1739570000

Product catalogue | Terminals | Tension clamp technology | Modular installation terminals | Modular PE conductor terminals General ordering data Order No. Part designation Version EAN Qty. Product notes Note, ordering data Note, technical data Product description Additional technical data Colour of insulating material Connection direction End plate required Explosion-tested version "Ex e" Installation advice Insulating material Levels cross-connected internally No. of levels No. of terminal strips per level Open sides Operating temperature range Product family Type of connection Type of mounting UL 94 flammability rating of insulation material Version 1739570000 ZPE 10S Feed-through terminal, 10 mm², Clamping yoke connection, Wemid, green, TS 35 4008190957032 25 pc(s). Spacing between mounting plates should be 200mm. The supply to the busbar is via a busbar connection (ZB 35, ZB 16 or ZF 4S). N-cross-connections with busbar system 10 x 3 mm. green Inclined / angled Yes Yes TS 35 Wemid No 1 2 right - 50 °C, + 120 °C Z-series Tension clamp connection Snap-on V-0 PE terminal -1- Product catalogue | Terminals | Tension clamp technology | Modular installation terminals | Modular PE conductor terminals CSA rating data Min. cross-section (CSA) Max. cross-section (CSA) AWG 16 AWG 6 Conductors for clamping (additional connection) Flexible with ferrule, min. (DIN 46228 pt 1) Flexible with ferrule, max. (DIN 46228 pt 1) 1.5 mm² 10 mm² Conductors for clamping (rated connection) Clamping range, min. Clamping range, max. Type of connection Connection direction No. of connections Stripping length Blade size Gauge to IEC 60947-1 Solid, min. Solid, max. Stranded, min. Stranded, max. Flexible, min. Flexible, max. Flexible with ferrule, min. (DIN 46228/1) Flexible with ferrule, max. (DIN 46228/1) Flexible, min., ferrule with plastic collar (DIN 46228 pt 4) Flexible, max., ferrule with plastic collar (DIN 46228 pt 4) AWG conductor size, min. AWG conductor size, max. 1.3 mm² 16 mm² Clamping yoke connection Inclined / angled 2 18 mm 1.0 x 5.5 mm A6 1.5 mm² 16 mm² 1.5 mm² 16 mm² 1.5 mm² 10 mm² 1.5 mm² 10 mm² 1.5 mm² 10 mm² AWG 16 AWG 6 Dimensions Width Height of lowest version Length TS 35 offset 10 mm 48.5 mm 86.5 mm 37.88 mm Distribution terminals No. of potentials PE function 1 Yes N-conductor disconnect terminal For N-busbar 3 x 10 mm Rating data Rated cross-section Rated voltage Rated impulse voltage Standards Pollution severity 10 mm² 400 V 6 kV IEC 60947-7-2 3 -2- Product catalogue | Terminals | Tension clamp technology | Modular installation terminals | Modular PE conductor terminals Rating data UL rating data Min. cross-section (UL) Max. cross-section (UL) AWG 16 AWG 6 Approvals Approvals institutes Classifications eClass 4.1 eClass 5.0 eClass 5.1 27-14-11-20 27-14-11-20 27-14-11-20 Similar products Order No. 1808330000 Part designation ZPE 2.5 S 1808340000 ZPE 4 S 1808350000 ZPE 6 S 1739610000 ZPE 16S Version Feed-through terminal, 2.5 mm², Tension clamp connection, Wemid, green, TS 35 Feed-through terminal, 4 mm², Tension clamp connection, Wemid, green, TS 35 Feed-through terminal, 6 mm², Tension clamp connection, Wemid, green, TS 35 Feed-through terminal, 16 mm², Tension clamp connection, Wemid, green, TS 35 -3-