1704350000

    Data sheet Z-series ZDUB 2.5-2/2AN/DM Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com     Product image Spring connection with tension clamp Technology Tension clamp technology is a universal contact system for all common conductor connection types. Its fantastic level of flexibility makes the tension clamp a profitable alternative connection. General ordering data   Type Order No. Version GTIN (EAN) Qty.   ZDUB 2.5-2/2AN/DM 1704350000 Z-series, Feed-through terminal, Rated crosssection: 2.5 mm², Tension clamp connection, Dark Beige, Direct mounting 4008190948092 100 pc(s). Creation date November 15, 2018 9:22:12 PM CET   Catalogue status 09.11.2018 / We reserve the right to make technical changes. 1     Data sheet Z-series ZDUB 2.5-2/2AN/DM   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions and weights   Width Height Depth Net weight   5.1 mm 33.5 mm 24 mm 3.72 g         Width (inches) Height (inches) Depth (inches)   0.201 inch 1.319 inch 0.945 inch -50 °C   Continuous operating temp., max. 120 °C Wemid V-0     Colour   Dark Beige KEMA97ATEX2755U 550 V 2.5 mm² 21 A For operating temperature range see EC Design Test Certificate / IEC ExCertificate of Conformity II 2 G D           Certificate No. (IECEX) Current (ATEX) Max. voltage (IECEX) Wire cross section max. (IECEX) Marking EN 60079-7 IECEXKEM07.0061U 21 A 550 V 2.5 mm²     Temperatures   Continuous operating temp., min.   Material data   Material UL 94 flammability rating   Rating data IECEx/ATEX   Certificate No. (ATEX) Max. voltage (ATEX) Wire cross section max. (ATEX) Current (IECEX) Operating temperature range Ex 2014/34/EU label   Ex eb II C Gb System specifications   Version Number of levels Number of potentials per tier PE connection   Tension-clamp connection,   can only be bridged at the clamping point, One end without connector   1   1   No End cover plate required No. of clamping points per level Levels cross-connected internally Mounting rail Yes 2 No Mounting plate Additional technical data   Explosion-tested version Open sides   Yes right     Installation advice Type of mounting Direct mounting Direct mounting 12400-379 600 V 26 AWG       Current size C (CSA) Wire cross section max. (CSA)   25 A 12 AWG CSA rating data   Certificate No. (CSA) Voltage size C (CSA) Wire cross section min. (CSA)   Creation date November 15, 2018 9:22:12 PM CET   Catalogue status 09.11.2018 / We reserve the right to make technical changes. 2     Data sheet Z-series ZDUB 2.5-2/2AN/DM   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Conductors for clamping (rated connection)   Blade size Clamping range, min. Gauge to IEC 60947-1 Stripping length Wire connection cross section AWG, max. Wire connection cross section, finely stranded, max. Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min. Wire connection cross-section, solid core, max.   0.6 x 3.5 mm 0.13 mm² A2 10 mm AWG 12 2.5 mm² 0.5 mm²               Clamping range, max. Connection direction Number of connections Type of connection Wire connection cross section AWG, min. Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max. Wire connection cross-section, finely stranded, min. 4 mm² top 2 Tension clamp connection AWG 26 1.5 mm² 0.5 mm²   Wire connection cross-section, solid core, min. 17 mm     2.5 mm² 24 A         Rated voltage Current at maximum wires Volume resistance according to IEC 60947-7-x Pollution severity E60693 26 AWG 26 AWG 600 V         Conductor size Factory wiring max. (UR) 12 AWG Conductor size Field wiring max. (UR) 12 AWG Current size C (UR) 20 A   EC000897 EC000897 30-21-18-11 27-14-11-20 27-14-11-06 27-14-11-20             ETIM 4.0 ETIM 6.0 eClass 5.1 eClass 7.1 eClass 9.0   4 mm² 0.5 mm² Dimensions   TS 15 offset   Rating data   Rated cross-section Rated current Standards Rated impulse withstand voltage   IEC 60947-7-1 8 kV 800 V 30 A 1.33 mΩ 3 UL rating data   Certificate No. (UR) Conductor size Factory wiring min. (UR) Conductor size Field wiring min. (UR) Voltage size C (UR)   Classifications   ETIM 3.0 ETIM 5.0 UNSPSC eClass 6.2 eClass 8.1 eClass 9.1   EC000897 EC000897 27-14-11-20 27-14-11-20 27-14-11-06 Product information   Descriptive text technical data Instructions for accessories   Direct mounting The terminal blocks are cross-connected when using the ZQB 2.5 (1677120000). Creation date November 15, 2018 9:22:12 PM CET   Catalogue status 09.11.2018 / We reserve the right to make technical changes. 3     Data sheet Z-series ZDUB 2.5-2/2AN/DM   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Approvals   Approvals ROHS   Conform Downloads   Approval/Certificate/Document of Conformity Engineering Data Engineering Data User Documentation   Attestation of Conformity IECEx Certificate IECEx Certificate IECEx Certificate DE_PT1111_20160418_1310_ISSUE01.pdf EPLAN, WSCAD, Zuken E3.S STEP Beipackzettel_ZDUB.pdf Cross Connection Guide Safety note   Safety notice   Safety Information Creation date November 15, 2018 9:22:12 PM CET   Catalogue status 09.11.2018 / We reserve the right to make technical changes. 4     Data sheet Z-series ZDUB 2.5-2/2AN/DM   Drawings Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Creation date November 15, 2018 9:22:12 PM CET   Catalogue status 09.11.2018 / We reserve the right to make technical changes. 5