1690010000

Product catalogue | Terminals | Tension clamp technology | Modular terminals with electronic components | 2.5 mm² | ZDK 2.5/1.5LD 1...4 LED circuit General ordering data Order No. Part designation Version EAN Qty. Product notes Note, ordering data Note, technical data Product description 1690010000 ZDK 2.5/LD RT/1 Special terminal, special connections, 2.5 mm², Tension clamp connection, Wemid, dark beige, TS 35 4008190898274 50 pc(s). Current of continuous busbar = 10 A 2.5 mm² flexible conductors with wire-end ferrules are crimped with the Weidmüller PZ 6/5 crimping tool. Z-series standard ranges provide solutions for conductor cross-sections from 0.05 to 35 mm². Additional technical data Colour of insulating material Connection direction Electronic component End plate required Explosion-tested version "Ex e" Installation advice Insulating material Levels cross-connected internally No. of levels No. of terminal strips per level Open sides Operating temperature range Product family Type of connection Type of mounting UL 94 flammability rating of insulation material Version dark beige top red LED Yes Yes TS 35 Wemid No 2 2 right - 50 °C, + 120 °C Z-series Plugged Snap-on V-0 Terminal with LED CSA rating data Voltage (CSA) CSA current Min. cross-section (CSA) Max. cross-section (CSA) 24 V 10 A AWG 26 AWG 12 Conductors for clamping (additional connection) Flexible with ferrule, min. (DIN 46228 pt 1) Flexible with ferrule, max. (DIN 46228 pt 1) 0.5 mm² 2.5 mm² Conductors for clamping (rated connection) Clamping range, min. Clamping range, max. Type of connection 2nd type of connection 0.05 mm² 2.5 mm² Tension clamp connection clamped -1- Product catalogue | Terminals | Tension clamp technology | Modular terminals with electronic components | 2.5 mm² | ZDK 2.5/1.5LD 1...4 LED circuit Conductors for clamping (rated connection) Connection direction No. of connections Stripping length Blade size Gauge to IEC 60947-1 Solid, min. Solid, max. Flexible, min. Flexible, max. Flexible with ferrule, min. (DIN 46228/1) Flexible with ferrule, max. (DIN 46228/1) Flexible, min., ferrule with plastic collar (DIN 46228 pt 4) Flexible, max., ferrule with plastic collar (DIN 46228 pt 4) AWG conductor size, min. AWG conductor size, max. AWG conductor size, min. AWG conductor size, max. top 4 10 mm 0.6 x 3.5 mm A2 0.5 mm² 2.5 mm² 0.5 mm² 2.5 mm² 0.5 mm² 1.5 mm² 1.5 mm² 1.5 mm² AWG 26 AWG 12 0.05 mm² 2.5 mm² Dimensions Width Height of lowest version Length TS 35 offset 5.1 mm 54 mm 79.1 mm 39 mm Display element Current Indicator element Operating voltage for display, max. Operating voltage for display, min. Type of voltage for indicator 0.05 A red 24 V 10 V DC Fuse terminals Current Display Type of voltage for indicator 0.05 A LED DC Rating data Rated cross-section Rated voltage Rated current Standards Pollution severity 2.5 mm² 24 V 10 A IEC 60947-7-1 3 UL rating data Voltage (UL) Current (UL) Min. cross-section (UL) Max. cross-section (UL) 24 V 10 A AWG 30 AWG 12 -2- Product catalogue | Terminals | Tension clamp technology | Modular terminals with electronic components | 2.5 mm² | ZDK 2.5/1.5LD 1...4 LED circuit Approvals Approvals institutes Classifications eClass 4.1 eClass 5.0 eClass 5.1 27-14-11-31 27-14-11-31 27-14-11-31 Similar products Order No. 1693940000 Part designation ZDK 2.5/LD RT/2 Version Special terminal, special connections, 2.5 mm², Tension clamp connection, Wemid, dark beige, TS 35 -3-