1821490000

    Data sheet OMNIMATE Signal - series LM LM 5.00/04/90 3.5SN OR BX Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com     PCB terminal with proven clamping yoke connection at 5.00 and 5.08 mm pitch. Conductor outlet direction 90°, 135° and 180°. Suitable for conductor cross-sections up to 2.5 mm². • 0.13 - 2.50 mm² (IEC) / 26 - 14 AWG (UL) • 630 V (IEC) / 300 V (UL) • 17.5 A (IEC) / 20 A (UL) General ordering data   Type Order No. Version GTIN (EAN) Qty. Product data Packaging   LM 5.00/04/90 3.5SN OR BX 1821490000 PCB terminal, 5.00 mm, No. of poles: 4, 90°, Solder pin length (l): 3.5 mm, tinned, Orange, Clamping yoke connection, Clamping range, max. : 2.5 mm², Box 4032248321612 50 pc(s). IEC: 630 V / 17.5 A / 0.2 - 2.5 mm² UL: 300 V / 15 A / AWG 24 - AWG 14 Box Creation date August 14, 2018 3:56:40 PM CEST   Catalogue status 27.07.2018 / We reserve the right to make technical changes. 1     Data sheet OMNIMATE Signal - series LM LM 5.00/04/90 3.5SN OR BX   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions and weights   Net weight   5.22 g       Wire connection method                         Conductor outlet direction Pitch in inches (P) Fitted by customer Solder pin length (l) Solder eyelet hole diameter (D) Number of solder pins per pole Screwdriver blade standard Tightening torque, max. Stripping length L1 in inches Touch-safe protection acc. to DIN VDE 57 106         Colour Insulating material group Insulation resistance System parameters   Product family OMNIMATE Signal - series LM Mounting onto the PCB THT solder connection Pitch in mm (P) 5 mm No. of poles 4 Max. adjacent poles per row 24 Solder pin dimensions 0.95 x 0.8 mm Solder eyelet hole diameter tolerance (D)+ 0,1 mm Screwdriver blade 0.6 x 3.5 Tightening torque, min. 0.4 Nm Clamping screw M 2.5 L1 in mm 15 mm Touch-safe protection acc. to DIN VDE 0470 IP 20 Volume resistance 1.20 mΩ   Clamping yoke connection 90° 0.197 inch Yes 3.5 mm 1.3 mm 1 DIN 5264 0.5 Nm 6 mm 0.591 inch Safe from finger touch Material data   Insulating material Colour chart (similar) CTI UL 94 flammability rating Contact surface Tinning type Storage temperature, min. Max. relative humidity during storage Operating temperature, max. Temperature range, installation, max.   Wemid (PA) RAL 2000 ≥ 600 V-0 tinned matt -25 °C 80 % 120 °C 120 °C               Contact material Coating Layer structure of solder connection Storage temperature, max. Operating temperature, min. Temperature range, installation, min.   Orange I ≥ 108 Ω Copper alloy 1-3 μm Ni, 4-6 μm SN 1-3 µm Ni / 4-6 µm Sn matt 55 °C -50 °C -25 °C Conductors suitable for connection     Clamping range, min. 0.2 mm²   Wire connection cross section AWG, min. AWG 24   Solid, min. H05(07) V-U 0.2 mm²   Flexible, min. H05(07) V-K 0.2 mm²   w. plastic collar ferrule, DIN 46228 pt 4, min. 0.25 mm²   w. wire end ferrule, DIN 46228 pt 1, min 0.25 mm² Plug gauge acc. to EN 60999 a x b; Ø 2.4 mm x 1.5 mm; 1.9mm     Clamping range, max. 2.5 mm² Wire connection cross section AWG, max. AWG 14 Solid, max. H05(07) V-U 2.5 mm² Flexible, max. H05(07) V-K 2.5 mm² w. plastic collar ferrule, DIN 46228 pt 4, max. 1.5 mm² w. wire end ferrule, DIN 46228 pt 1, max. 1.5 mm²   Creation date August 14, 2018 3:56:40 PM CEST   Catalogue status 27.07.2018 / We reserve the right to make technical changes. 2     Data sheet OMNIMATE Signal - series LM LM 5.00/04/90 3.5SN OR BX   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Rated data acc. to IEC   tested acc. to standard Rated current, max. no. of poles (Tu=20°C) Rated current, max. no. of poles (Tu=40°C) Rated voltage for surge voltage class / pollution degree III/2 Rated impulse voltage for surge voltage class/ pollution degree II/2 Rated impulse voltage for surge voltage class/ contamination degree III/3       Rated current, min. no. of poles (Tu=20°C) Rated current, min. no. of poles (Tu=40°C) Rated voltage for surge voltage class / pollution degree II/2 Rated voltage for surge voltage class / pollution degree III/3 Rated impulse voltage for surge voltage class/ pollution degree III/2 Short-time withstand current resistance   Certificate No. (CSA)         Rated voltage (use group D) Rated current (use group D) Wire cross-section, AWG, max.     