1820840000

    Data sheet W-Series WDU 50N Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com     Klippon® Connect with clamping yoke Technology The high reliability and variety of designs of the terminal blocks with clamping yoke connections make planning easer and optimises operational safety. Klippon® Connect provides a proven response to a range of different requirements. General ordering data   Type Order No. Version GTIN (EAN) Qty.   WDU 50N 1820840000 Feed-through terminal, Screw connection, 50 mm², 1000 V, 150 A, Dark Beige 4032248318117 10 pc(s). Creation date October 23, 2018 4:31:41 PM CEST   Catalogue status 11.10.2018 / We reserve the right to make technical changes. 1     Data sheet W-Series WDU 50N   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions and weights   Width Height Depth Depth including DIN rail   18.5 mm 70 mm 69.6 mm 70.6 mm         Width (inches) Height (inches) Depth (inches) Net weight 0.728 inch 2.756 inch 2.74 inch 84.38 g -60 °C   Continuous operating temp., max. 130 °C Wemid V-0     Colour   Dark Beige DEMKO14ATEX1338U 690 V 50 mm² 126 A For operating temperature range see EC Design Test Certificate / IEC ExCertificate of Conformity II 2 G D           Certificate No. (IECEX) Current (ATEX) Max. voltage (IECEX) Wire cross section max. (IECEX) Marking EN 60079-7 IECEXULD14.0005U 126 A 690 V 50 mm²     Screw connection, for screwable crossconnection, closed   Tightening torque (clamping screw for aluminium conductors)   End cover plate required           Number of levels Number of potentials per tier PE connection N-function PEN function Temperatures   Continuous operating temp., min.   Material data   Material UL 94 flammability rating   Rating data IECEx/ATEX   Certificate No. (ATEX) Max. voltage (ATEX) Wire cross section max. (ATEX) Current (IECEX) Operating temperature range Ex 2014/34/EU label   Ex eb II C Gb System specifications   Version Tightening torque (clamping screw for copper conductors) Number of potentials No. of clamping points per level Levels cross-connected internally Mounting rail PE function   3.5...6 Nm 1 2 No TS 35 No 6 Nm No 1 1 No No Yes 2 clampable conductors (H05V/H07V) with equal cross-section (rated connection)   Cross-section for connected wire, stranded, two clampable wires, min. Wire connection cross section, finely stranded, two clampable wires, min. Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, 2 clampable wires, min.   6 mm² 6 mm²       6 mm² Cross-section for connected wire, stranded, two clampable wires, max. 16 mm² Wire cross-section, finely stranded, two clampable wires, max. 16 mm² Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, 2 clampable wires, max. 16 mm² Additional technical data   Explosion-tested version Number of similar terminals Type of mounting   No 1 Snap-on       Installation advice Open sides   Direct mounting closed Creation date October 23, 2018 4:31:41 PM CEST   Catalogue status 11.10.2018 / We reserve the right to make technical changes. 2     Data sheet W-Series WDU 50N   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data CSA rating data   Certificate No. (CSA) Current size C (CSA) Voltage size B (CSA) Voltage size D (CSA) Wire cross section min. (CSA)   200039-1057876 150 A 600 V 600 V 8 AWG           Current size B (CSA) Current size D (CSA) Voltage size C (CSA) Wire cross section max. (CSA)         Clamping range, max. 70 mm² Clamping screw M6 Connection cross-section, stranded, min. 6 mm² Gauge to IEC 60947-1 B10 Stripping length 24 mm Tightening torque, min. 3.5 Nm Wire connection cross section AWG, max. AWG 0 Wire connection cross section, finely stranded, max. 50 mm² Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min. 6 mm² Wire connection cross-section, solid core, max. 16 mm²   150 A 5A 600 V 0 AWG Conductors for clamping (rated connection)   Blade size Clamping range, min. Connection cross-section, stranded, max. Connection direction Number of connections Tightening torque, max. Type of connection Wire connection cross section AWG, min. Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max. Wire connection cross-section, finely stranded, min. Wire connection cross-section, solid core, min.   S4 (DIN 6911) 10 mm² 70 mm² on side 2 6 Nm Screw connection AWG 8 50 mm² 10 mm² 6 mm²                 Rating data   Rated cross-section Rated current Standards Rated impulse withstand voltage Surge voltage category   50 mm² 150 A           Rated voltage Current at maximum wires Volume resistance according to IEC 60947-7-x Pollution severity   E60693 10 AWG 10 AWG 600 V         Conductor size Factory wiring max. (UR) 0 AWG Conductor size Field wiring max. (UR) 0 AWG Current size C (UR) 150 A   EC000897 EC000897 30-21-18-11 27-14-11-20 27-14-11-20 27-14-11-20             ETIM 4.0 ETIM 6.0 eClass 5.1 eClass 7.1 eClass 9.0   IEC 60947-7-1 8 kV III 1,000 V 192 A 0.21 mΩ 3 UL rating data   Certificate No. (UR) Conductor size Factory wiring min. (UR) Conductor size Field wiring min. (UR) Voltage size C (UR)   Classifications   ETIM 3.0 ETIM 5.0 UNSPSC eClass 6.2 eClass 8.1 eClass 9.1   EC000897 EC000897 27-14-11-20 27-14-11-20 27-14-11-20 Creation date October 23, 2018 4:31:41 PM CEST   Catalogue status 11.10.2018 / We reserve the right to make technical changes. 3     Data sheet W-Series WDU 50N   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Product information   Descriptive text ordering data Descriptive text technical data Instructions for accessories   1000 V UL and CSA for usage groups B and C: can be used with isolating DIN rails and when using WTW-EN partitions. 1000 V DC rated voltage tested. Auxiliary connection for additional conductor "WZAD 50N" 1872720000 (up to 10 mm², 41 A). Crossconnections, see section "W series accessories". Approvals   Approvals ROHS   Conform Downloads   Approval/Certificate/Document of Conformity Brochure/Catalogue Engineering Data Engineering Data User Documentation   CFAT_WDU 50N.pdf IECEXULD14.0005U_e.pdf DE_PT1001_20160418_805_ISSUE01.pdf ACF-ATEX_4786180920 CAT 1 TERM 16/17 EN EPLAN, WSCAD, Zuken E3.S STEP NTI_ IECEx_WDU-WPE 50N.pdf Safety note   Safety notice   Safety Information Creation date October 23, 2018 4:31:41 PM CEST   Catalogue status 11.10.2018 / We reserve the right to make technical changes. 4     Data sheet W-Series WDU 50N   Drawings Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Creation date October 23, 2018 4:31:41 PM CEST   Catalogue status 11.10.2018 / We reserve the right to make technical changes. 5