1791000000

    Data sheet Z-series ZDK 2.5-2 BL Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com     Product image Spring connection with tension clamp Technology Tension clamp technology is a universal contact system for all common conductor connection types. Its fantastic level of flexibility makes the tension clamp a profitable alternative connection. General ordering data   Type Order No. Version GTIN (EAN) Qty.   ZDK 2.5-2 BL 1791000000 Feed-through terminal, Double-tier terminal, Tension clamp connection, 2.5 mm², 800 V, 24 A, Blue 4032248222971 50 pc(s). Creation date December 10, 2018 10:46:56 PM CET   Catalogue status 07.12.2018 / We reserve the right to make technical changes. 1     Data sheet Z-series ZDK 2.5-2 BL   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions and weights   Width Height Depth Depth including DIN rail   5.1 mm 72.5 mm 54.5 mm 55.5 mm         Width (inches) Height (inches) Depth (inches) Net weight 0.201 inch 2.854 inch 2.146 inch 9.66 g -50 °C   Continuous operating temp., max. 120 °C Wemid V-0     Colour   Blue KEMA97ATEX4677U 550 V 2.5 mm² 20 A For operating temperature range see EC Design Test Certificate / IEC ExCertificate of Conformity II 2 G D           Certificate No. (IECEX) Current (ATEX) Max. voltage (IECEX) Wire cross section max. (IECEX) Marking EN 60079-7 IECEXULD05.0009U 20 A 550 V 2.5 mm²     Temperatures   Continuous operating temp., min.   Material data   Material UL 94 flammability rating   Rating data IECEx/ATEX   Certificate No. (ATEX) Max. voltage (ATEX) Wire cross section max. (ATEX) Current (IECEX) Operating temperature range Ex 2014/34/EU label   Ex eb II C Gb System specifications   Version Number of levels Levels cross-connected internally Mounting rail   Tension-clamp connection,   for plug-in cross-connector, One end without connector   2   No   TS 35 End cover plate required No. of clamping points per level PE connection   Yes 2 No Additional technical data   Explosion-tested version Open sides   Yes right     Number of similar terminals Type of mounting 1 Snap-on 200039-1236167 600 V 30 AWG       Current size C (CSA) Wire cross section max. (CSA)   25 A 12 AWG CSA rating data   Certificate No. (CSA) Voltage size C (CSA) Wire cross section min. (CSA)   Creation date December 10, 2018 10:46:56 PM CET   Catalogue status 07.12.2018 / We reserve the right to make technical changes. 2     Data sheet Z-series ZDK 2.5-2 BL   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Conductors for clamping (rated connection)   Blade size Clamping range, min. Gauge to IEC 60947-1 Stripping length Wire connection cross section AWG, max. Wire connection cross section, finely stranded, max. Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min. Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min. Wire connection cross-section, solid core, max.   0.6 x 3.5 mm 0.05 mm² A2 10 mm AWG 14 2.5 mm² 0.5 mm² 0.5 mm² 4 mm²                 Clamping range, max. Connection direction Number of connections Type of connection Wire connection cross section AWG, min. Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max. Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max. Wire connection cross-section, finely stranded, min.   Wire connection cross-section, solid core, min.       Rated voltage Current at maximum wires Volume resistance according to IEC 60947-7-x Pollution severity 4 mm² Inclined / angled 4 Tension clamp connection AWG 30 2.5 mm² 1.5 mm² 0.5 mm² 0.5 mm² Rating data   Rated cross-section Rated current Standards Rated impulse withstand voltage   2.5 mm² 24 A IEC 60947-7-1 8 kV   800 V 24 A 2.66 mΩ 3 UL rating data   Certificate No. (cURus) E60693 Conductor size Factory wiring min. (cURus) 30 AWG Conductor size Field wiring min. (cURus) 30 AWG Voltage size C (cURus) 600 V       Conductor size Factory wiring max. (cURus) 12 AWG Conductor size Field wiring max. (cURus) 12 AWG Current size C (cURus) 20 A               ETIM 4.0 ETIM 6.0 eClass 5.1 eClass 7.1 eClass 9.0       Classifications   ETIM 3.0 ETIM 5.0 UNSPSC eClass 6.2 eClass 8.1 eClass 9.1   EC000897 EC000897 30-21-18-11 27-14-11-20 27-14-11-20 27-14-11-20 EC000897 EC000897 27-14-11-18 27-14-11-20 27-14-11-20 Product information   Descriptive text ordering data Descriptive text technical data   Rated voltage is reduced to 400 V when using the cross-connector. 2.5 mm² flexible wires with wire-end ferrules are crimped with the Weidmüller PZ 6/5 crimping tool. Creation date December 10, 2018 10:46:56 PM CET   Catalogue status 07.12.2018 / We reserve the right to make technical changes. 3     Data sheet Z-series ZDK 2.5-2 BL   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Approvals   Approvals ROHS   Conform Downloads   Approval/Certificate/Document of Conformity Brochure/Catalogue Engineering Data Engineering Data User Documentation   DE_PT1101_20160415_138_ISSUE01.pdf CAT 1 TERM 16/17 EN EPLAN, WSCAD, Zuken E3.S STEP Usage of terminals in EXi atmospheres Safety note   Safety notice   Safety Information Creation date December 10, 2018 10:46:56 PM CET   Catalogue status 07.12.2018 / We reserve the right to make technical changes. 4     Data sheet Z-series ZDK 2.5-2 BL   Drawings Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Creation date December 10, 2018 10:46:56 PM CET   Catalogue status 07.12.2018 / We reserve the right to make technical changes. 5