Certificate No. (cURus) 300 V 15 A AWG 24 Specifications are maximum values, details see approval certificate.         Rated voltage (use group D) Rated current (use group D) Wire cross-section, AWG, max.   Box 75.000     VPE length VPE height 67.000 145.000 EC001284 EC002643 30-21-18-01 27-44-04-01 27-44-04-01           ETIM 4.0 ETIM 6.0 eClass 6.2 eClass 8.1 eClass 9.1 EC002643 EC002643 27-26-11-01 27-44-04-01 27-44-04-01 IEC 60664-1, IEC 61984 16 A 14.2 A 320 V 4 kV 4 kV         17.5 A 17.5 A 630 V 250 V 4 kV 3 x 1s with 120 A Rated data acc. to CSA   Institute (CSA) Rated voltage (Use group B) Rated current (use group B) Wire cross-section, AWG, min. Reference to approval values   300 V 18 A AWG 24 Specifications are maximum values, details see approval certificate. 200039-1815154 300 V 10 A AWG 14 Rated data acc. to UL 1059   Institute (cURus) Rated voltage (use group B) Rated current (use group B) Wire cross-section, AWG, min. Reference to approval values   E60693 300 V 10 A AWG 14 Packaging   Packaging VPE width   Classifications   ETIM 3.0 ETIM 5.0 UNSPSC eClass 7.1 eClass 9.0   Creation date August 14, 2018 3:56:40 PM CEST   Catalogue status 27.07.2018 / We reserve the right to make technical changes. 3     Data sheet OMNIMATE Signal - series LM LM 5.00/04/90 3.5SN OR BX   Technical data Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Notes   Notes • Rated current related to rated cross-section & min. No. of poles. • Wire end ferrule without plastic collar to DIN 46228/1 • Wire end ferrule with plastic collar to DIN 46228/4 • P on drawing = pitch IPC conformity   • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request. Approvals   Approvals ROHS   Conform Downloads   Approval/Certificate/Document of Conformity Brochure/Catalogue Engineering Data Engineering Data   Declaration of the Manufacturer FL DRIVES EN FL ANALO.SIGN.CONV. EN MB DEVICE MANUF. EN FL DRIVES DE CAT 2 PORTFOLIOGUIDE EN FL BUILDING SAFETY EN FL APPL LED LIGHTING EN FL INDUSTR.CONTROLS EN FL MACHINE SAFETY EN FL HEATING ELECTR EN FL APPL_INVERTER EN FL_BASE_STATION_EN FL ELEVATOR EN FL POWER SUPPLY EN FL 72H SAMPLE SER EN PO OMNIMATE EN EPLAN, WSCAD LM.zip STEP Creation date August 14, 2018 3:56:40 PM CEST   Catalogue status 27.07.2018 / We reserve the right to make technical changes. 4     Data sheet OMNIMATE Signal - series LM LM 5.00/04/90 3.5SN OR BX   Drawings Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Dimensional drawing Graph Derating curve valid for 5.00 & 5.08 pitch Creation date August 14, 2018 3:56:40 PM CEST   Catalogue status 27.07.2018 / We reserve the right to make technical changes. 5 Wave Solder Profile   Recommended wave solderding profiles Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com   Single Wave:   260 Contact time appr. 3 sec. 260 °C 255 °C 250 °C 240 220 200 Temperature [°C] 180 160 140 appr. 150 °C Preheating 120 100 Cooling rate < 6 °K/s 80 60 Typical process Prozess limits Temperature on board 40 Heating rate < 3 °K/s 20 0 0 20 40 60 80 100 120 time [s] 140 160 180 200 220 240 Double Wave: 255 °C Total contact time max. 10 sec. 260 240 260 °C 250 °C 220 200 Temperature [°C] 180 160 140 appr. 150°C Preheating 120 100 Cooling rate < 6 °K/s 80 60 Typical process Process limits Temperature on board 40 Heating rate < 3 °K/s 20 0 0 20 40 60 Wave soldering profiles 80 100 120 time [s] 140 160 180 200 220 240 Wired connection elements should be processed in accordance with the DIN EN 61760-1 standard. We have included two recommendations for practical wave soldering profiles, with which Weidmüller PCB terminals and connectors are qualified. When choosing a suitable profile for your application, the following factors also need to be considered: - PCB thickness - Proportion of Cu in the layers - Single/double-sided assembly - Product range - Heating and cooling rates The single and double wave profiles each indicate the recommended operating range, including the maximum soldering temperature of 260°C. In practice, the maximum soldering temperature is quite often well below the above maximum profile.   We reserve the right to make technical changes.