27-14-11-20 Similar products Order No. 1632050000 Part designation ZDU 4 1632060000 ZDU 4 BL 1683630000 ZDU 4 GR 1636830000 ZDU 4 OR 1683580000 ZDU 4 RT 1683650000 ZDU 4 SW 1683640000 ZDU 4 WS 1651900000 ZDU 4/10/BEZ 7904180000 ZDU 4/3AN Version Feed-through terminal, 4 mm², Tension clamp connection, Wemid, dark beige, TS 35 Feed-through terminal, 4 mm², Tension clamp connection, Wemid, blue, TS 35 Feed-through terminal, 4 mm², Tension clamp connection, Wemid, grey, TS 35 Feed-through terminal, 4 mm², Tension clamp connection, Wemid, Orange, TS 35 Feed-through terminal, 4 mm², Tension clamp connection, Wemid, red, TS 35 Feed-through terminal, 4 mm², Tension clamp connection, Wemid, black, TS 35 Feed-through terminal, 4 mm², Tension clamp connection, Wemid, white, TS 35 Feed-through terminal, 4 mm², Tension clamp connection, Wemid, dark beige, TS 35 Feed-through terminal, 4 mm², Tension clamp connection, Wemid, dark beige, TS 35 -3- Product catalogue | Terminals | Tension clamp technology | Modular feed-through terminals | Standard form | 4 mm² 7904190000 ZDU 4/3AN BL 7904290000 ZDU 4/4AN 7904300000 ZDU 4/4AN BL Feed-through terminal, 4 mm², Tension clamp connection, Wemid, blue, TS 35 Feed-through terminal, 4 mm², Tension clamp connection, Wemid, dark beige, TS 35 Feed-through terminal, 4 mm², Tension clamp connection, Wemid, blue, TS 35 -4-