1896170000

Product catalogue | Terminals | Push In Technology | Modular PE terminals | 2.5 / 4 mm² General ordering data Order No. Part designation Version EAN Qty. Product notes Note, ordering data Note, technical data Note, accessories PT OKIECEx/ATEX rating data EU-type examination certificate Download, German Download English IECEx Certificate of Conformity Download ATEX conductor cross-section IECEx conductor cross-section Voltage when using cross-connections Operating temperature range 1896170000 PPE 2.5/4 Earth terminal, 4 mm², Push-In, Wemid, green/ yellow, TS 35 4032248511211 50 pc(s). For use with 4 mm² conductors, with wire-end ferrules and cross-section-optimized plastic collars (order no. 9203630000) 4 mm² conductor should be processed after crimping (according to Euro-Norm EN 60947-1), for example with PZ6/5, order no. 9011460000. Detailed information for working with twin ferrules can be found in the P Series Accessories section. Marking EN 60079-7 Marking ATEX Directive 94/9/EC KEMA06ATEX0177U KEMA06ATEX0177U_d.pdf KEMA06ATEX0177U_e.pdf IECEXKEM06.0032U IECEXKEM06.0032U_e.pdf 4 mm² 4 mm² CrossConnectionGuide.pdf Einsatztemperaturbereich siehe EGBaumusterprüfbescheinigung/IECEx-Certificate of Conformity Ex e II Ex II 2 G D Additional technical data Colour of insulating material Connection direction End plate required Explosion-tested version "Ex e" Installation advice green/yellow top Yes Yes TS 35 -1- Product catalogue | Terminals | Push In Technology | Modular PE terminals | 2.5 / 4 mm² Additional technical data Insulating material Levels cross-connected internally No. of levels No. of terminal strips per level Open sides Operating temperature range Type of connection Type of mounting UL 94 flammability rating of insulation material Version Conductors for clamping (rated connection) Clamping range, min. Clamping range, max. Type of connection Connection direction No. of connections Stripping length Blade size Solid, min. Solid, max. Flexible, min. Flexible, max. Flexible with ferrule, min. (DIN 46228/1) Flexible with ferrule, max. (DIN 46228/1) Flexible, min., ferrule with plastic collar (DIN 46228 pt 4) Flexible, max., ferrule with plastic collar (DIN 46228 pt 4) Twin wire-end ferrule, min. Twin wire end ferrule, max. AWG conductor size, min. AWG conductor size, max. Wemid No 1 2 right - 50 °C, + 120 °C Plugged Snap-on V-0 Earth terminal 0.13 mm² 6 mm² Push-In top 2 12 3.0 x 0.5 mm 0.5 mm² 6 mm² 0.5 mm² 4 mm² 0.5 mm² 4 mm² 0.5 mm² 4 mm² 0.5 mm² 2.5 mm² AWG 26 AWG 10 Dimensions Width Height of lowest version Length TS 35 offset 5.1 mm 36 mm 53 mm 26 mm Rating data Rated cross-section Standards Pollution severity 4 mm² IEC 60947-7-2 3 -2- Product catalogue | Terminals | Push In Technology | Modular PE terminals | 2.5 / 4 mm² Approvals Approvals institutes Downloads STEP 1896170000_41631_PPE_2.5_4_2AN_STP.stp Classifications eClass 4.1 eClass 5.0 eClass 5.1 27-14-03-05 27-14-03-05 27-14-03-05 Similar products Order No. 1918710000 1896200000 1896160000 Part designation PDK 2.5/4 PE PPE 2.5/4/3AN PPE 2.5/4/4AN Version Earth terminal, 4 mm², Push-In, Wemid, green/yellow, TS 35 Earth terminal, 4 mm², Push-In, Wemid, green/yellow, TS 35 Earth terminal, 4 mm², Push-In, Wemid, green/yellow, TS 35 -3-