1745240000

    Data sheet Z-series ZDU 16 BL Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com     Product image Spring connection with tension clamp Technology Tension clamp technology is a universal contact system for all common conductor connection types. Its fantastic level of flexibility makes the tension clamp a profitable alternative connection. General ordering data   Type Order No. Version GTIN (EAN) Qty.   ZDU 16 BL 1745240000 Feed-through terminal, Tension clamp connection, 16 mm², 1000 V, 76 A, Blue 4008190996772 25 pc(s). Creation date November 30, 2018 6:58:54 PM CET   Catalogue status 26.11.2018 / We reserve the right to make technical changes. 1     Data sheet Z-series ZDU 16 BL   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions and weights   Width Height Depth Depth including DIN rail   12.1 mm 82.5 mm 50.5 mm 51.5 mm         Width (inches) Height (inches) Depth (inches) Net weight 0.476 inch 3.248 inch 1.988 inch 36.992 g -50 °C   Continuous operating temp., max. 120 °C Wemid V-0     Colour   Blue KEMA99ATEX5514U 550 V 16 mm² 63 A For operating temperature range see EC Design Test Certificate / IEC ExCertificate of Conformity II 2 G D           Certificate No. (IECEX) Current (ATEX) Max. voltage (IECEX) Wire cross section max. (IECEX) Marking EN 60079-7 IECEXULD05.0009U 66 A 550 V 16 mm²     Temperatures   Continuous operating temp., min.   Material data   Material UL 94 flammability rating   Rating data IECEx/ATEX   Certificate No. (ATEX) Max. voltage (ATEX) Wire cross section max. (ATEX) Current (IECEX) Operating temperature range Ex 2014/34/EU label   Ex eb II C Gb System specifications   Version Number of levels Number of potentials per tier PE connection   Tension-clamp connection,   for plug-in cross-connector, One end without connector   1   1   No End cover plate required No. of clamping points per level Levels cross-connected internally Mounting rail Yes 2 No TS 35 Additional technical data   Explosion-tested version Number of similar terminals Type of mounting   Yes 1 Snap-on       Installation advice Open sides   Busbar right 200039-1152892 65 A 600 V 14 AWG         Current size B (CSA) Voltage size B (CSA) Wire cross section max. (CSA)   65 A 600 V 4 AWG CSA rating data   Certificate No. (CSA) Current size C (CSA) Voltage size C (CSA) Wire cross section min. (CSA)   Creation date November 30, 2018 6:58:54 PM CET   Catalogue status 26.11.2018 / We reserve the right to make technical changes. 2     Data sheet Z-series ZDU 16 BL   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Conductors for clamping (rated connection)   Blade size Clamping range, min. 1.0 x 5.5 mm 1.5 mm² Connection cross-section, stranded, min. 1.5 mm² Gauge to IEC 60947-1 A7 Stripping length 18 mm Wire connection cross section AWG, max. AWG 4 Wire connection cross section, finely stranded, max. 16 mm² Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min. 1.5 mm² Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min. 1.5 mm² Wire connection cross-section, solid core, max. 16 mm²                   Clamping range, max. Connection cross-section, stranded, max. Connection direction Number of connections Type of connection Wire connection cross section AWG, min. Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max. Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max. Wire connection cross-section, finely stranded, min. 25 mm² 25 mm² top 2 Tension clamp connection AWG 14 16 mm² 16 mm² 1.5 mm²   Wire connection cross-section, solid core, min. 42 mm     16 mm² 76 A         Rated voltage Current at maximum wires Volume resistance according to IEC 60947-7-x Pollution severity E60693 14 AWG 14 AWG 600 V         Conductor size Factory wiring max. (UR) 4 AWG Conductor size Field wiring max. (UR) 4 AWG Current size C (UR) 65 A   EC000897 EC000897 30-21-18-11 27-14-11-20 27-14-11-20 27-14-11-20             ETIM 4.0 ETIM 6.0 eClass 5.1 eClass 7.1 eClass 9.0     1.5 mm² Dimensions   TS 35 offset   Rating data   Rated cross-section Rated current Standards Rated impulse withstand voltage   IEC 60947-7-1 8 kV 1,000 V 98 A 0.42 mΩ 3 UL rating data   Certificate No. (UR) Conductor size Factory wiring min. (UR) Conductor size Field wiring min. (UR) Voltage size C (UR)   Classifications   ETIM 3.0 ETIM 5.0 UNSPSC eClass 6.2 eClass 8.1 eClass 9.1   EC000897 EC000897 27-14-11-20 27-14-11-20 27-14-11-20 Product information   Descriptive text ordering data Descriptive text technical data   1000 VDC rated voltage tested. Cross-connection of ZDU 16 and ZDU 35 is possible using the ZQV 35-16. Cross-connection of ZDU 10 and ZDU 16 is possible using the ZQV 16-10. Creation date November 30, 2018 6:58:54 PM CET   Catalogue status 26.11.2018 / We reserve the right to make technical changes. 3     Data sheet Z-series ZDU 16 BL   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Approvals   Approvals ROHS   Conform Downloads   Approval/Certificate/Document of Conformity Brochure/Catalogue Engineering Data Engineering Data User Documentation   Attestation of Conformity DE_PT1101_20160418_1164_ISSUE01.pdf CAT 1 TERM 16/17 EN EPLAN, WSCAD, Zuken E3.S STEP Usage of terminals in EXi atmospheres Safety note   Safety notice   Safety Information Creation date November 30, 2018 6:58:54 PM CET   Catalogue status 26.11.2018 / We reserve the right to make technical changes. 4     Data sheet Z-series ZDU 16 BL   Drawings Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Creation date November 30, 2018 6:58:54 PM CET   Catalogue status 26.11.2018 / We reserve the right to make technical changes. 5