Product catalogue | Terminals | Tension clamp technology | Modular terminals with electronic components | 2.5 mm² |
ZDK 2.5/1.5/D/1...6 diode circuit
General ordering data
Order No.
Part designation
Version
EAN
Qty.
Product notes
Note, ordering data
Note, technical data
Product description
Additional technical data
Colour of insulating material
Connection direction
Electronic component
End plate required
Explosion-tested version "Ex e"
Installation advice
Insulating material
Levels cross-connected internally
No. of levels
No. of terminal strips per level
Open sides
Operating temperature range
Product family
Type of connection
Type of mounting
UL 94 flammability rating of insulation material
1690050000
ZDK 2.5/D/5
Component terminal, 2.5 mm², Tension clamp
connection, Wemid, dark beige, TS 35
4008190898885
50 pc(s).
Soldered diode: Type 1N 4007, reverse voltage
1000V, current 1 A; current of continuous busbar =
10 A
2.5 mm² flexible conductors with wire end ferrules
are crimped with the Weidmüller PZ 6/5 crimping
tool.
Z-series standard ranges provide solutions for
conductor cross-sections from 0.05 to 35 mm².
dark beige
top
Diode
Yes
Yes
TS 35
Wemid
No
2
2
right
- 50 °C, + 120 °C
Z-series
Plugged
Snap-on
V-0
-1-
Product catalogue | Terminals | Tension clamp technology | Modular terminals with electronic components | 2.5 mm² |
ZDK 2.5/1.5/D/1...6 diode circuit
Additional technical data
Version
Feed-through terminal with electronic components
CSA rating data
Voltage (CSA)
CSA current
Min. cross-section (CSA)
Max. cross-section (CSA)
300 V
10 A
AWG 26
AWG 12
Conductors for clamping (additional
connection)
Type of connection
Flexible with ferrule, min. (DIN 46228 pt 1)
Flexible with ferrule, max. (DIN 46228 pt 1)
Tension clamp connection
0.5 mm²
2.5 mm²
Conductors for clamping (rated connection)
Clamping range, min.
Clamping range, max.
Type of connection
2nd type of connection
Connection direction
No. of connections
Stripping length
Blade size
Gauge to IEC 60947-1
Solid, min.
Solid, max.
Flexible, min.
Flexible, max.
Flexible with ferrule, min. (DIN 46228/1)
Flexible with ferrule, max. (DIN 46228/1)
Flexible, min., ferrule with plastic collar (DIN
46228 pt 4)
Flexible, max., ferrule with plastic collar (DIN
46228 pt 4)
Twin wire-end ferrule, min.
Twin wire end ferrule, max.
AWG conductor size, min.
AWG conductor size, min.
AWG conductor size, max.
0.05 mm²
2.5 mm²
Tension clamp connection
clamped
top
4
10 mm
0.6 x 3.5 mm
A2
0.5 mm²
2.5 mm²
0.5 mm²
2.5 mm²
0.5 mm²
1.5 mm²
0.5 mm²
1.5 mm²
0.14 mm²
0.34 mm²
AWG 30
0.13 mm²
2.5 mm²
Dimensions
Width
Height of lowest version
Length
TS 35 offset
5.1 mm
54 mm
79.1 mm
39 mm
Rating data
Rated cross-section
Rated voltage
Rated impulse voltage
Rated current
2.5 mm²
500 V
6 kV
10 A
-2-
Product catalogue | Terminals | Tension clamp technology | Modular terminals with electronic components | 2.5 mm² |
ZDK 2.5/1.5/D/1...6 diode circuit
Rating data
Standards
Pollution severity
IEC 60947-7-1
3
UL rating data
Voltage (UL)
Current (UL)
Min. cross-section (UL)
Max. cross-section (UL)
300 V
10 A
AWG 30
AWG 14
Approvals
Approvals institutes
Downloads
STEP
1690050000_24219_ZDK_2.5-1.5-D-5_STP.stp
Classifications
eClass 4.1
eClass 5.0
eClass 5.1
27-14-11-27
27-14-11-27
27-14-11-27
Similar products
Order No.
1690020000
Part designation
ZDK 2.5/D/1
1690030000
ZDK 2.5/D/2
1690040000
ZDK 2.5/D/4
1690060000
ZDK 2.5/D/6
Version
Component terminal, 2.5 mm², Tension clamp connection, Wemid,
dark beige, TS 35
Component terminal, 2.5 mm², Tension clamp connection, Wemid,
dark beige, TS 35
Component terminal, 2.5 mm², Tension clamp connection, Wemid,
dark beige, TS 35
Component terminal, 2.5 mm², Tension clamp connection, Wemid,
dark beige, TS 35
-3-
