Product catalogue | Terminals | Tension clamp technology | Modular installation terminals | Modular PE conductor
terminals
General ordering data
Order No.
Part designation
Version
EAN
Qty.
Product notes
Note, ordering data
Note, technical data
Product description
Additional technical data
Colour of insulating material
Connection direction
End plate required
Explosion-tested version "Ex e"
Installation advice
Insulating material
Levels cross-connected internally
No. of levels
No. of terminal strips per level
Open sides
Operating temperature range
Product family
Type of connection
Type of mounting
UL 94 flammability rating of insulation material
Version
1739610000
ZPE 16S
Feed-through terminal, 16 mm², Tension clamp
connection, Wemid, green, TS 35
4008190957063
25 pc(s).
Spacing between mounting plates should be
200mm.
To maintain the current-carrying capacity of the
terminal rail, use the TS 35 x 15.
N-cross-connections with busbar system 10 x 3
mm.
green
Inclined / angled
Yes
No
TS 35
Wemid
No
1
1
right
- 50 °C, + 120 °C
Z-series
Tension clamp connection
Snap-on
V-0
PE terminal
-1-
Product catalogue | Terminals | Tension clamp technology | Modular installation terminals | Modular PE conductor
terminals
CSA rating data
Min. cross-section (CSA)
Max. cross-section (CSA)
AWG 14
AWG 4
Conductors for clamping (additional
connection)
Flexible with ferrule, min. (DIN 46228 pt 1)
Flexible with ferrule, max. (DIN 46228 pt 1)
1.5 mm²
16 mm²
Conductors for clamping (rated connection)
Clamping range, min.
Clamping range, max.
Type of connection
Connection direction
No. of connections
Stripping length
Blade size
Gauge to IEC 60947-1
Solid, min.
Solid, max.
Stranded, min.
Stranded, max.
Flexible, min.
Flexible, max.
Flexible with ferrule, min. (DIN 46228/1)
Flexible with ferrule, max. (DIN 46228/1)
Flexible, min., ferrule with plastic collar (DIN
46228 pt 4)
Flexible, max., ferrule with plastic collar (DIN
46228 pt 4)
AWG conductor size, min.
AWG conductor size, max.
AWG conductor size, min.
1.5 mm²
25 mm²
Tension clamp connection
Inclined / angled
2
18 mm
1.0 x 5.5 mm
A7
1.5 mm²
16 mm²
16 mm²
25 mm²
1.5 mm²
16 mm²
1.5 mm²
16 mm²
1.5 mm²
16 mm²
AWG 14
AWG 4
1.5 mm²
Dimensions
Width
Height of lowest version
Length
TS 35 offset
12 mm
48 mm
95 mm
38 mm
Distribution terminals
No. of potentials
PE function
1
Yes
N-conductor disconnect terminal
For N-busbar
3 x 10 mm
Rating data
Rated cross-section
Rated voltage
Rated impulse voltage
Standards
16 mm²
400 V
6 kV
IEC 60947-7-2
-2-
Product catalogue | Terminals | Tension clamp technology | Modular installation terminals | Modular PE conductor
terminals
Rating data
Pollution severity
3
UL rating data
Min. cross-section (UL)
Max. cross-section (UL)
AWG 14
AWG 4
Approvals
Approvals institutes
Classifications
eClass 4.1
eClass 5.0
eClass 5.1
27-14-11-20
27-14-11-20
27-14-11-20
Similar products
Order No.
1808330000
Part designation
ZPE 2.5 S
1808340000
ZPE 4 S
1808350000
ZPE 6 S
1739570000
ZPE 10S
Version
Feed-through terminal, 2.5 mm², Tension clamp connection, Wemid,
green, TS 35
Feed-through terminal, 4 mm², Tension clamp connection, Wemid,
green, TS 35
Feed-through terminal, 6 mm², Tension clamp connection, Wemid,
green, TS 35
Feed-through terminal, 10 mm², Clamping yoke connection, Wemid,
green, TS 35
-3-
