Product catalogue | Terminals | Tension clamp technology | Modular installation terminals | Feed-through terminals for
10x3 busbar
General ordering data
Order No.
Part designation
Version
EAN
Qty.
Product notes
Note, ordering data
Note, technical data
Product description
1739590000
ZDU 16S BL
Feed-through terminal, 16 mm², Tension clamp
connection, Wemid, blue, TS 35
4008190957056
25 pc(s).
Spacing between mounting plates should be
200mm.
The supply to the busbar is via a busbar
connection (ZB 35, ZB 16 or ZF 4S).
N-cross-connections with busbar system 10 x 3
mm.
Additional technical data
Colour of insulating material
Connection direction
End plate required
Explosion-tested version "Ex e"
Installation advice
Insulating material
Levels cross-connected internally
No. of levels
No. of terminal strips per level
Open sides
Operating temperature range
Product family
Type of connection
Type of mounting
UL 94 flammability rating of insulation material
Version
blue
Inclined / angled
Yes
No
TS 35
Wemid
No
1
1
right
- 50 °C, + 120 °C
Z-series
Tension clamp connection
Snap-on
V-0
End bracket
CSA rating data
Voltage (CSA)
CSA current
Min. cross-section (CSA)
Max. cross-section (CSA)
300 V
65 A
AWG 14
AWG 4
-1-
Product catalogue | Terminals | Tension clamp technology | Modular installation terminals | Feed-through terminals for
10x3 busbar
Conductors for clamping (additional
connection)
No. of connections
Flexible with ferrule, min. (DIN 46228 pt 1)
Flexible with ferrule, max. (DIN 46228 pt 1)
Conductors for clamping (rated connection)
Clamping range, min.
Clamping range, max.
Type of connection
Connection direction
No. of connections
Stripping length
Blade size
Gauge to IEC 60947-1
Solid, min.
Solid, max.
Stranded, min.
Stranded, max.
Flexible, min.
Flexible, max.
Flexible with ferrule, min. (DIN 46228/1)
Flexible with ferrule, max. (DIN 46228/1)
Flexible, min., ferrule with plastic collar (DIN
46228 pt 4)
Flexible, max., ferrule with plastic collar (DIN
46228 pt 4)
AWG conductor size, min.
AWG conductor size, max.
2
1.5 mm²
16 mm²
1.5 mm²
25 mm²
Tension clamp connection
Inclined / angled
2
18 mm
1.0 x 5.5 mm
A7
1.5 mm²
16 mm²
16 mm²
25 mm²
1.5 mm²
16 mm²
1.5 mm²
16 mm²
1.5 mm²
16 mm²
AWG 14
AWG 4
Dimensions
Width
Height of lowest version
Length
TS 35 offset
12 mm
48.5 mm
95 mm
31.5 mm
Distribution terminals
No. of potentials
1
N-conductor disconnect terminal
For N-busbar
3 x 10 mm
Rating data
Rated cross-section
Rated voltage
Rated impulse voltage
Rated current
Standards
Current with max. conductor
Pollution severity
16 mm²
400 V
6 kV
76 A
IEC 60947-7-1
76 A
3
-2-
Product catalogue | Terminals | Tension clamp technology | Modular installation terminals | Feed-through terminals for
10x3 busbar
UL rating data
Voltage (UL)
Current (UL)
Min. cross-section (UL)
Max. cross-section (UL)
600 V
65 A
AWG 14
AWG 4
Approvals
Approvals institutes
Classifications
eClass 4.1
eClass 5.0
eClass 5.1
27-14-11-20
27-14-11-20
27-14-11-20
Similar products
Order No.
1808010000
Part designation
ZDU 2.5 S
1808020000
ZDU 2.5 S BL
1808360000
ZDU 4 S
1808370000
ZDU 4 S BL
1808230000
ZDU 6 S
1808240000
ZDU 6 S BL
1739540000
ZDU 10S
1739550000
ZDU 10S BL
1739580000
ZDU 16S
Version
Feed-through terminal, 2.5 mm², Tension clamp connection, Wemid,
dark beige, TS 35
Feed-through terminal, 2.5 mm², Tension clamp connection, Wemid,
blue, TS 35
Feed-through terminal, 4 mm², Tension clamp connection, Wemid,
dark beige, TS 35
Feed-through terminal, 4 mm², Tension clamp connection, Wemid,
blue, TS 35
Feed-through terminal, 6 mm², Tension clamp connection, Wemid,
dark beige, TS 35
Feed-through terminal, 6 mm², Tension clamp connection, Wemid,
blue, TS 35
Feed-through terminal, 10 mm², Clamping yoke connection, Wemid,
dark beige, TS 35
Feed-through terminal, 10 mm², Clamping yoke connection, Wemid,
blue, TS 35
Feed-through terminal, 16 mm², Tension clamp connection, Wemid,
dark beige, TS 35
-3-