1739550000

Product catalogue | Terminals | Tension clamp technology | Modular installation terminals | Feed-through terminals for 10x3 busbar General ordering data Order No. Part designation Version EAN Qty. Product notes Note, ordering data Note, technical data Product description 1739550000 ZDU 10S BL Feed-through terminal, 10 mm², Clamping yoke connection, Wemid, blue, TS 35 4008190957018 25 pc(s). Spacing between mounting plates should be 200mm. The supply to the busbar is via a busbar connection (ZB 35, ZB 16 or ZF 4S). N-cross-connections with busbar system 10 x 3 mm. Additional technical data Colour of insulating material Connection direction End plate required Explosion-tested version "Ex e" Installation advice Insulating material Levels cross-connected internally No. of identical terminals No. of levels No. of terminal strips per level Open sides Operating temperature range Product family Type of connection Type of mounting UL 94 flammability rating of insulation material Version blue Inclined / angled Yes No TS 35 Wemid No 1 1 2 right - 50 °C, + 120 °C Z-series Tension clamp connection Snap-on V-0 Feed-through terminal CSA rating data Voltage (CSA) CSA current Min. cross-section (CSA) Max. cross-section (CSA) 300 V 55 A AWG 16 AWG 6 -1- Product catalogue | Terminals | Tension clamp technology | Modular installation terminals | Feed-through terminals for 10x3 busbar Conductors for clamping (additional connection) Flexible with ferrule, min. (DIN 46228 pt 1) Flexible with ferrule, max. (DIN 46228 pt 1) Conductors for clamping (rated connection) Clamping range, min. Clamping range, max. Type of connection Connection direction Stripping length Blade size Gauge to IEC 60947-1 Solid, min. Solid, max. Stranded, min. Stranded, max. Flexible, min. Flexible, max. Flexible with ferrule, min. (DIN 46228/1) Flexible with ferrule, max. (DIN 46228/1) Flexible, min., ferrule with plastic collar (DIN 46228 pt 4) Flexible, max., ferrule with plastic collar (DIN 46228 pt 4) AWG conductor size, min. AWG conductor size, max. 1.5 mm² 10 mm² 1.3 mm² 16 mm² Clamping yoke connection Inclined / angled 18 mm 1.0 x 5.5 mm A6 1.5 mm² 16 mm² 1.5 mm² 16 mm² 1.5 mm² 10 mm² 1.5 mm² 10 mm² 1.5 mm² 10 mm² AWG 16 AWG 6 Dimensions Width Height of lowest version Length TS 35 offset 10 mm 48.5 mm 86.5 mm 38 mm Distribution terminals No. of potentials 1 N-conductor disconnect terminal For N-busbar 3 x 10 mm Rating data Rated cross-section Rated voltage Rated impulse voltage Rated current Standards Current with max. conductor Pollution severity 10 mm² 400 V 6 kV 57 A IEC 60947-7-1 76 A 3 UL rating data Voltage (UL) Current (UL) 300 V 60 A -2- Product catalogue | Terminals | Tension clamp technology | Modular installation terminals | Feed-through terminals for 10x3 busbar UL rating data Min. cross-section (UL) Max. cross-section (UL) AWG 16 AWG 6 Approvals Approvals institutes Classifications eClass 4.1 eClass 5.0 eClass 5.1 27-14-11-20 27-14-11-20 27-14-11-20 Similar products Order No. 1808010000 Part designation ZDU 2.5 S 1808020000 ZDU 2.5 S BL 1808360000 ZDU 4 S 1808370000 ZDU 4 S BL 1808230000 ZDU 6 S 1808240000 ZDU 6 S BL 1739540000 ZDU 10S 1739580000 ZDU 16S 1739590000 ZDU 16S BL Version Feed-through terminal, 2.5 mm², Tension clamp connection, Wemid, dark beige, TS 35 Feed-through terminal, 2.5 mm², Tension clamp connection, Wemid, blue, TS 35 Feed-through terminal, 4 mm², Tension clamp connection, Wemid, dark beige, TS 35 Feed-through terminal, 4 mm², Tension clamp connection, Wemid, blue, TS 35 Feed-through terminal, 6 mm², Tension clamp connection, Wemid, dark beige, TS 35 Feed-through terminal, 6 mm², Tension clamp connection, Wemid, blue, TS 35 Feed-through terminal, 10 mm², Clamping yoke connection, Wemid, dark beige, TS 35 Feed-through terminal, 16 mm², Tension clamp connection, Wemid, dark beige, TS 35 Feed-through terminal, 16 mm², Tension clamp connection, Wemid, blue, TS 35 -3-