1775510000

    Data sheet Z-series ZPE 1.5 Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com     Product image Spring connection with tension clamp Technology Tension clamp technology is a universal contact system for all common conductor connection types. Its fantastic level of flexibility makes the tension clamp a profitable alternative connection. General ordering data   Type Order No. Version GTIN (EAN) Qty.   ZPE 1.5 1775510000 PE terminal, Tension clamp connection, 1.5 mm², 180 A (1.5 mm²), green / yellow 4032248181452 100 pc(s). Creation date December 10, 2018 9:09:47 PM CET   Catalogue status 07.12.2018 / We reserve the right to make technical changes. 1     Data sheet Z-series ZPE 1.5   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions and weights   Width Height Depth Depth including DIN rail   3.5 mm 54.5 mm 36.5 mm 37 mm         Width (inches) Height (inches) Depth (inches) Net weight 0.138 inch 2.146 inch 1.437 inch 8.06 g -50 °C   Continuous operating temp., max. 120 °C Wemid V-0     Colour   green / yellow KEMA01ATEX2106U 1.5 mm² For operating temperature range see EC Design Test Certificate / IEC ExCertificate of Conformity II 2 G D       Certificate No. (IECEX) Wire cross section max. (IECEX) Marking EN 60079-7 IECEXULD05.0009U 1.5 mm²     Temperatures   Continuous operating temp., min.   Material data   Material UL 94 flammability rating   Rating data IECEx/ATEX   Certificate No. (ATEX) Wire cross section max. (ATEX) Operating temperature range Ex 2014/34/EU label   Ex eb II C Gb System specifications   Version Number of levels Levels cross-connected internally Mounting rail   Tension-clamp connection,   With PE connection, One end without connector   1   No   TS 35 End cover plate required No. of clamping points per level PE connection PEN function Yes 2 Yes No Additional technical data   Explosion-tested version Number of similar terminals Type of mounting   Yes 1 Snap-on       Installation advice Open sides   Direct mounting right 200039-1152892 26 AWG     Wire cross section max. (CSA)   14 AWG CSA rating data   Certificate No. (CSA) Wire cross section min. (CSA)   Creation date December 10, 2018 9:09:47 PM CET   Catalogue status 07.12.2018 / We reserve the right to make technical changes. 2     Data sheet Z-series ZPE 1.5   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Conductors for clamping (rated connection)   Blade size Clamping range, min. Gauge to IEC 60947-1 Stripping length Twin wire-end ferrules, min. Wire connection cross section AWG, max. Wire connection cross section, finely stranded, max. Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min. Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min. Wire connection cross-section, solid core, max.   0.4 x 2.0 mm 0.05 mm² B1 10 mm 0.5 mm² AWG 16 1.5 mm² 0.5 mm² 0.5 mm²                   Clamping range, max. Connection direction Number of connections Twin wire-end ferrules, max. Type of connection Wire connection cross section AWG, min. Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max. Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max. Wire connection cross-section, finely stranded, min. 1.5 mm² top 2 0.75 mm² Tension clamp connection AWG 30 1.5 mm² 1.5 mm² 0.5 mm²   Wire connection cross-section, solid core, min. 180 A (1.5 mm²)   PEN function No 1.5 mm²     500 V   Rated voltage to adjoining terminal Volume resistance according to IEC 60947-7-x Pollution severity       Conductor size Factory wiring max. (UR) 14 AWG Conductor size Field wiring max. (UR) 14 AWG               ETIM 4.0 ETIM 6.0 eClass 5.1 eClass 7.1 eClass 9.0   1.5 mm² 0.5 mm² PE rating data   Rated short-time current   Rating data   Rated cross-section Standards Rated impulse withstand voltage to adjacent terminal   IEC 60947-7-2 6 kV 1.83 mΩ 3 UL rating data   Certificate No. (UR) E60693 Conductor size Factory wiring min. (UR) 26 AWG Conductor size Field wiring min. (UR) 26 AWG   Classifications   ETIM 3.0 ETIM 5.0 UNSPSC eClass 6.2 eClass 8.1 eClass 9.1   EC000901 EC000491 30-21-18-11 27-14-03-05 27-14-11-41 27-14-11-41 EC000491 EC000901 27-14-03-05 27-14-03-05 27-14-11-41 Creation date December 10, 2018 9:09:47 PM CET   Catalogue status 07.12.2018 / We reserve the right to make technical changes. 3     Data sheet Z-series ZPE 1.5   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Approvals   Approvals ROHS   Conform Downloads   Approval/Certificate/Document of Conformity Brochure/Catalogue Engineering Data Engineering Data User Documentation   Attestation of Conformity IECEx Certificate ATEX Certificate DE_PT1102_20160418_1376_ISSUE01.pdf CAT 1 TERM 16/17 EN EPLAN, WSCAD, Zuken E3.S STEP Cross Connection Guide Safety note   Safety notice   Safety Information Creation date December 10, 2018 9:09:47 PM CET   Catalogue status 07.12.2018 / We reserve the right to make technical changes. 4     Data sheet Z-series ZPE 1.5   Drawings Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Creation date December 10, 2018 9:09:47 PM CET   Catalogue status 07.12.2018 / We reserve the right to make technical changes. 5