1739620000

    Data sheet Z-series ZDU 35 Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com     Product image Spring connection with tension clamp Technology Tension clamp technology is a universal contact system for all common conductor connection types. Its fantastic level of flexibility makes the tension clamp a profitable alternative connection. General ordering data   Type Order No. Version GTIN (EAN) Qty.   ZDU 35 1739620000 Feed-through terminal, Tension clamp connection, 35 mm², 800 V, 125 A, Dark Beige 4008190957070 10 pc(s). Creation date November 16, 2018 3:01:45 PM CET   Catalogue status 09.11.2018 / We reserve the right to make technical changes. 1     Data sheet Z-series ZDU 35   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions and weights   Width Height Depth Depth including DIN rail   16 mm 100.5 mm 58.5 mm 59.5 mm         Width (inches) Height (inches) Depth (inches) Net weight 0.63 inch 3.957 inch 2.303 inch 82.009 g -50 °C   Continuous operating temp., max. 120 °C Wemid V-0     Colour   Dark Beige KEMA00ATEX2107U 690 V 35 mm² 109 A For operating temperature range see EC Design Test Certificate / IEC ExCertificate of Conformity II 2 G D           Certificate No. (IECEX) Current (ATEX) Max. voltage (IECEX) Wire cross section max. (IECEX) Marking EN 60079-7 IECEXULD05.0009U 109 A 550 V 35 mm²     Temperatures   Continuous operating temp., min.   Material data   Material UL 94 flammability rating   Rating data IECEx/ATEX   Certificate No. (ATEX) Max. voltage (ATEX) Wire cross section max. (ATEX) Current (IECEX) Operating temperature range Ex 2014/34/EU label   Ex eb II C Gb System specifications   Version Number of levels Number of potentials per tier PE connection   Tension-clamp connection,   for plug-in cross-connector, closed   1   1   No End cover plate required No. of clamping points per level Levels cross-connected internally Mounting rail No 2 No TS 35 Additional technical data   Explosion-tested version Number of similar terminals Type of mounting   Yes 1 Snap-on       Installation advice Open sides   Direct mounting closed 200039-1152892 120 A 600 V 600 V 12 AWG           Current size B (CSA) Current size D (CSA) Voltage size C (CSA) Wire cross section max. (CSA)   120 A 5A 600 V 2 AWG CSA rating data   Certificate No. (CSA) Current size C (CSA) Voltage size B (CSA) Voltage size D (CSA) Wire cross section min. (CSA)   Creation date November 16, 2018 3:01:45 PM CET   Catalogue status 09.11.2018 / We reserve the right to make technical changes. 2     Data sheet Z-series ZDU 35   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Conductors for clamping (rated connection)   Blade size Clamping range, min. 1.0 x 5.5 mm 2.5 mm² Connection cross-section, stranded, min. 2.5 mm² Gauge to IEC 60947-1 A8 Stripping length 25 mm Wire connection cross section AWG, max. AWG 2 Wire connection cross section, finely stranded, max. 35 mm² Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min. 2.5 mm² Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min. 2.5 mm² Wire connection cross-section, solid core, max. 16 mm²                   Clamping range, max. Connection cross-section, stranded, max. Connection direction Number of connections Type of connection Wire connection cross section AWG, min. Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max. Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max. Wire connection cross-section, finely stranded, min. 35 mm² 35 mm² top 2 Tension clamp connection AWG 12 35 mm² 35 mm² 2.5 mm²   Wire connection cross-section, solid core, min.         Rated voltage Current at maximum wires Volume resistance according to IEC 60947-7-x Pollution severity E60693 12 AWG 12 AWG 600 V         Conductor size Factory wiring max. (UR) 2 AWG Conductor size Field wiring max. (UR) 2 AWG Current size C (UR) 120 A   EC000897 EC000897 30-21-18-11 27-14-11-20 27-14-11-20 27-14-11-20             ETIM 4.0 ETIM 6.0 eClass 5.1 eClass 7.1 eClass 9.0     2.5 mm² Rating data   Rated cross-section Rated current Standards Rated impulse withstand voltage   35 mm² 125 A IEC 60947-7-1 8 kV 800 V 125 A 0.26 mΩ 3 UL rating data   Certificate No. (UR) Conductor size Factory wiring min. (UR) Conductor size Field wiring min. (UR) Voltage size C (UR)   Classifications   ETIM 3.0 ETIM 5.0 UNSPSC eClass 6.2 eClass 8.1 eClass 9.1   EC000897 EC000897 27-14-11-20 27-14-11-20 27-14-11-20 Product information   Descriptive text ordering data Descriptive text technical data   End plate is integrated. 1000 VDC rated voltage tested. Cross-connection of ZDU 10 and ZDU 35 is possible using the ZQV 35-10. Cross-connection of ZDU 16 and ZDU 35 is possible using the ZQV 35-16. Creation date November 16, 2018 3:01:45 PM CET   Catalogue status 09.11.2018 / We reserve the right to make technical changes. 3     Data sheet Z-series ZDU 35   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Approvals   Approvals ROHS   Conform Downloads   Approval/Certificate/Document of Conformity Brochure/Catalogue Engineering Data Engineering Data   Attestation of Conformity DE_PT1101_20160418_1244_ISSUE01.pdf CAT 1 TERM 16/17 EN EPLAN, WSCAD, Zuken E3.S STEP Safety note   Safety notice   Safety Information Creation date November 16, 2018 3:01:45 PM CET   Catalogue status 09.11.2018 / We reserve the right to make technical changes. 4     Data sheet Z-series ZDU 35   Drawings Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Creation date November 16, 2018 3:01:45 PM CET   Catalogue status 09.11.2018 / We reserve the right to make technical changes. 5