1780880000

Product catalogue | Terminals | Screwing technology | Stud terminals | Single-screw terminals General ordering data Order No. Part designation Version EAN Qty. Product notes Note, accessories 1780880000 WF 12 Stud terminal, 120 mm², Threaded stud connection, Wemid, dark beige, TS 35 4032248219360 20 pc(s). With WTW...2300 made from epoxy resin, rated current is 2300 V according to prelim. EN 50124-1 Additional technical data Colour of insulating material Connection direction End plate required Explosion-tested version "Ex e" Installation advice Insulating material Levels cross-connected internally No. of identical terminals No. of levels No. of terminal strips per level Open sides Operating temperature range Product family Type of connection Type of mounting UL 94 flammability rating of insulation material Version dark beige on side No No TS 35 Wemid No 1 1 1 Open - 50 °C, + 120 °C W-Series Screwed Snap-on V-0 Stud terminal CSA rating data Voltage (CSA) CSA current Min. cross-section (CSA) 1,000 V 320 A AWG 10 -1- Product catalogue | Terminals | Screwing technology | Stud terminals | Single-screw terminals CSA rating data Max. cross-section (CSA) kcmil 250 Conductors for clamping (rated connection) Type of connection Connection direction Flexible, min. Flexible, max. Threaded stud connection on side 6 mm² 120 mm² Dimensions Width Height of lowest version Length TS 35 offset 33.8 mm 72 mm 67 mm 31.5 mm Rating data Rated cross-section Rated voltage Rated impulse voltage Rated current Current with max. conductor Pollution severity 120 mm² 1,000 V 8 kV 269 A 269 A 3 Stud connection 2 cable lugs to DIN 46234 2 cable lugs to DIN 46234 Cable lug to DIN 46234 Cable lug to DIN 46234 Clamping range, max. Clamping range, min. Impulse voltage with epoxy resin partition plate Stud size for spade connection Tightening torque range Voltage with epoxy resin partition plate 6...120 mm² 10...95 mm² 6...120 mm² 10...95 mm² 120 mm² 6 mm² 12 kV M 12 14...31 Nm 2,300 V UL rating data Voltage (UL) Current (UL) Min. cross-section (UL) Max. cross-section (UL) 1,000 V 255 A AWG 10 kcmil 250 Approvals Approvals institutes -2- Product catalogue | Terminals | Screwing technology | Stud terminals | Single-screw terminals Downloads STEP 1780880000_31397_WF_12_STP.stp Classifications ETIM 2.0 ETIM 3.0 eClass 4.1 eClass 5.0 eClass 5.1 NK EC002020 NK NK NK Similar products Order No. 1790130000 Part designation WF 5 1780850000 WF 6 1780860000 WF 8 1780870000 WF 10 1968990000 1969000000 1968960000 1968950000 1968940000 WF 5 NFF WF 6 NFF WF 8 NFF WF 10 NFF WF 12 NFF Version Stud terminal, 16 mm², Threaded stud connection, dark beige, TS 35 Stud terminal, 35 mm², Threaded stud connection, Wemid, dark beige, TS 35 Stud terminal, 50 mm², Threaded stud connection, Wemid, dark beige, TS 35 Stud terminal, 120 mm², Threaded stud connection, Wemid, dark beige, TS 35 -3-