1739650000

    Data sheet Z-series ZPE 35 Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com     Product image Spring connection with tension clamp Technology Tension clamp technology is a universal contact system for all common conductor connection types. Its fantastic level of flexibility makes the tension clamp a profitable alternative connection. General ordering data   Type Order No. Version GTIN (EAN) Qty.   ZPE 35 1739650000 PE terminal, Tension clamp connection, 35 mm², 4200 A (35 mm²), green / yellow 4008190957100 10 pc(s). Creation date November 16, 2018 3:11:17 PM CET   Catalogue status 09.11.2018 / We reserve the right to make technical changes. 1     Data sheet Z-series ZPE 35   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions and weights   Width Height Depth Depth including DIN rail   16 mm 100.5 mm 58.5 mm 59.5 mm         Width (inches) Height (inches) Depth (inches) Net weight 0.63 inch 3.957 inch 2.303 inch 108.5 g -50 °C   Continuous operating temp., max. 120 °C Wemid V-0     Colour   green / yellow KEMA00ATEX2107U 35 mm² For operating temperature range see EC Design Test Certificate / IEC ExCertificate of Conformity II 2 G D       Certificate No. (IECEX) Wire cross section max. (IECEX) Marking EN 60079-7 IECEXULD05.0009U 35 mm²     Temperatures   Continuous operating temp., min.   Material data   Material UL 94 flammability rating   Rating data IECEx/ATEX   Certificate No. (ATEX) Wire cross section max. (ATEX) Operating temperature range Ex 2014/34/EU label   Ex eb II C Gb System specifications   Version Number of levels Levels cross-connected internally Mounting rail   Tension-clamp connection,   With PE connection, closed   1   No   TS 35 End cover plate required No. of clamping points per level PE connection PEN function No 2 Yes Yes Additional technical data   Explosion-tested version Number of similar terminals Type of mounting   Yes 1 Snap-on       Installation advice Open sides   Direct mounting closed 200039-1152892 12 AWG     Wire cross section max. (CSA)   2 AWG CSA rating data   Certificate No. (CSA) Wire cross section min. (CSA)   Creation date November 16, 2018 3:11:17 PM CET   Catalogue status 09.11.2018 / We reserve the right to make technical changes. 2     Data sheet Z-series ZPE 35   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Conductors for clamping (rated connection)   Blade size Clamping range, min. 1.0 x 5.5 mm 2.5 mm² Connection cross-section, stranded, min. 2.5 mm² Gauge to IEC 60947-1 A8 Stripping length 25 mm Wire connection cross section AWG, max. AWG 2 Wire connection cross section, finely stranded, max. 35 mm² Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min. 2.5 mm² Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min. 2.5 mm² Wire connection cross-section, solid core, max. 16 mm²                   Clamping range, max. Connection cross-section, stranded, max. Connection direction Number of connections Type of connection Wire connection cross section AWG, min. Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max. Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max. Wire connection cross-section, finely stranded, min. 35 mm² 35 mm² top 2 Tension clamp connection AWG 12 35 mm² 35 mm² 2.5 mm²   Wire connection cross-section, solid core, min. 4200 A (35 mm²)   PEN function Yes 35 mm²     800 V   Rated voltage to adjoining terminal Volume resistance according to IEC 60947-7-x Pollution severity       Conductor size Factory wiring max. (UR) 2 AWG Conductor size Field wiring max. (UR) 2 AWG               ETIM 4.0 ETIM 6.0 eClass 5.1 eClass 7.1 eClass 9.0     2.5 mm² PE rating data   Rated short-time current   Rating data   Rated cross-section Standards Rated impulse withstand voltage to adjacent terminal   IEC 60947-7-2 8 kV 0.26 mΩ 3 UL rating data   Certificate No. (UR) E60693 Conductor size Factory wiring min. (UR) 12 AWG Conductor size Field wiring min. (UR) 12 AWG   Classifications   ETIM 3.0 ETIM 5.0 UNSPSC eClass 6.2 eClass 8.1 eClass 9.1   EC000901 EC000491 30-21-18-11 27-14-03-05 27-14-11-41 27-14-11-41 EC000491 EC000901 27-14-03-05 27-14-03-05 27-14-11-41 Product information   Descriptive text ordering data Descriptive text technical data Instructions for accessories   Integrated end plate. To ensure the current-carrying capacity of the mounting rail, it is necessary to use the TS 35 x 15. The plug-in cross-connections ZQV 35/2 (1739700000) can be used. Creation date November 16, 2018 3:11:17 PM CET   Catalogue status 09.11.2018 / We reserve the right to make technical changes. 3     Data sheet Z-series ZPE 35   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Approvals   Approvals ROHS   Conform Downloads   Approval/Certificate/Document of Conformity Brochure/Catalogue Engineering Data Engineering Data   Attestation of Conformity DE_PT1102_20160418_1397_ISSUE01.pdf CAT 1 TERM 16/17 EN EPLAN, WSCAD, Zuken E3.S STEP Safety note   Safety notice   Safety Information Creation date November 16, 2018 3:11:17 PM CET   Catalogue status 09.11.2018 / We reserve the right to make technical changes. 4     Data sheet Z-series ZPE 35   Drawings Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Creation date November 16, 2018 3:11:17 PM CET   Catalogue status 09.11.2018 / We reserve the right to make technical changes. 5