1791100000

    Data sheet Z-series ZDK 1.5 Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com     Product image Spring connection with tension clamp Technology Tension clamp technology is a universal contact system for all common conductor connection types. Its fantastic level of flexibility makes the tension clamp a profitable alternative connection. General ordering data   Type Order No. Version GTIN (EAN) Qty.   ZDK 1.5 1791100000 Feed-through terminal, Double-tier terminal, Tension clamp connection, 1.5 mm², 500 V, 17.5 A, Dark Beige 4032248239078 100 pc(s). Creation date December 10, 2018 10:52:27 PM CET   Catalogue status 07.12.2018 / We reserve the right to make technical changes. 1     Data sheet Z-series ZDK 1.5   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions and weights   Width Height Depth Depth including DIN rail   3.5 mm 75.5 mm 49.5 mm 50 mm         Width (inches) Height (inches) Depth (inches) Net weight 0.138 inch 2.972 inch 1.949 inch 7.81 g -50 °C   Continuous operating temp., max. 120 °C Wemid V-0     Colour   Dark Beige Temperatures   Continuous operating temp., min.   Material data   Material UL 94 flammability rating   System specifications   Version Number of levels Levels cross-connected internally Mounting rail   Tension-clamp connection,   for plug-in cross-connector, One end without connector   2   No   TS 35 End cover plate required No. of clamping points per level PE connection   Yes 2 No Additional technical data   Explosion-tested version Number of similar terminals Type of mounting   No 1 Snap-on       Installation advice Open sides   Direct mounting right 154685-1461041 600 V 28 AWG       Current size C (CSA) Wire cross section max. (CSA)   10 A 16 AWG             Clamping range, max. Connection direction Number of connections Twin wire-end ferrules, max. Type of connection Wire connection cross section AWG, min. Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max. Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max. Wire connection cross-section, finely stranded, min. 1.5 mm² top 4 0.75 mm² Tension clamp connection CSA rating data   Certificate No. (CSA) Voltage size C (CSA) Wire cross section min. (CSA)   Conductors for clamping (rated connection)   Blade size Clamping range, min. Gauge to IEC 60947-1 Stripping length Twin wire-end ferrules, min. Wire connection cross section AWG, max. Wire connection cross section, finely stranded, max. Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min. Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min. Wire connection cross-section, solid core, max.   0.4 x 2.0 mm 0.05 mm² B1 10 mm 0.5 mm² AWG 16 1.5 mm² 0.5 mm² 0.5 mm² 1.5 mm²         Wire connection cross-section, solid core, min. AWG 28 1.5 mm² 1.5 mm² 0.5 mm² 0.5 mm² Creation date December 10, 2018 10:52:27 PM CET   Catalogue status 07.12.2018 / We reserve the right to make technical changes. 2     Data sheet Z-series ZDK 1.5   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Rating data   Rated cross-section Rated current Standards Rated impulse withstand voltage   1.5 mm² 17.5 A IEC 60947-7-1 6 kV         Rated voltage Current at maximum wires Volume resistance according to IEC 60947-7-x Pollution severity 500 V 17.5 A 3.66 mΩ 3 UL rating data   Certificate No. (cURus) E60693 Conductor size Factory wiring min. (cURus) 28 AWG Conductor size Field wiring min. (cURus) 28 AWG Current size D (cURus) 10 A Voltage size D (cURus) 300 V         Conductor size Factory wiring max. (cURus) 16 AWG Conductor size Field wiring max. (cURus) 16 AWG Current size B (cURus) 10 A Voltage size B (cURus) 300 V               ETIM 4.0 ETIM 6.0 eClass 5.1 eClass 7.1 eClass 9.0       Classifications   ETIM 3.0 ETIM 5.0 UNSPSC eClass 6.2 eClass 8.1 eClass 9.1   EC000897 EC000897 30-21-18-01 27-14-11-20 27-14-11-20 27-14-11-20 EC000897 EC000897 27-14-11-18 27-14-11-20 27-14-11-20 Approvals   Approvals ROHS   Conform Downloads   Approval/Certificate/Document of Conformity Brochure/Catalogue Engineering Data Engineering Data   DE_PT1101_20160415_100_ISSUE01.pdf CAT 1 TERM 16/17 EN EPLAN, WSCAD, Zuken E3.S STEP Safety note   Safety notice   Safety Information Creation date December 10, 2018 10:52:27 PM CET   Catalogue status 07.12.2018 / We reserve the right to make technical changes. 3     Data sheet Z-series ZDK 1.5   Drawings Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Creation date December 10, 2018 10:52:27 PM CET   Catalogue status 07.12.2018 / We reserve the right to make technical changes. 4