1768000000

    Data sheet Z-series ZMAK 2.5 Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com     Product image Spring connection with tension clamp Technology Tension clamp technology is a universal contact system for all common conductor connection types. Its fantastic level of flexibility makes the tension clamp a profitable alternative connection. General ordering data   Type Order No. Version GTIN (EAN) Qty.   ZMAK 2.5 1768000000 Motor-connection terminal, Tension clamp connection, 2.5 mm², 400 V, Dark Beige 4032248117376 25 pc(s). Creation date November 30, 2018 11:11:20 PM CET   Catalogue status 26.11.2018 / We reserve the right to make technical changes. 1     Data sheet Z-series ZMAK 2.5   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions and weights   Width Height Depth Depth including DIN rail   5.1 mm 102 mm 69.5 mm 70 mm         Width (inches) Height (inches) Depth (inches) Net weight 0.201 inch 4.016 inch 2.736 inch 22.38 g -50 °C   Continuous operating temp., max. 120 °C Wemid V-0     Colour   Dark Beige Temperatures   Continuous operating temp., min.   Material data   Material UL 94 flammability rating   System specifications   Version Number of levels Number of potentials per tier PE connection   Tension-clamp connection,   With PE connection, One end without connector   4   1   Yes End cover plate required No. of clamping points per level Levels cross-connected internally Mounting rail Yes 2 No TS 35 Additional technical data   Explosion-tested version Number of similar terminals Type of mounting   No 1 Snap-on       Installation advice Open sides   Direct mounting right 200039-1152892 300 V 26 AWG       Current size D (CSA) Wire cross section max. (CSA)   25 A 12 AWG           Clamping range, max. Connection direction Number of connections Type of connection Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max. Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max. Wire connection cross-section, finely stranded, min. 4 mm² top 7 Tension clamp connection CSA rating data   Certificate No. (CSA) Voltage size D (CSA) Wire cross section min. (CSA)   Conductors for clamping (rated connection)   Blade size Clamping range, min. Gauge to IEC 60947-1 Stripping length Wire connection cross section, finely stranded, max. Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min. Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min. Wire connection cross-section, solid core, max.   0.6 x 3.5 mm 0.13 mm² A3 10 mm 4 mm² 0.5 mm² 0.5 mm² 4 mm²       Wire connection cross-section, solid core, min. 2.5 mm² 2.5 mm² 0.5 mm² 0.5 mm² Creation date November 30, 2018 11:11:20 PM CET   Catalogue status 26.11.2018 / We reserve the right to make technical changes. 2     Data sheet Z-series ZMAK 2.5   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Rating data   Rated cross-section Rated current Standards Rated impulse withstand voltage Surge voltage category   2.5 mm² 24 A       400 V 31 A     Rated voltage Current at maximum wires Volume resistance according to IEC 60947-7-x Pollution severity   E60693 26 AWG 26 AWG 10 A 300 V           Conductor size Factory wiring max. (UR) Conductor size Field wiring max. (UR) Current size B (UR) Voltage size B (UR)   12 AWG 12 AWG 25 A 300 V EC000897 EC000897 30-21-18-01 27-14-11-20 27-14-11-28 27-14-11-20             ETIM 4.0 ETIM 6.0 eClass 5.1 eClass 7.1 eClass 9.0   EC000897 EC000897 27-14-11-18 27-14-11-20 27-14-11-28 IEC 60947-7-1 (-7-2) 6 kV III 3.99 mΩ 3 UL rating data   Certificate No. (UR) Conductor size Factory wiring min. (UR) Conductor size Field wiring min. (UR) Current size D (UR) Voltage size D (UR)   Classifications   ETIM 3.0 ETIM 5.0 UNSPSC eClass 6.2 eClass 8.1 eClass 9.1   Approvals   Approvals ROHS   Conform Downloads   Approval/Certificate/Document of Conformity Brochure/Catalogue Engineering Data Engineering Data   DE_PT1102_20160418_1367_ISSUE01.pdf CAT 1 TERM 16/17 EN EPLAN, WSCAD, Zuken E3.S STEP Safety note   Safety notice   Safety Information Creation date November 30, 2018 11:11:20 PM CET   Catalogue status 26.11.2018 / We reserve the right to make technical changes. 3     Data sheet Z-series ZMAK 2.5   Drawings Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Creation date November 30, 2018 11:11:20 PM CET   Catalogue status 26.11.2018 / We reserve the right to make technical changes. 4